If you live in an older home, you may notice your bathroom is missing a bath fan. While it is easy to chalk these things up to nothing more than an inconvenience, it is actually much more serious than that. Those bath fans do more than circulate the air in the small bathroom. They are an important part of your home’s construction according to an electrician. Pasadena homeowners will want to ensure the fan in each of their bathrooms is working properly and if one is not present, it is important to have one installed. The Electric Connection can take care of this for you.

Bath fans should be used anytime somebody is showering. The steam produced during a hot shower can wreak havoc on your walls, flooring and even the fixtures in the bathroom. Moisture can lead to mildew and mold. Warping of the wood in the floors and walls is also possible. A bath fan pulls the steam out of the bathroom and reduces the risk of these problems happening.

If you do not currently have a fan in a bathroom, you have plenty of options when it comes to choosing the right one for you. Of course, there are the old standards that are nothing more than a fan. But nowadays, there are plenty of options. Lights are a common addition to the fans available today along with heaters. If a person hates using the fan during a hot shower because all the warmth is pulled out of the bathroom, the heat provided by the fan will provide a warm, toasty environment when stepping out of the shower. The fan should be installed by an electrician. Pasadena homeowners can call The Electric Connection to have their new bath fan installed. Take a trip to your home improvement store and check out all of the options you have and then give us a call.

At the Super Bowl this Sunday, almost a third of the nation watched as a power surge caused the big game to come to a halt at the beginning of the third quarter. While the Mercedes Benz Super Dome sat only half lit for almost 40 minutes of what would be one of the most exhilarating Super Bowls of all time, millions wondered how the organizers of the game could allow such a mishap to occur.

A power surge is when a burst of electricity floods a circuit or electrical system, bringing with it the potential to seriously harm appliances, computers, lighting fixtures and any other kind of electronic. You'll usually notice one occurring when the lights in your home suddenly get much brighter for a period of time. Since the electronics in your home are only designed to handle the flow of electricity that regularly passes through the property, their wiring can be overwhelmed.

Sometimes these surges only occur for a short period, causing your lights to increase their brightness for what seems like just a few seconds. These instances are called power spikes and are less harmful to your electronics than a full-on surge, as the amount of time that your appliances are overwhelmed is generally brief.

A new thing we will be doing every here every month on the MyLEDLightingGuide’s official blog is curating things from all around the web relating to the LED lighting industry. Here are the types of articles and pieces of content that will often be featured on our monthly link roundup:

This post will be covering all of the happenings from the past month, September of 2016. We also plan to give a brief summary of each piece we include, just to get a better idea of what it’s about, who it’s for, and why it might be valuable for you to take a look at.

Without further ado, here is the first addition of A Month in The LED Lighting Industry Link Roundup…

High Bay Luminare and Lamp Market Expected to Reach $20.4 Billion by 2024

For anyone involved in the lighting industry, even remotely, this is great news to hear. As LED products become cheaper and cheaper overall, the resistance from facility managers to make the investment in LED fixtures is reducing. This trend seems to be growing, and there is seemingly only a positive future in LED; especially in the commercial lighting world.

As LED Streetlights Spread, Some Critics Look for Dimmer Switch

While some concerns relating to the light that LEDs give off is bad for street lighting scenarios, cities are still picking up the technology for obvious reasons (from cost reduction to higher quality lighting). On the contrary, critics are looking for these LED street fixtures to be dimmed down a bit, all for some fairly valid reasons that you will discover in this piece of content.

How LED Lights Influence the Bats Activity

To finish off this seemingly street light themed roundup, this post discusses the influence LED lights are having on bat activity. Is this a way for those with bat issues to deal with it or not? In short; they will reduce some issues you may have with bats and related night time animals. But check this one out to get a better understanding on how it may help.

Interesting Reads:

Here are some not-so-relevant but still relevant articles that we think are highly interesting and definitely worth the read.

First Pro Basketball Game Held on LED Court in Japan

Everyone probably knows light layering is the #1 rule in residential lighting design, but we can often neglect it in professional settings. Light layers can transform that standard gloomy, fluorescent malaise into something calm and energizing.

2. Take the layers outside too! The center’s entryway functions like a beacon in the night with those stylish ceiling lights, along with Image via CONTEMPORIST.com

If your business has a storefront or entryway, don’t neglect eye-catching light layers there either. You want to draw customers in, not scare them away.

3. Use standard fixtures in unexpected ways. A regular fixture in an unexpected place will be avant-garde, without the price tag of an avant-garde light fixture. Image via CONTEMPORIST.com

I’d also like to note those crazy recessed ceiling lights – totally echoing a standard recessed fixture only stylized and amplified. It makes you rethink the whole concept of a regular old recessed light!

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

ElectricMan Inc. is one of Plano’s most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com