Like upgrades in the cell phone industry, the electrical industry has developed great new ways to serve and protect home owners. One of the best inventions of the past few decades is the GFI outlet.

What is a GFI outlet?

GFI stands for fault circuit interrupter. In layman’s terms it is the little button that sits between the two outlets in a double wall outlet. Some of these have a red test button and white set button and others have two white buttons.

What this means for those who have these new breakers is that instead of blowing a fuse or tripping a circuit breaker during an overload, the button will pop out and there will be no electricity in that outlet. It also will react if an electrical device comes in contact with water eliminating the possibility of shock.

You will find these safety devices around areas that may be subjected to damp areas like bathrooms, kitchens, hot tubs, swimming pools and outside plugs.GFIs are installed on electrical outlets to regulate power and direct currents. In most areas they are required by code to be placed in strategic areas.

What could be wrong?

There could be several different issues. However, we need to inspect a unit. It is not an answer we can readily answer over the phone. It could be the actual receptacle and it could be wiring leading to the receptacle. It is not a DIY job. This is a job for someone who knows how to cut the current so there are no live wires and investigate wall deep.

Underwriter’s Laboratories, LLC says, “By installing GFCIs in every home in the United States, the U.S. Consumer Product Safety Commission estimates that more than two-thirds of the approximately 300 electrocutions occurring each year could be prevented.”

A working unit could save your life or the life of one of your family members. You want a license, bonded professional to handle this repair.

Things to tell your electrician

There are things you can check prior to the arrival of your service professional which may give him a head start on repairs. Are all other outlets in the area active or not? Have you checked your circuit breaker to see if it has not shut down the zone?

There is another thing to keep in mind. If you have an older home or condo you can have new GFI’s installed where you need them – in the bathroom, kitchen or wherever. It is an investment in the value of your home and your peace of mind.

The little community of Victoria Park in central Florida is beating out Los Angeles when it comes to saving electricity on street lighting. Last November, I wrote a blog post about the street lighting program here in Los Angeles, which is currently yielding higher-than-expected energy savings — 60% compared to the expected 40%. Well, that’s something to crow about regardless of what they’re doing in Victoria Park.

The Nitty-Gritty in L.A.

Electricians are using LEDs to replace the conventional incandescent bulbs in 140,000 Los Angeles street lights. Maintenance costs for LEDs, though not as significant as electric bills, also take a smaller bite. Nothing to be sneezed at! LEDs are good for the City budget, good for climate change, and good for energy independence.

An LED (Light Emitting Diode) is a light created by the kind of tiny parts that are in a computer. LEDs are used, for example, in many kids’ light sabers. They’re brighter and use a lot less electricity than the incandescents that you and I screwed into sockets when we grew up. As for what Victoria Park is up to….

Electricians Retrofit Gas Lights in Victoria Park, Florida

Victoria Park is now upping the ante. Electricians are retrofitting its gas-burning street lights with special LEDs that will save the community 92% on its combined energy and maintenance bills.

Victoria Park is a planned community in central Florida. Residents enjoy the charm of real gas-lit street lights, but the expense is a concern. As the community builds out, the annual costs for gas and maintenance were being projected to top $1,000,000 a year, just for street lighting.

When residents formed a committee to look into alternatives, the committee hit upon low-voltage LEDs. While typical house current runs at 110 volts, low-voltage current can run at around 24 volts, reducing power needs.

Victoria Park is now retrofitting their existing street lights with low-voltage LEDs. The retrofits, an innovation by Solas Ray™ Lighting in Anderson Indiana, look, for all the world, like real gas lights. They mimic the look of a candle flame. The lights create charm and a warm glow, but also five times more light than each pole would create with gas. Not to mention the 92% energy and maintenance savings. In fact, the Mayor of the City of DeLand, where Victoria Park is located, awarded Solas Ray a proclamation of appreciation for saving Victoria Park residents nearly half a million dollars in 2010.

Fortunately for all of us, in the energy efficiency race, we all win as cities out-do each other to help out their budgets and help the environment.

Want to save energy in your home or business?

One of the specialties of my electrical contracting company, The Electric Connection, is energy-efficient lighting. Call us to discuss your lighting needs (800) 990-9490.

Kim Hopkins

CEO, The Electric Connection.

Visit our company profile.

Anytime you find yourself wanting an electrical safety inspection, it’s important to know what kinds of questions you need to ask. A lot of the time people are stuck with hidden fees or things that they are unaware of due to the lack of curiosity. Even if it seems so simple, it’s always best to ask the right questions to an electrician especially when it comes down to your home’s safety and your family’s well-being. When you see the lights start to flicker or your outdated electrical system giving you trouble, it’s time to call for a repair or maintenance check. Having an electrical safety inspection by a professional contractor will help flag any warning signs that might arise in the future. So here are some questions that can prepare you so you know what to ask when it’s time to conduct an electrical safety inspection.

Usually, when we want to hire somebody we always like to know that who we’re hiring has had an education within that field. However, when it comes to hiring an electrician to conduct an electrical safety inspection, experience and how much of it is especially important. Experienced professionals not only have seen a lot and can provide effective solutions, but they also recognize the importance of high-quality performance and customer service. By asking about their experience, you’ll be able to determine how qualified that contractor is to handle your electrical safety inspection.

When it comes time for an electrical safety inspection, you want to make sure hire an electrician that has a valid electrical contractor’s license. This will make you feel more comfortable knowing that the person you’re hiring is educated and trained to perform a high-quality electrical safety inspection since they are being held to a high standard as a licensed professional.

During an electrical safety inspection, things may come up where the electrician might either want to fix or restore a certain business. So, asking about an estimate and whether additional work is covered is always a great question to ask.