Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

This Valentine’s day, show your partner how deep your love runs for him or her by cleaning all the neglected kitchen appliances! Chocolates, flowers, and jewelry are nice too, don’t get us wrong. It’s just that serious cleaning says a lot about how much a person cares. By tackling these uncharted territories, not only will the love your partner has for you grow, you may even rekindle the love you once had for your home. That’s a whole lot of love going around.

Can you remember the last time you cleaned the inside of your refrigerator or behind it? It isn’t the easy appliance to maneuver around, so it’s likely that you haven’t cleaned behind it since you moved in. To clean your refrigerator, first pull it out so that you can mop up the dirt, debris, and gunk that’s been left behind. Then, vacuum the coils, which are located either behind or beneath your refrigerator.

All refrigerators are equipped with door gaskets to prevent cold air from escaping. If you have loose gaskets, read through your owner’s manual to find out the replacement part numbers. Your local hardware store should have gaskets in stock.

Make the outside of your fridge sparkle with a solution of equal parts water and white vinegar. If you have a stainless steel fridge, rub in the direction using either a paper towel or a soft wash cloth.

Now that the outside of your fridge looks brand new, it’s time to tackle the other not-so fun part, which is the inside. Clean all shelves and crispers. Perhaps you can use this time to throw away all your expired foods and beverages that you forgot existed.

Even if you have the luxury of owning a self-cleaning oven, some work is still required on your part. Using a solution of equal parts water and vinegar, wipe down the door hinges and frames. You can tackle the particularly rough spots with a some baking soda and a sponge.

How to Clean Your Stovetop:

Soak your burners with hot, soapy water for a few hours, and then scrub. The drop plate may be the dirtiest component of your stove. Before your scrub this area, use a vacuum to get out all the accumulated gunk.

To loosen up all the baked-on foods in your microwave, fill a microwave-safe container with water and heat it until it boils. Wait a few minutes before opening the door so that the steam can do its job; then wipe.

We know how counter-intuitive this sounds, but trust us – it’s a task that needs to be done! Your dishwasher works day in and day out to clean your dishes; it’s only a matter of time before all the gunk accumulates.

If your planning to cook dinner for your partner this Valentine’s Day, he or she will notice how sparkling-clean the plates are!

LED pole lights provide an opportunity for businesses, industrial buildings, and other larger outdoor venues to have access to a high-quality source of light that’s energy efficient. Pole lights are the most common option for outdoor lighting of parking lots, walkways, neighborhoods, and building grounds. That is because this type of fixture creates a large amount of illumination through a beam, which the user can direct in a specific area. Before buying LED pole lights, buyers need to consider a few key factors.

Commercial, residential, or industrial uses are acceptable options for LED pole lights, depending on the specific model selected.

Key considerations when making this purchase include the following:

Comparing all of your options is important. Finding the right balance isn’t just about costs but quality of the product and long-term options.

When it comes to electrical tasks in yousitur home, it’s never a good idea to turn them into a DIY project. Electricity is a very necessary and useful utility, but can be extremely dangerous too and it’s crucial that you call in a certified, skilled and insured electrician to handle the job for you. Look for a professional and reputed company that provides 24/7 services and keep their number easily accessible at all times; this will ensure you get prompt services exactly when you need them. Here we discuss in which situations you should call in an emergency electrician to tackle the job for you:

This is extremely dangerous and you should immediately turn-off the circuit breaker that you feel is connected to that wire. Do not try to repair this yourself as there could be a chance that the circuit breaker you turned off isn’t connected to that particular room wire at all and this exposes you to the risk of electrocution.

This is a situation you shouldn’t take lightly at all. It’s important that you keep all your family members and pets away from that room and switch off the circuit breaker you think is connected to that wiring line. If you have any water pooling, puddling or accumulated (as in a flood situation), call in a skilled electrician to check all the wiring and address the problem without delay, as this is a major electrocution risk.

It’s not often that a home will lose power completely, while there is no similar problem in the neighbourhood. However, if the power does go out only in your home, quickly check with your neighbours and check whether the street lights have also lost power. If everything seems to be alright there, you may have a major electrical problem on your hands.

In all these situations, do not try to find out what the problem is; call in a licensed, local electrician to inspect the wiring and other electrical fittings and fix the problem. The point we are trying to make here is that if you in any way feel that an electrical installation or appliance is unsafe, call in an electrician without delay.

The one way to reduce the chances of an electrical problem from occurring is to get regular electrical maintenance done. The company you hire for the job will send out skilled professionals at pre-decided schedules to conduct a thorough check on the wiring. In case any potential problems are noticed, you will be informed about them and they will be addressed without delay. This reduces the chances of major electrical problems surfacing out of the blue.

We at Allround Electricals will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.