Electricity may either be connected by 230 or 240 volts (these are called single phase circuits that are installed in most residential applications), or 400 & 415 Volts (3-phase). The latter are typically best-suited to provide power to heavy-duty appliances and equipment and in industrial settings as well as larger commercial applications.

Some people have electric kilns installed in their homes or garages because they indulge in making pottery or ceramics products. Certain homes have very elaborate and large, ducted air-conditioning systems. In all these situations, a 3-phase circuit would be required to support this heavy power usage.

The type of circuit used is dependent in the equipment or appliances installed on your property. It is important that you check the power & voltage requirements of the installations properly, before deciding what type of circuits you need. In most instances, even massive ovens and high energy-consuming heaters are typically singe-phase.

This current in amps has to be multiplied by the voltage to give you the power in watts. If a 3-phase supply is available, the total voltage of 24,000 watts will be divided by 3; this means 8000 watts will be used in each phase. This means the current in each phase is lower than 1/3rd of what it generally is in a single phase power supply (about 30 amps in each phase instead of 100).

The aspect to keep in view here is that if you have a 3-phase electrical connection, you will end up paying higher connection fees for it. In addition, you would have to pay fixed annual charges for 3-phase as well, so you shouldn’t be considering it for your new home unless it’s really needed.

Depending on the locality you live in, your property may also be connected to a SWER electrical line and many country areas have them. The SWER (single wire, earth return) delivers single-phase power. It is a very economical way of power distribution since it requires only a single transmission or active line. The earth is used as the return conductor and there is no neutral line.

In case you need to use any 3-phase motors in these settings, you would have to get a single-phase to 3-phase converter installed. Choosing the right phase is crucial to the optimal working of your equipment and for the safety of your property as well.

one of 11 retrofit kits designed to replace existing Metal Halide and High Pressure Sodium lights in their existing fixtures. Multiple mounting options are included so you can use these lights in fixtures such as high bays, flood lights, area lights, shoe boxes, street lights or wall packs, to name a few. Installation is simple and easy and is no more difficult than a bulb and ballast replacement. Patent Pending Heat Sink technology allows this LED retro kit to run significantly cooler than other heat sink designs. Because of this, the head itself is warrantied for 10 years. Utilizing high efficiency Nichia LEDs, these kits produce an incredible amount of light while consuming very little power to do so. Compare these to the competition, you will save a lot of money on your utility bill using our Retrofit kits compared to the competitions.

LED Retrofits can be installed anywhere including

A home inspection covers a number of areas, not the least of which is the electrical system. ElectricMan, a trusted certified electrician.

An electrical system inspection includes looking for any aspects that make the home unsafe. A good report features the following most common items:

With all of these points checked off the list, you know you have run across a home with a sound electrical system. It’s a great feeling knowing you’re moving into a home that won’t present trouble around every corner. That’s why it’s so important to have an inspection conducted by a qualified professional before you buy.

If you have any questions about the electrical system aspects of a potential new home’s inspection report, please contact a ElectricMan website, and don’t forget to ‘like’ us on Twitter.