The kitchen can be an accident-prone area. It can be the busy hub of the house, hosting multiple people and activities at a time. With a variety of large and small electrical appliances being used close to water, there are many potential hazards. Use these safety electrical tips to stay safe in the kitchen and avoid accidents.

Depending on how large or small your kitchen is, counter space can quickly disappear. While cooking a meal you can find yourself using multiple appliances including the stove. If you are not careful a cord from a blender can soon come in contact with a hot stove surface or a toaster oven. If it is left unattended the protective layer on the outside of the electrical wire will begin to heat up and melt. This damage will expose the inner wires and an electrical fire can start. When setting up an appliance on your counter, tuck the cable into a safe spot and keep track of the hot surfaces to avoid.

When baking or washing dishes water can make its way into just about any area. This can cause electrical shock and damage to appliances. Be extra cautions when using liquids around electrical cables and keep spills away from the outlet. To take it a step further you can use outlet covers on unused outlets to avoid liquids splashing into the sockets.

Fridges, freezers, ovens, and microwaves require a high amount of power. Their electrical demand can put a lot of stress on circuits in the home. By putting too many appliances on the same socket and circuit it will cause the breaker to trip. While this may seam like a temporary inconvenience, it is an indication of a larger problem. If this is an on going theme in your kitchen, it may be time to reorganize the arrangement of cables or upgrade your electrical circuits. The damage to appliances will cost a lot more in the long run.

When looking down the sides of your cabinets and counters you can find a lot of crumbs and dirt that you never noticed. Over the years this type of debris can collect behind appliances you never check. If this food is too close to an electrical outlet it could heat up and potential cause a fire. Make an appointment to check around all the outlets of your kitchen and clear out the dust, dirt, and food. While your guests may not be looking in these areas, this maintenance can avoid potential costly fires.

We know that when you are in the kitchen you are likely working overtime. But it is important to take some time to review your family’s safety in the kitchen. If you have questions about your kitchen’s electrical setup or potential issues you have noticed, contact Expert Electric at 604-681-8338.

We had a call today from a customer. They were looking to retrofit their existing fixtures with LED. The competitor did a quote for them, and had recommended LED Post Tops as the retrofit bulb of choice for them. And this would have been a terrific solution if all their fixtures were acorn style pole mounted lights. But they weren’t, they were high bays, parking lot lights and show room lights. Yes. They are LED. Yes. They will save you money. But if you are trying to plow a field, you don’t buy a Porsche. You buy a tractor. The right vehicle for the job. And the same applies to LED.

First, let’s make sure we set the score right. We sell both. We sell LED Post Tops and we sell LED Retrofit Kits. We are not Post Top biased or Retrofit Kit biased. We even sell new fixtures. We have no biases! We want what is right for you!

contact our team and we’ll get back to you.

The list of rules to be followed when installing new electrical systems into a building are related to the specific rules of the state, as well as certain minimum requirements laid down by Federal law. So in some senses the United States does not have a unified Electrical Building Code, because often there are variations between different states.

It was to address exactly this issue that the National Fire Protection Association, a panel of nineteen different bodies, began publishing the National Electrical Code (NEC) in 1897, and now every three years, in order to arrive at a single source of rules that should govern electrical installations. The current version was published in August 2010 and runs to over 1000 pages.

Whilst the NEC is not law as such, in practice it has been adopted by most states as their set of rules for electrical installations and wiring in buildings (with a few changes here and their depending on the state you are in), and so is now in practice the Electrical Building Code for the United States.

You can read the full 1000 pages plus version online for free here: Building Codes

This is the book that all Journeyman Electricians will consume when undertaking their training, as it is pretty much the standard version across the country.

Though there are some differences between the states, and you can see the individual requirements for your state here: State Regulations

Some of the key NEC rules that need to be followed when installing a new electrical system into a building are:

If you are planning on installing electrical wiring then you should refer to the NEC and your local Electrical Building Code for specifics and to the link above for any state specific requirements that you need to know.

Are you looking for energy saving tips to help your business reduce annual energy costs? Businesses consume far more lighting energy than homes, so if you’re looking for a simple and cost-effective place to start, addressing your business’s lighting solutions offers ample opportunity.

“Out with the old” should be your mantra here. Incandescent light bulbs are far from efficient, emitting 90 percent of energy as heat – not light.

The curly cousin of long-tube fluorescents, CFLs can be used in place of incandescents in standard light sockets. They contain mercury and should be handled with care; however, they use 75 percent less energy and last 10 times longer than incandescents.

Lasting 25 times longer than incandescents and using 75-80 percent less energy, LED lighting options have recently come down significantly in price. To get the most bang for your energy buck, LEDs are a top choice.

High intensity discharge lights are extremely efficient at producing large quantities of very bright light and are an excellent choice for warehouse and commercial settings. Be sure to talk to an electrician to get the best color spectrum to suit your needs.

Using 1/5 to 1/3 the energy as incandescents and lasting 10 times longer, these fluorescents offer flexibility in various commercial settings.

Twice as efficient as incandescents, halogens produce a very bright white light that is well-suited for outdoor applications such as security and stadium lighting.

Light dimmers and timers deliver just the right amount of light just when you need it, reducing energy use and costs. They also improve security while you are away and can enhance the functionality and ambiance of your business.

The future of lighting, we’re not talking battery-operated, but fully automated lighting powered by remote control and smart device applications. The technology of this solution offers you the capability to monitor usage and costs, with the added convenience of on-site and remote functionality.

Mr. Electric® will perform a complimentary evaluation of your current setup, analyzing for efficiency and function and offering lighting options that can lower your operating costs significantly.

Designed to your specifications, our experts can design custom lighting solutions that perform well and look great – all while keeping energy costs under control.

Security, landscaping, parking, retail – you name it! Whatever your lighting needs, Mr. Electric will spotlight your perfect solution.

Schedule a commercial electric energy audit today. A commercial energy audit can offer even more energy savings tips for the benefit of your bottom line. Mr. Electric can:

Don’t let excess energy costs drag your business down, get the energy saving tips you need with the help of Mr. Electric today!