1.  Size and install smartly:  Whether you are installing a crystal chandelier over your dining room table or as a central design feature in your master bedroom, the diameter and height of your fixture must be in proportion to other items in the room.  The diameter of a dining table fixture should be 12 inches less than the diameter of the dining table.  The height of the chandelier should allow for a clearance of 30 inches from table top to the bottom of the fixture.

Quoizel’s “Tricia” chandelier adds elegance to this contemporary dining room.  * Interior design by Sandra D’Amata International, Inc.

If your crystal chandelier will be a central focal point in your foyer, living room or master bedroom, take into account your ceiling height and choose a chandelier that may be installed to leave at least a 7-foot clearance from the floor to the bottom of the chandelier.

2.  Reflect Resplendence:  The true beauty in a crystal chandelier extends far past the light source, decorative finishing and crystal configuration.  Crystal facets reflect and refract a brilliant array of colors and illuminating effects, especially when combined with sunlight and/or electric light sources.  Matte finishes on furniture and surrounding walls work well with crystal illumination.  Avoid creating glare and unflattering shadows off metallic or shiny surfaces.

3.  Choose the Right Bulb: Most chandelier bulbs will be candelabra-based, yet what type of candelabra bulb you choose will make a tremendous difference in both the total presentation of your chandelier and the overall illumination in your room.

Crystorama’s “Mercer” chandelier–installed with dimmable LED candelabra bulbs–provides magnificent illumination in this master bathroom.*

Frosted bulbs provide a more subdued illumination. They are recommended for most traditional dining room chandeliers.  Clear bulbs work well with chrome finished retro-modern chandeliers and may add to the radiant sparkle of modern crystal chandeliers.

For a more traditional look, flame tip bulbs are the right choice.  Flame tip bulbs also look best in chandeliers with faux drip-candle holders.  Torpedo bulbs are less tapered and present a contemporary look.  Round bulbs add an eclectic vibe to a traditional chandelier.  Uniquely-shaped and/or textured candelabra bulbs may add a custom-designed artistry to your chandelier.

The search for commercial lighting systems can be confusing, misleading, and overwhelming at times. With all of the different terms, labels, and technologies being used how can anyone expect you to make any decisions with all of that going on?

Well, this post is going to at least relieve your confusion about DesignLights Consortium vs EnergyStar approved and qualified lighting products. There is a difference, and you need to be well aware of what it is when you are looking into a new lighting system for commercial Click here to read it, then come back to finish the rest (opens in a new window)!

The major difference between DLC and EnergyStar is that DLC is only for commercial lighting products while EnergyStar is more focused on residential purposes and applications, with a minor hint of commercial lighting in there as well. This makes DLC the more “go to” organization when it comes to commercial lighting qualifications as they are seen as the experts on commercial lighting products and technologies.

Anyways, when it comes to becoming EnergyStar qualified for a lighting product, a product needs to pass these (along with others) guidelines to be able to be EnergyStar qualified:

Conclusion

After this quick, simple, and brief overview of the differences between EnergyStar and DLC; we hope you’ve found some light on the topic (get it, light).

In a general sense, most of your commercial lighting purchases will include DLC qualified products, especially when buying for warehouses, factories, parking lots, street lights, and the like all except for those listed.

Are you confused on any point? Have any comments or questions? Comment them below and we will surely find an answer or response!

In general, if you have a mechanical aptitude you can perform some minor electrical work as do-it-yourself projects. At the very least, you can remove the covers on your switches and outlets to paint, and you know how to check your circuit breakers when power goes out. However, most homeowners are going to need a licensed electrician on occasion for a number of reasons.

The celebration continues! Pegasus Lighting is 15 this year, and to commemorate our anniversary we’re creating monthly blog posts about popular culture 15 years ago. You know, just to remember where we came from. July 1999 was a tumultuous month. There were some inspirational moments, tragic moments, and just plain bizarre moments, like when we intentionally crashed a spacecraft into the moon. Enjoy this walk down memory lane. Don’t forget your baggy pants, hair gel, and Christina Aguilera CDs.

1. Moon Boom

via Wikipedia

Mercury-Redstone 4, the second U.S. spaceflight, which launched in July 1961, resulted in the near-death of astronaut Virgil I. Grissom and the sinking of the Liberty Bell 7 spacecraft. The vessel was rescued from the depths of the Atlantic in July 1999.

 3. Lance Does a Victory Dance (Possibly Drug-Induced)

Good old Lance Armstrong of LIVESTRONG and doping fame won his first Tour de France in July 1999. It was the beginning of an Armstrong era that would later be tainted by the fact that Armstrong was doing unethical things to give him the edge to win. Live Strong? Even if it means cheating? Thanks a lot, Lance. Great role model. Pshh.

4. Crash in Martha’s Vineyard

Off the coast of Martha’s Vineyard, a plane piloted by John F. Kennedy Jr. crashed, killing him and his wife Caroyln Bessette Kennedy and her sister Lauren Bessette. Very sad. Sorry for depressing you. But this is what was – phew! – I almost said “This is what was going down.” That would have been indelicate phrasing. This is what was HAPPENING in July 1999.

5. HARRY POTTAH!

In July 1999, the third novel in the HARRY POTTER series, HARRY POTTER AND THE PRISONER OF AZKABAN, was published in the UK. It sold 68,000 copies in the first three days and won a bunch of prestigious literary awards. Cha-ching!

6. A Blur of a Man

In a bizarre event, a Japanese man named Yuji Nishizawa hijacked an All Nippon Airways Boeing 747 and stabbed one of the pilots with a 8″ kitchen knife before being subdued by the crew. The pilot died shortly after the emergency landing, and the perpetrator was apprehended. Because he was diagnosed with mental illness, he was given a sentence of life in prison. Weirdly, he had discovered a way to smuggle weapons on planes, and, shortly before the incident, he had written to the airline alerting them to the security flaw and asking for a job in airport security. No one listened, until the hijacking. Then, the security flaw was fixed in all Japanese airports. Some people, man. Makes you want to go back in time and slap some sense into him.

8. Woodstock Again… Again

They tried to recreate the Woodstock music festival in 1994. What happened? Violence and destruction. So they figured, hey! Let’s give it another go! So, in July 1999, Woodstock 99 was held in Rome, NY. What happened? Violence and destruction. And sexual assault. Sorry Limp Bizkit fans, this is not going to work out. There were no more Woodstocks. (Or Limp Bizkit fans, incidentally.)

9. Andre Is Wimble DONE!

On the Fourth of July, in Wimbledon, England, under a blazing sun, Pete Sampras and Andre Agassi were battling it on the grass out for glory and riches. And a real big trophy. Pete Sampras defeated Agassi in three sets and called the match the “best tennis of [his] life.”

10. It’s Electric! (I know. Sorry.)

Florida commits its last act of execution by electric chair. The convict? Allen Lee Davis. I won’t go into detail about his heinous crimes. Or his execution. But it was shocking enough – oops I did it again! – I mean APPALLING enough for death by electric chair to be considered cruel and unusual punishment from then on in the state of Florida.

11. Hello Safeco

The inaugural baseball game was held at the Seattle Mariners’ Safeco Field in July, 1999. The field looked great. But the Mariners lost to the San Diego Padres, 2-3. Womp womp.

12. American Why? Just Why?

Stanley Kubrick’s latest film EYES WIDE SHUT was released in the middle of the month. Mask party, anyone?

14. Teenie Genie in a Bottle

If you are in the market for a new solar panel, you’re probably already sold on the incredible energy and long-term monetary savings that come from a home solar system. And even if you understand the process of installing the solar system, does that necessarily mean that your home is ready for the installation? In this post, we take a quick look at the process of preparing your home for solar panel installation.

One of the first things to consider is the structural stability of the roof. Is it strong enough to support your new solar panels? Consider getting a building inspection to make sure the roof is equal to the task.

In addition to the structure, you’ll want to take a good look at the surrounding area. Are there tree branches overhanging the future solar array? The debris from trees and the possible trauma from branches can inhibit and even damage solar panels. Such trees are best trimmed for near-term and future growth.

Any structures or devices in the area of the solar array need to be removed or relocated. Antennas and ceiling vents are particularly crucial pieces to work around. If your roof prevents easy access to the solar panels, think about finding a way around that. Some roofs don’t encourage access and need hatches built in so you can easily reach panels for repair.

Of course, we have plenty of experience devising and consulting on such solar projects. We’ll help you decide on the most appropriate changes to make in your home and yard to make the perfect solar installation work for you. Don’t hesitate to call us so we can start the process right away. We get the ball rolling with a free consultation over the phone. We’ll check out your home with satellite data before we even visit. By the time we’re done with our first site visit, you’ll have a good idea of what our installation and the necessary preparation mean for you.