In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to handle this job in an expert manner. We can install and maintain all type of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

Electricity is like a kitchen knife. If you use it wisely, it can cut food and prepare delicacies. If you use it unwisely, it can end up cutting your finger. Electricity flows through anything that is a “conductor.” Interestingly, humans are very good conductors of electricity!

Since electricity is a form of energy, a strong current has the ability to seriously harm you. If the current is strong enough, you can be fatally injured. Due to the strong possibility of a fatal injury occurring, electric cables are insulated. Another important reason why they are insulated is to prevent energy from dissipating into the surroundings, allowing it to be conserved.

Cappuccino Doughnuts courtesy of Ann Stratton from CountryLiving.com

Find your angle. 

Playing with the direction and angle of your light source is essential. With the right play between light and shadow, you can accent the most titillating parts of your dish, while camouflaging any flaws. Texture greatly contributes to the delicious appearance of most any meal. Notice how the angle of the light below highlights the different textures within this broiled flank-steak sandwich.

Household appliances are expensive investments, so it's an alarming moment when the hot water heater sputters to a stop or the washing machine starts spewing suds all over the laundry room. If you're lucky, the problem is something that can be inexpensively repaired. However, sometimes your appliance is telling you it's time for a brand-new model. In fact, depending on how old your current model is, you could actually save money and come out ahead by purchasing a new, energy-efficient unit. How do you know when it's time to call the repairman, or time to pull the plug? Carefully consider your options when a machine is on the fritz: 

Do It Yourself

The first step is to read your repair manual and search online for people who have had similar problems. It could be that the issue is something simple that you can fix yourself. Things like clogged drains or filters should be an easy repair. 

Are You Under Warranty?

Lucky you. If your appliance is still under warranty, you may be eligible for free parts, a free repair or even a whole new unit, depending on the terms of your contract. Make sure to save all the paperwork when you make a major purchase, and read it over carefully before putting out any money for a repair. 

Call a Professional

If your appliance is only a few years old, it's probably worth the money to have a reliable professional come look at it and give you an estimate on what a repair should cost. Fixes like installing new motors or belts probably won't break the bank. If it's less than half the price of buying a new machine, it's probably worth it to fix instead of buy. Ask how many more years you can expect the appliance to last after a repair.

Time to Go Shopping

If your appliance is more than 6 or 7 years old, or if it's broken down numerous times in the past, it's time to start looking for a new model. If you are still coaxing an ancient, decades-old device into health, you might be shocked at how much you can save with an upgrade.

If you decide it's time to buy a new unit, do your research before you buy. The federal Energy Star program maintains a directory of products that meet strict efficiency guidelines, so you can be sure that whatever you buy will help tamp down your utility bills. Do some math to figure out how long your expected energy savings will take to cover the cost of the appliance. Also, don't forget to factor in any delivery or installation charges, plus the removal bill for the old unit.

Take Care of Your Appliances 

Finally, don't forget to read and follow all manufacturer instructions and keep up with any routine maintenance for your household appliances to extend their life and prevent breakdowns in the first place. A few minutes of work per year can save you hundreds or even thousands of dollars.