One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

The best Allen electrician can tell you that chances are, your air conditioning unit is probably going to be the most frequently used electrical appliance in your home this summer.  Making sure that the a/c unit is running efficiently and safely is the best way to save money and prevent costly and dangerous electrical problems. Still, as the best Allen electrician will also tell you, preventing electrical issues can be difficult for someone who doesn’t recognize electrical problems immediately. After all, most of us who are not professionals probably don’t.

Surprise! It’s NOT Your Unit

As the temperatures rise this summer, keeping up with the maintenance of your air conditioning unit is one of the most important things you should do. However, when customers hear about maintaining their a/c unit, they often think in terms of Freon and condensers. The truth is that, although those are clearly important, one aspect that is often overlooked is the electrical part.

It may surprise you to know that calling an air conditioning guy when your unit is on the fritz isn’t always the right thing to do. In fact, any Allen electrician will confirm that, indeed, half the time the problems aren’t with the a/c unit but with the electrical system. If the problems are electrical, they can result in dangerous blowouts and burnouts that could cost you a fortune—or even your home, if a fire were to start. So, with so many things that could go wrong, how can you be sure that the problem calls for an Allen electrician and not an air conditioning repairman?

Air Conditioning Electrical Safety Tips

For instance, did you know that a lot of electrical problems arise when swapping air conditioning units? Something as deceptively simple as trading your current unit for another one, especially if the new unit is larger, can wreak havoc on your electrical system. The amount of wattage required to power the new unit can result in overloading, overheating and damage to the unit as well as to your home’s electrical system. You can burn the lines quickly. Some who think that they have found the solution in splicing their lines to accommodate a newer unit may also be in for a dangerous wake-up call. Splicing lines is never a good idea. When in doubt, call your local electrician. He understands what should be done.

Another thing that your electrician understands that you may not be aware of is that you need him to come out and inspect your circuit breakers regularly to make sure that no wires are melting, no circuits are going bad, and there are no potential fire hazards looming. Because a/c units consume so much power, many times they are wired directly into a circuit breaker. Loose connections in the circuit breaker can cause many problems, including irreparable damage to the electrical system. Be sure to always have an electrician come check your breaker and wiring to be on the safe side.

The electrical work is not limited to the obvious parts of the unit that may need help. The Forced Air Unit (FAU) part of your air conditioning unit is one of the most prone to electrical failures, and yet it is the one part that is often overlooked because it’s located somewhere in a closet, a spare room, or a utility space inside the home. The blower fan inside the FAU often blows out, causing issues with the overall functioning of the unit. Here’s the best way to prevent this: Make sure your electrician does routine maintenance on every part of your air conditioning unit, including the FAU, to prevent blowouts.

Electric Man: Best Allen Electrician

The best Allen electrician makes no bones about the importance of checking your electrical systems when turning on your air conditioning for the sizzling Texas summer, and how much you can save on your summer electricity bill, repair costs and a/c maintenance and repair. As summer heats up, let the team at Electric Man take a look at your unit and help you save money, time and repairs. For more helpful tips, read ElectricMan’s blog or connect with us on any of our social communities. If you have any questions, feel free to call us at 972-792-7270, or use the Contact form on our website!

While it’s true that there are many different ways that electrical issues affect your home and belongings, there are four basic electrical problems that DC homeowners face on a regular basis. Each of these electrical problems must be addressed in a timely manner—otherwise a dangerous situation may occur, including electrical fire and shock. Fortunately, most of these are very easy to address, diagnose, and correct, as long as they are looked into quickly by a DC Electrician.

Homeowners throughout the DC area should immediately contact us if they observe any of these common electrical problems:

Whenever there is a sudden increase or change in electrical current, it is referred to as a power surge. This can force circuits to overload, leading to lost power and additional damage. There isn’t much you can really do—your best bet is to prevent a surge from happening by using surge protection strips and having a DC electrician install a whole-house surge suppression system. Whole-house surge protection is the best first line of protection you can have to protect your home electronics and wiring from the damage caused by lightning strikes. The cost of replacing electronic equipment in an average home is $8,000, and it may be even higher for homes in DC. Whole-house surge protection in conjunction with power strip surge protection is affordable insurance against electrical surges caused by lightning strikes and other disruptions. Contact Kolb Electric for whole-house surge protection installation in DC.

If you plug too many items into a single unit, it can cause the circuit to become overloaded. While you may be tempted to use more power strips to plug in more items, this can actually cause dangerous overloading and overheating. Whenever your circuit breaker trips frequently, you should let a qualified electrician take a look.

Whenever DC homeowners try to run their own electrical wiring, it often results in what is known as redundant wiring. Homeowners should not attempt any do-it-yourself home wiring—it is very dangerous because the wiring may not be properly capped and terminated.

Whenever you have issues with intermittent power, it usually is a warning sign that serious wiring issues are present. This is often caused by loose or improperly fastened wiring, which requires the immediate attention of an expert electrician.

These are common electrical problems DC electricians are often called in to correct. If you observe any of these problems in your home, we recommend you contact us. We are a family owned and operated business that has been serving the DC area since 1925. You can count on our electricians to provide upfront pricing and high-quality service.

Taking on a Thanksgiving get-together is no easy task, and if you’re going to do it, you might as well make it something guests will remember. Fortunately, making it memorable doesn’t have to be complicated. We have some simple LED lighting ideas that will help you dress up your home for the holidays.