Most electrical problems in your house will more often than not require an electrician to fix them, but sometimes, if you have some time on your hands and the right tools, there are certain things you may want to tackle yourself. In this post, we will look at replacing a junction box and fixing backstabbed wires.

Replacing a Junction Box Cover

Your existing junction box should already meet the required National Electrical codes of standards, but if you happen to find one in your home that is missing a cover, it is best to have it replaced immediately. Because the splices where wires are connected together are housed in a junction box, they could end up being inadvertently damaged and become a fire or shock hazard. If this has already happened, you may want to ask a qualified electrician for help.

Fixing this is as simple as using the original cover and some screws, or if it is lost or damaged, buying a new one for a few cents at your local hardware store and installing it with the accompanying screws.

Backstabbed Wires

Backstabbed wires occur when wires in newer switches and receptacles are pushed into the back. These are more likely to come loose than those that are held in place by screws. A wire that comes loose will most likely cause the terminal to stop working, but in some cases, it may even cause an electrical fire.

Carry out a check to see whether there are any switches with backstabbed wires. If you find any, release the wires and then attach them to the appropriate screw terminals on the switch. If you do not feel comfortable doing this yourself, your electrician should be able fix this for you pretty quickly.

Circuit breaker tripping might be something of an annoyance, especially when it happens at inconvenient times. Still, it is much better to have a circuit breaker that trips as opposed to one that doesn’t cut the power when it should.

Circuits can safely handle a certain amount of electricity, but we often don’t realize just how much of a load we’re putting on them. All too often we find ourselves plugging in one appliance too many, only to end up in the dark as the circuit trips! No one enjoys being in the dark, but your circuit breaker is doing the very important job of helping ensure the safety of everyone in your home. It’s important to understand what a breaker does and why it’s so crucial. It’s also vital to have an understanding of what it means when they keep tripping.

If your wires have more current flowing through them than they can safely handle, they could potentially overheat. This can lead to a few different outcomes. The wires could malfunction and lose their ability to work. This means repairs would be necessary before you’re able to utilize that particular circuit again.

Another possible result of excessive electricity is the melting of the protective insulation around the wiring, which leads to exposed metal wires. This exposure can cause fires, as well as an increased risk of electrocution. The circuit breaker should recognize when there is too much current present in the wiring. When the breaker detects excess electricity, it trips, cutting off power before the extra current can lead to any safety issues.