We get a lot of calls for fluorescent light repair here at Expert Electric. But before calling, always remember that if your fluorescent light fixture is burnt out or flickering, first change the bulbs (fluorescent tubes) to see if this corrects the problem and also save yourself some money. If you are not comfortable changing the bulbs due to location or any other safety concern, we would be very happy to help you. If your fluorescent fixture still does not light up after changing the bulbs then the problem is most likely faulty ballast, or less commonly a possible wiring issue.

Fluorescent light is the product of two components: the lamp and the ballast. The role of the ballast is to boost voltage for short duration; the ballast will then maintain a constant applied limited current to properly operate the lamp. You must use the proper ballast for each type of fluorescent bulb. Bulb types are T12, T8, and HO. While it is tempting to install higher efficiency fluorescent lamps (like T12s or T8s), we must pay special attention to the type of ballast installed in the light fixture or those bulbs will not operate properly.

The ballast technology has improved a lot in the last 15 years.  If you are not upgrading your ballast you won’t see the potential energy savings that efficient fluorescent lighting can provide. The new electronic ballasts operate differently from older electro-magnetic ballasts. They don’t just save you money but out-perform magnetic technology in several ways.

Higher Efficiency: New electronic ballasts provide you with more light and cost less to operate, saving you money and helping the environment. Dimming is also easier with electronic ballasts.

More Control: Electronic ballasts can be manufactured to under drive or overdrive the lamps they support, producing more or less light. This allows you to adjust which areas need more light and which need less light. The lighting pattern can now be changed due to work patterns and specific lighting requirements.

Dimmer Switches: Dimming is also easier with electronic ballasts. Preset your dimmer and it can cut your light by 50% and this will save you money as well.

Less Heat Emission: Electronic solid-state ballasts produce less heat than electromagnetic type ballast. What this means is if you are operating cooling equipment, such as food coolers or air conditioning during summer the electronic ballasts will help you save on cooling costs.

The best part is that with the higher frequency electronic ballasts, there is no flicker or buzz. There are many benefits to high efficient ballasts and we recommend you take advantage of them.

If you have been thinking about getting a specific job done around your house, but have always hesitated because you don’t know how much it costs, we can help. As with any job you need to hire somebody else to complete, you want to have an idea of what it is going to cost. So how do you get an electrical estimate from an electrician? Glendale homeowners can call The Electric Connection and talk with a member of our team. Although it is virtually impossible to give an exact quote, especially over the phone, it is possible to give a pretty good estimate if you know exactly what it is you need like a fixture installed or an outlet replaced.

If you need an estimate about a problem you are having in the house, but are not entirely sure what that particular problem is, things change a bit. An electrician will need to do some testing and diagnosing before an estimate can be given. The time it takes to do this can vary depending on the situation. However, the electrician should give you the fee for hourly rates and explain material costs. Although it is impossible to give exact estimates, an electrician can certainly give you an idea of the problem once found and the cost to fix it.

If you know you need a bigger job, like an electrical panel upgrade, this is something you will want to get an estimate for beforehand. This protects you from getting an astronomical bill after a job is completed that catches you off guard. Always talk with the electrician. Glendale residents will want to make sure they are only hiring a certified, competent electrician to complete any electrical jobs. The Electric Connection has licensed and bonded electricians and would love to help you get your next electrical job completed. Give us a call today.

Mr. Electric® wants to make sure everyone is ready for the fall and winter months in case any weather-related disasters occur.  The importance of having alternate reliable energy when the need arises cannot be stressed enough. Electricity is the lifeline of many local businesses, hospitals and city buildings, and the amount of electricity usage in households is often taken for granted.

Generators propose a great solution when temporary power is needed, but they also require special care and attention to detail for safe operation and maintenance. Follow these tips to stay safe while operating permanently placed and portable generators.

Always operate generators outside in well-ventilated areas and away from windows, doors and vents. Enclosed or partially enclosed areas, even with ventilation, can result in CO poisoning.

“One generator produces as much CO as hundreds of cars. CO from a generator is deadly and can incapacitate and kill you within minutes.”

- Consumer Product Safety Commission

Plugging the generator into a wall outlet, also known as backfeeding, can pose an electrocution risk to utility workers as well as other homeowners and businesses served by the same utility transformer.

Mr. Electric licensed service professionals will be able to install a transfer switch, which will prevent a back feed in electrical current.

Before refueling, always turn off the generator and allow time for it to cool off before refueling. Continuous operation heats up the generator and any fuel spilled on hot engine parts could ignite.

Store fuel away from any fuel-burning appliance and outside of living areas in properly labeled, non-glass containers.

Always make sure the generator is kept dry during use, and dry your hands before touching it. Operate the generator under an open, canopy-like structure.

Never use the generator in wet or rainy weather or manipulate the electrical components if you are in standing water. Correctly storing and maintaining generators will prolong the life of the unit.

Being aware of the inherent hazards of electric generators will help prevent harmful situations. These tips from Mr. Electric will keep homeowners safe while operating permanently placed and portable generators.

Now that you have the holes for lamp sockets, we need to start wiring the lamp sockets.

Kevy, an eCommerce Marketing Automation ​company that specializes in automating and personalizing the shopping experience. ​ ​​Kevy gives online retailers the tools they need to help visitors find the products they care about most. When she is not at Kevy, Brooke and her husband Ryan love creating new projects and are always looking for a new DIY opportunity around the house.

• True to form

• Tailored and elegant

• Clean lines and natural hues

• NEW and Exciting!

A burst of crystal, metallic ribbons, streamers and champagne glasses, if this contemporary winner from Corbett Lighting does not set the scene for a good time, you need to find a new playgroup!  Finished in Modern Silver, “Party All Night” from Corbett Lighting is cutting-edge contemporary with the fun and flair of whimsical style.

“Aleeka” from Kichler Lighting is a swirling mix of concentric circles and shaded orbs.  A fascination of motion with a Classic Pewter finish simply and elegantly defines modern-contemporary style.

“Starfire” from Maxim Lighting takes xenon illumination to the next level. Polished Chrome and Beveled Crystal deliver a sparkling exuberance that is exciting and unique.

“Barclay” from Savoy House exudes strength and an edgy, trend-setting style.  The Gilded Bronze finish, mesh drum shade and cascades of  handcrafted chain brilliantly integrate Mediterranean and industrial characteristics.

“Jennings” from Crystorama showcases classic contemporary in an intricately designed metallic shade.  The Polished Nickel geometric cutout is attractively illuminated around the crisp linen drum shade.

“Pearla” from Eurofase combines LED light sources, a polycarbonate diffuser and a hand-polished chrome finish.  Like a strand of fine pearls,  this contemporary whirl of illumination is substantial and opulent.

“Travis” from Hudson Valley presents an ultra glamorous sophistication reminiscent of the “Golden Age” of cinema and Hollywood Regency style.  Sleek and elegant, prisms of cut glass encase candle holders for a fascinating play of illumination.

“Quill” from Hubbardton Forge is a marvel of rectilinear and planar geometry with branching structures and feather-like plumes in a Vintage Platinum finish.  LEDs and infinitely adjustable horizontal or vertical cable offer a fantastic array of hanging options and lighting effects.

“Corfo” from Eurofase offers a playful visual symposium like a crystalline rainfall embedded in Chrome coils.  Decorative light sources emanate a dazzling illumination within this powerful lighting design.

“Flagship” from Access Lighting makes a show-stopping presentation.  Metal panels, robust peripheral light sources and a powerful downlight offer ideal illumination, handsomely designed with timeless, contemporary grandeur.

The Dallas Market

Professional lighting consultants from Capitol Lighting have meticulously reviewed hundreds of showrooms filled with the latest LED innovations, as well as contemporary dining room fixtures, portable lamps, outdoor lights, ceiling fans and chandeliers from elite lighting manufacturers around the world, including top vendors in the US, Europe and Asia.