Have you been calling for help from an electrician in Los Angeles more often than you’d care to admit? If you have old wiring, whenever you’ve had an electrical service call the electrician should have made you aware of the wiring situation. A knowledgeable Los Angeles electrician will tell you when your electrical wiring needs to be replaced.

Cloth insulated wires may not be grounded properly and are definitely unsafe by today’s standards. The cloth actually falls off, leaving exposed wires in vulnerable areas of your home. If a home’s wiring is aluminum, the wiring shrinks and expands at contact points, causing a potential fire hazard. Neither method is safe. If you think your home may contain either of these types of wiring, The Electric Connection specializes in wiring upgrades for older homes.

The knob and tube wiring that electricians in Los Angeles used before the 1940s employs the use of ceramic knobs and tubing, with wires running through the tubes. It is not a grounded system, so plugging in any modern appliances or electronics is an immediate fire hazard. There are a number of insurance companies that will not offer fire insurance to homes with this type of system. An electrician in Los Angeles from The Electric Connection can upgrade knob and tube for you also.

Homeowners hear the words “electrical upgrade” and immediately start to see dollar signs. With the Electric Connection, the prices are affordable and the work that is recommended is an investment, not an expense. Older wiring systems are not only unsafe; they’re raising the cost of your electricity. More modern systems were developed with efficiency in mind. When a home is upgraded from knob and tube wiring or aluminum wiring, the electric bill immediately goes down, as does the insurance bill and the home repair budget – no more calling a Los Angeles electrician once a month for blown fuses or shorts.

The Electric Connection is the electrician Los Angeles CA homeowners contact most often for electrical upgrades. With over thirty years experience and twenty-five full time employees, all residential and commercial electrical services needs are handled quickly, efficiently, and affordably. Whether it’s a rewiring, an installation, or new construction, the professionals at the Electric Connection can handle it in a timely fashion. If you’re an LA homeowner, your family and your wallet will be happy that you did.

Click here to read more.

When you are ready to mow the lawn, you may have to pull your mower’s starter a few times before it turns over. In the event of a power outage, of course, you really don’t want to put up with such issues with your generator. Typically, whole-house generators will activate automatically when the power goes out, regulated by an automatic transfer switch. If yours is thus equipped, but doesn’t come on when needed, you are in need of repairs. If you’ve had them done before, though, and are still struggling with this issue, a generator replacement is worth considering.

Your whole-house generator burns fuel in order to power your home in the event of a power outage. If it is burning through more and more fuel during its operation, though, running your generator may simply cost more than it is worth to keep your electricity flowing when the power goes out. Replacing your system with a more efficient model may be advisable.

You need to test your generator and have it inspected regularly to ensure that it will be there for you when you need it most. If problems keep popping up upon such inspections and tests, it may no longer be cost effective to continue repairing your existing system. A replacement generator could offer you greater reliability as well as reduced repair costs.

Electrical fires can be extremely destructive and uncontainable, once they break out. An electrical fault and severe sparking in the electrical installations in one part of your property can easily spread to the other areas very quickly. This means the destruction caused can be extremely high and the fire can pose a threat to the people living or working on your property as well.

When you get the electrical system on your property installed by credible professionals, you can rest assured that there will be no problems and that they will be quite safe. However, if you live on an older property that also has old wiring, it can deteriorate or get damaged over time, and can prove to be extremely dangerous. This is why you should make it a point to conduct routine checks on all the electrical installations in your home.

Most electrical companies also design preventive electrical maintenance contracts based on your specific needs; they will visit your property at pre-decided intervals and conduct thorough checks on all the electrical fittings and installations. This helps identify potential & existing problems beforehand and these can be fixed before they pose a major hazard.

Aside from this, it’s also important that you be wary and conduct some basic checks on all the electrical installations. Here are some signs you should look out for:

If you find that a particular circuit breaker trips once in a while, it may just be an indication that you have plugged in too many electrical appliances and devices all at once into that particular circuit. However, if you find yourself resetting the circuit breaker too often, it’s crucial that you don’t ignore it.

The circuit breaker is built specifically to alert you when something is wrong with the system; this is why you should call in a skilled electrician and get it checked without delay. The constant tripping could be an indication of a much bigger problem.

If you hear buzzing sounds or notice sparking in an electrical outlet or if you detect a burning odour emanating from the outlets, that’s a very strong warning that something’s wrong with it, and that it needs to be replaced as soon as possible. Not only will the electrician check the outlet, but will also check and update the wiring connected to it.

If you experience an electrical shock while operating any appliance or device in your home, it’s an indication that there is electrical current leaking at some point. This could be caused by faulty wiring or even a grounding fault. The electrician will use special testing devices to see where the problem lies and will fix it quickly and efficiently.

Sometimes a light bulb might flicker because it hasn’t been fitted correctly in its socket. However, there are times when this problem is caused due to a loose circuit or loose wiring. It’s the same with other electrical outlets that don’t function as they should.