Have you ever received a nasty shock when your electric bill arrived? Maybe the amount you owed skyrocketed when you turned on the air conditioning for the summer, or the refrigerator started breaking down and consumed an excess of electricity. No matter what the cause of your sky-high electric bill, once you use the electricity, you have to pay for it. One way you can get a heads-up on any unusually high consumption is to keep an eye on your electric meter. Read on to learn how to read the meter so you are prepared when the bill shows up at your door.

Is Your Meter Digital or Dialed?

If you're lucky, you have a newer electric meter with a digital display, making it a cinch to see how much current is coming in. Simply compare your consumption from one month to another and you'll quickly be able to figure out if you're using up more energy than normal.

Traditional electric meters are a bit trickier to read, but you don't have to be an electrician to decipher them. These older meters have dials instead of a digital display, and they don't all spin in the same direction. With a little practice, however, you can figure out how much power you are using and get a ballpark idea about what the bill will be.

Spinning Clockwise, Spinning Counterclockwise

On a traditional electric meter, there are five dials that go between 0 and 9. To read the meter, follow these steps:

There's one more twist -- if the dial is pointing exactly to a number, and the next dial to the right points to a nine, you should subtract one from the dial that points to the exact number.

Now you've got your reading, and you can simply track how much it changes from month to month to get a handle on your energy use.

Getting Smart About Your Meter

If your utility has already implemented smart electric meters, it's even easier to follow your consumption. Not only is the display in easy-to-read digital form, but the meter can provide updates on how much you're using as often as every fifteen minutes. That way, you can get an alert in real-time if your usage spikes so you can track down the culprit before you have to shell out a fortune in bills.

In addition to monitoring your own consumption, it's a good idea to watch the meter so you will know if the utility company accidentally overcharges you. If you need any help figuring out how to read your meter, contact a trusted electrician today.

relatively high ceilings. Drive by any industrial park, warehouse, or factory, and walk inside and what you will see is a high bay light.

But walk into any factory or warehouse and you will see different styles and options, wattage’s and configurations. Traditional high bay fixtures that were once common place were Mercury Vapor, which were then replaced with High Pressure Sodium and Metal Halide bulbs. As new technologies were introduced, and old technologies became more common, the old HID bulbs were replaced with Induction and Fluorescent light sources. And more recently with the more wide spread approval and popularity of LED, we started to see conversions from these older technologies to the latest energy saving LED High Bays.

A High Bay Fixture, depending on the light source, can take on many forms and shapes. If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. These bulbs typically come in two wattage’s, 400 and 1000. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. Fluorescent can dim, but you need special ballasts for them. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away.

There are times when you simply can’t or shouldn’t do certain repairs around your house. Not everybody is trained or cut out to take care of all the little jobs that arise. You need to hire a professional from time to time. One of the professionals you will likely need on occasion is a Glendale electrician. If you have never used an electrician or have had a bad experience in the past and are looking for a new one, how do you know what to look for? The team at The Electric Connection has been helping folks out for years and is here to help you as well. The following characteristics are what you should look for when you need to hire an electrician to take care of work around your home.

• Good reputation-ask your friends, neighbors and family members if they have used a particular company. What was their experience? Do some checking online as well. Angie’s List is a great place to start.

• Professional-an electrician that shows up at your door should look and act professional. A clean uniform is a good sign of a professional contractor. If you are bringing an electrician into your business, a professional appearance is very important.

• Licensed and bonded-this is an absolute must when hiring an electrician. Glendale residents should only allow contractors into their homes or businesses who have the proper licensing through the state as well as a bond to protect you in case there is any damage done to your home.

• Timely-Cable companies are often joked about because of their lack of timeliness, but it isn’t a laughing matter. You are busy and don’t have hours to sit around waiting for an electrician to show up. You need a company that can give you a set window and stick to it.

If you need an electrician, you can call The Electric Connection and find an electrician who meets all of these standards.