When you own a home, it’s easy for household expenses to spiral out of control. Every year, the average homeowner is in the unenviable position of spending thousands of dollars on owning and maintaining a home- and that’s just when everything is going well! If an emergency hits, many homeowners have to make sacrifices they can ill afford just to keep the home up and running. The best strategy to avoid disaster is to work on cutting down the everyday household expenses associated with owning a home.

So where does the money really go? On average, American homeowners spend about 34 percent of their income on home expenses. Paying for the house itself, of course, is the largest chunk of that expenditure, but does it surprise you to know that utilities make up the next largest amount? Most Americans spend about seven percent of their income on utilities; that’s more than what they spend on entertainment, clothing for the family and even health care! Obviously, that’s an area where it makes sense to find ways to scale back. If you live in Texas, it’s even more important than it is for people in other states as Texas electricity rates are 30 percent higher than rates elsewhere.

To save money on electricity, you need to understand it. Electric companies measure energy usage in kWh, which is a measurement of the hours you spend using 1000 watts. By lowering your kWh, you will, of course, lower your electricity cost, but where do all those kilowatt-hours go? Appliances can be huge energy hogs but so can game systems, televisions and computers. Older homes are often ill-equipped to handle the energy demands of a modern lifestyle, and this can be not only costly but dangerous, as faulty electrical systems can lead to house fires. Modernizing your home can save on more than just household expenses- it might also save your life.

Fortunately, there are some easy ways to save on energy (and its associated costs). If your home is more than 20 years old, get your electrical system checked out by a professional to determine if you need any upgrades. Buy ENERGY STAR compliant appliances whenever possible, and turn off anything you’re not using, from lights and appliances to your Xbox 360.

relatively high ceilings. Drive by any industrial park, warehouse, or factory, and walk inside and what you will see is a high bay light.

But walk into any factory or warehouse and you will see different styles and options, wattage’s and configurations. Traditional high bay fixtures that were once common place were Mercury Vapor, which were then replaced with High Pressure Sodium and Metal Halide bulbs. As new technologies were introduced, and old technologies became more common, the old HID bulbs were replaced with Induction and Fluorescent light sources. And more recently with the more wide spread approval and popularity of LED, we started to see conversions from these older technologies to the latest energy saving LED High Bays.

A High Bay Fixture, depending on the light source, can take on many forms and shapes. If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. These bulbs typically come in two wattage’s, 400 and 1000. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. Fluorescent can dim, but you need special ballasts for them. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away.

Saffron’s Drift Light is here to help. The Drift Light is like a normalAmanda Kooser reviewed the Drift Light earlier in the month. Kooser reports that during the first night, she was highly aware of the way the light was dimming, but during the next few nights, she never caught the light turning off because she was already asleep. As somone who claims to have “notorious” sleeping troubles, this would imply that the Drift Light works pretty well.

Kooser says that since you know the LED light bulb will dim over the course of 37 minutes, it’s easy to plan for the light to turn off around the time you want to fall asleep. The most compelling statement Kooser makes about the Drift Light: “There is something soothing about the world dimming around you. It’s like being a kid with an early bedtime, sensing the sun set outside your window.”

I’m interested to see if this product will become popular. Have you ever tried anything like this to improve your sleeping habits? Leave a comment, and let us know!