With all of the information circulating around about renewable energy sources, it can be hard to keep everything straight. One of the most common sources of renewable energy actually comes from the sun, and is harvested with solar panels. The most common solar panel converts raw sunlight into electricity through the use of photovoltaic cells. These solar panels can be found in fields dedicated to their use. One of the most attractive things about solar panels, however, is that they can be installed directly onto your home by an electrician in Pasadena CA. This is becoming more and more common, as people are looking for ways to be more environmentally friendly, self-sustainable and reduce their monthly electric bills.

Installing and Using Solar Panels

There are two different ways to connect solar panels to your home. You can either connect them to a battery array that will store the power for you, or hook them directly into the existing electrical grid. Both methods have their pros and cons, which you can discuss with an electrician Pasadena, such as The Electric Connection.

One of the great things about having your own energy storage array is that you have reserve power if there is an outage. An electrician Pasadena CA who specializes in solar panel upgrades will place a panel in the optimal position on their home. They will then connect the panel to a voltage controller, which helps to control the flow of electricity into the batteries. The battery array is then plugged into a power inverter that converts the electricity from DC current to AC current, so that it can be used in your home. This type of installation is typically used to power just a handful of essential appliances, lights etc. In the case of a power outage, you will have a few hours of electricity by smartly using the battery array to power your home lighting, and essential electrical circuits.

The method of installation that is the easiest for the end user to understand and use is by hooking the solar panel directly into the main power grid. The Electric Connection, or the electrician in Pasadena that you have assisting you with your installation can actually connect your solar panel up so that it will feed the electricity back to the utilities company, rather than just to your home. This can work in one of two ways. Either you send everything you generate back to the electrical company, or you send anything in excess of what your battery array can handle back to the electric company. In either case, you receive credit for the energy you send, which can in turn lower your electric bills dramatically. This installation is slightly more involved, but only requires a minimal amount of home rewiring and/or electrical panel upgrade.

Regardless of the type of installation that you choose, adding a solar panel to your home is a great investment. Not only will you benefit from the peace of mind that you are using fewer fossil fuels to power your home, but you can even receive credit back for any excess energy that you create. To sweeten the deal, there are many state and national grants and tax credits that have been designed to assist people investing in renewable energy sources. Because of these tax credits, much of the cost of installation will come back to you on your tax returns. In just a few years, the majority of all solar panel installations will pay for themselves. If you are truly looking to increase your energy independence, and are interested in renewable energy sources, contact your Pasadena electrician today to talk about solar power.

Click here to read more.

Your home’s circuit breaker is a valuable line of defense in protecting your home. All your electrical appliances rely on your home’s circuit breaker which makes it that much more important. Replacing your circuit breaker can be such an economical investment in protecting your home. Dealing with flickering lights, poor performance from your appliances such as your stove or microwave, and a smoking scent from your panel are just a few of the warning signs when it comes to your circuit breaker. Learn more about the warning signs so you can avoid a catastrophe and replace your circuit breaker before it’s too late.

One way to tell if you need a circuit breaker replacement is to sniff around and see if you smell a burning odor coming from the panel. If so, that means the wires and insulation have become overheated. Ultimately your circuit breaker is failing to protect your home from an electrical short elsewhere. Shut off the main power to the house immediately and call an electrician for an home, potential buyers are going to be hesitant to put down an offer. Everyone wants to purchase a home that is safe and secure, which is why an upgraded breaker is that much more valuable.

Let’s say your teen is using an electric drill outside and standing with bare feet in a puddle. Not a good idea. Let’s say the drill malfunctions and leaks electricity out of its proper circuitry. Electricity takes the path of least resistance, which just might be from the drill, along arms and legs, and into the puddle. If the drill were plugged into an ordinary outlet, this could be a fatal accident.

In recent years, the National Electric Code has included requirements for special safety outlets where such accidents could happen. These special outlets are called “GFIs” (Ground Fault Interrupters) or “GFCIs” (Ground Fault Circuit Interrupters) — two different names for the same thing. They are required by the National Electric Code in garages, kitchens, bathrooms, pools, spas, and in some other outdoor areas where water could be present. The Electric Connection, your local Glendale electrician, can check all of your outlets for you and replace or install new GFCI’s.

A GFI, or safety outlet, detects that the current in an appliance is no longer flowing in its proper circuit. It shuts off the current within milliseconds. In the case of our teen, if the drill were plugged into a safety outlet, electrocution would be avoided — a life saved.

GFIs look different from ordinary outlets. They have two buttons labeled “Test” and “Reset.” You can check that the outlet will cut off current when needed for safety by pressing “Test.” Test should shut off current to the outlet so that the outlet no longer provides power. After the test, you can restore current to the outlet by pressing “Reset.”

Newer GFIs also have a tiny green indicator light that tells you that it’s providing power. This is a handy feature when you conduct your test. It’s also handy because from time to time, safety outlets may be triggered without your knowledge and may no longer be providing power. The absence of the green light will alert you to this situation.

A Downside

This is the downside of safety outlets — they can be tripped without your realizing, or they can become faulty and can trip repeatedly for no reason. Let’s say you have an electric toothbrush charger plugged into a safety outlet in your bathroom. The outlet has somehow been tripped and no longer provides power. If it’s equipped with a green indicator light, the light will be off. In any case, if it’s lost power, press “Reset” and power should be restored.

Another possibility is that an outlet in a kitchen, bathroom, garage, or outdoor area is not a safety outlet but is “protected” by a GFI elsewhere in the circuitry. If a non-safety outlet in your house has lost power, you can check for this situation by making sure that all the GFIs in your kitchens, bathrooms, and other areas have not been tripped and are still providing power.

Home Safety Check

Check that your kitchens, bathrooms, garage, and outdoor areas are equipped with working GFIs. (Refrigerators are incompatible with safety outlets and should not be plugged into one nor protected by safety outlets elsewhere in the circuitry.) If you have GFIs, remember that they have a limited lifespan, so press the Test button of each at least once a month to check that they shut off power as designed.

If your home doesn’t have safety outlets or they are no longer working, call a qualified electrician to get an estimate for installation. GFIs are a relatively inexpensive investment in your family’s safety.

Click here to read more.

Are you thinking about redesigning your home? When you look at the 2012 top home trends, you will realize that you’re not alone. This year everyone seems to be jumping on the home renovation and remodel bandwagon. While some 2012 top home trends involve pure aesthetic components, this year’s trends are all about accessibility, functionality, and efficiency. From home renovation to home color trends, this year has something for everyone.

Take a look at this year’s home trends to choose which ones fit in with your plans for home renovation.