Properly lighting a space or environment takes a little know-how. An important part of what will help make an educated decision is understanding correlated color temperature (CCT) and how it relates to the shade of white light that you will experience. Understanding CCT can help greatly with setting the tone or feel of a room.

Correlated color temperature (CCT) will tell you what hue and tone of white to expect from a specific bulb or fixture. CCT is measured in Kelvin (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K-20000K).

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Saving energy is a laudable goal. By using less electricity and other energy around your home, you reduce your contribution to environmental degradation and climate change. On the other hand, easy and reliable access to electricity is in large part responsible for the high standard of living that most Americans enjoy. Read on to learn more about the intersection between comfort and energy consumption, and how you can cut back while still participating in modern 21st century life.

Energy Consumption and GDP Go Hand-in-Hand

When it comes to residential households, cheap power allows us to run the electrical work that lends so much convenience and comfort to our day-to-day lives – refrigerators, air conditioners, lights, computers, televisions and much more. On a societal scale, access to fossil fuels and the energy potential stored within is what has made possible so many technological and logistical advances in the first place. However, as the years advance, the science is becoming ever more clear – excessive carbon emissions are causing the planet's climate to change, often in destructive and unpredictable ways.

Of course, no one wants to go back to the days of pushing a plow behind a donkey and churning butter by hand, either. The big question, and one that may become existential, is whether we can decouple our energy consumption from our standard of living. Historically, consumption and GDP have risen together in lock-step. Can the United States and other developed countries figure out how to break the chain?

Decouple Lifestyle from Consumption

A recent report by the Energy Collective tells us that “reductions in energy intensity is arguably our most important tool to achieve a sustainable energy future.” What does it mean? That we can get the same or more production out of less energy usage. In some ways, we've already made progress – between 2007 and 2013, energy consumption dropped 4.5 percent in the United States, while the Net Domestic Product continued to rise.

That's all well and good for the country, but what about your household? The same principles apply – for a more sustainable future, look for ways to get the same results with less energy use. That means switching to efficient appliances, like Energy Star certified equipment. It means replacing old incandescent light bulbs with modern LED models. And look for little changes that can make a big difference, like adjusting your thermostat a few notches up or down to reduce the load on your HVAC equipment.

Make a Difference in Your House

You can do your part to cut down on your energy use while still enjoying the amenities of modern life by making targeted efficiency investments and simple behavioral changes. If you need tips on how to reduce your energy bills without reverting to stone age-style living, or need any other electrical work, contact a reputable electrician today.