Our electrical system runs behind the walls and in our ceilings and floors. It is invisible, except for outlets and fixtures. Electricity is intrinsically counter-intuitive to think about. In fact, despite recent technological developments, we’ve only known how electricity works since the turn of the 20th century. So, you can be forgiven if even common residential electrics seem somewhat mysterious. Moreover, repairing these electrical systems requires the professional knowledge of a Kirkland electrician, who knows how to properly handle and harness electrical energy and run it safely through your home. In this post, we’d like to examine a few of the most common electrical repairs, so that you might be able to identify any problems and call for assistance.

Twilight Designs in Las Vegas, flush mount (recessed) step lights are often the fixture of choice when used indoors. He credits this to how easy it is to cut into and run wiring through drywall, especially when installing step lights after construction is completed. “While planning ahead is helpful,” says Bilik, “there are many products available for running wires post-construction.” He recommends 110v wiring to fish through walls and attics or low voltage wiring when 110v is not an option.

For less penetrable surfaces like concrete and stone, surface mounted fixtures are ideal because they mount directly to a wall or flat surface. These step lights commonly have a profile of as little as 3/4-inch up to 3-inches and a trajectory that directs light at the wall or at the surface below.

Regardless of whether you are using a flush or surface mounted step light, you must consider the type of cover (or faceplate) the fixture has. Bilik says that in his experience, most covers will fall in one of three categories, each with its own series of benefits: