According to the Electrical Safety Foundation International, more than 30,000 non-fatal shock accidents happen every year. Electrical shock is relatively easy to prevent if you know what to look for and what to avoid. With some basic knowledge and safety training, you won’t become a statistic. Read some of our quick tips below to find out how you can protect yourself and others from accidentally receiving an electrical shock.

Wall plates and light switch covers are not just there to make sockets look better–they keep debris out of the sockets and shield fingers from exposed wires. Never stick your hands or a metal utensil into a wall socket; the currents from an electrical shock can cause injury or even death.

Educate yourself on how the fuses, circuit breakers, and wires are set up in your home. This simple step can prevent injury and also allow you to know the limits on where you can plug in powerful tools and appliances. In addition, it can be helpful to match light bulbs’ wattage to your lamps. You can usually see the recommended maximum wattage printed around the light bulb socket. It’s wise to use light bulbs with equal or lesser wattage so you don’t overload the lamp wiring. It’s also good to know if your house is wired with aluminum or copper wiring, because these metals handle heat differently.

Any electrical equipment that sparks, gives out small shocks, frequently short circuits, or has frayed wires is not safe to use and may need to be fixed or replaced. If any wires are sticking out from the wall, don’t tamper with them. Have an electrician inspect the wires first, especially if they appear damaged.

When storing cords, don’t let them twist or get into haphazard knots or else they may tear. Tuck them away somewhere that small children can’t find them and pets can’t chew on them. Many hardware stores sell cord organizers to make this easy for you.

Try to avoid having too many heavy appliances plugged in and running from the same outlets or power strips. This can lead to overheating, a blown fuse, or an electrical fire. Use extension cords sparingly and try to limit their use to temporary arrangements when doing work around the house. If you’re constantly in need of extension cords, you might be better off just having another outlet installed.

Never leave electrical appliances somewhere they can easily fall into sinks or bathtubs. If an appliance accidentally falls into the water while plugged in, turn off the power to that circuit before you remove the object from the water. Then let the appliance fully dry and ask an electrician if it’s still acceptable to use. Store outdoor electrical appliances in a dry place where they are safe from rain, hoses, or swimming pools.

If you are working with electricity around the house, turn off all appropriate power sources and wear protective gloves and/or boots. Remove any metal jewelry and don’t wear clothing that could get caught on a wire. If you’re the one doing the work, do not assume that someone else has turned off the power sources. Always double check for yourself for your own safety.

Don’t hesitate to call a professional with questions if an electrical job is intricate or beyond your scope. A tiny mistake can lead to serious consequences, so hire a licensed electrician for any complicated or dangerous jobs.

Sticky lighting situation? Solve it with LED tape lights!

Here at Pegasus Lighting, we’re very excited to offer you innovative light fixtures to fit your every need. One product that’s really got it going on in the versatility department is LED tape lighting. If you’ve never seen tape lights before, they’re pretty much what they sound like, strips of LED lights with strong adhesive backing. They come in trimmable reels, are rated for use indoors and outdoors, and are available in white, colored, and color-changing varieties.

Need decor inspiration? Check out this saucy little video to discover all the different ways you can use tape lights for your home, office, interior, and exterior:

When will they catch you?

The days are getting shorter, the leaves are piling up higher and there’s a hint of pumpkin spice in the air. This can mean only one thing – Fall is near. This change in weather patterns and temperature will undoubtedly bring new challenges to electrical safety around the household. In order to stay safe and get the most out of your fall electrical services, please take advantage of the following 5 Expert Electric tips for Fall:

Although nobody enjoys the packing and storage of their Spring and Summer electrical household items, it’s a necessary chore that helps significantly protect the household from unnecessary electrical hazards. When packing up these electrical items, it’s imperative that they are stored safely and strategically in order to protect them from severe weather conditions. This includes warm weather tools such as lawn mowers, trimmers or any other electrical devices. It is also important to drain these household items of any leftover gas or fuel.

For outdoor projects that require electrical equipment, it is necessary to ensure that the equipment is weatherproof. Any lawn mowers, leaf blowers or other equipment should be able to withstand the cold weather, rain or snow that often comes with Fall. If you’re unsure whether or not your electrical tools are weatherproof, feel free to contact our team of electricians at Expert Electric.

Dry leaves are often overlooked as an electrical danger. To ensure your household’s safety in Fall, keep all dry leaves away from any electrical equipment including lighting, cords and outlets. Make this part of your household routine and get into the habit of cleaning up all the dry leaves.

It’s best to get an early start on this tip and get it out of the way before the cold weather and rain roll in. Set aside a couple of hours on the weekend to inspect all outdoor electrical wiring and cords to ensure they are damage-free. Even a small rip or tear in an electrical cord can make any devices susceptible to danger.

Since you will already be setting aside some time to inspect your electrical wiring and cords, take a few hours to also review all outdoor electrical equipment for any damage. This includes pools, hot tubs, saunas and more. Ensure that all of the equipment is operating properly and that any damage is fully addressed and handled before severe weather conditions roll through.

Have any questions about fall safety tips or electrical services? Expert Electric has all the answers! Please visit out contact page for a local number near you or fill out one of our online forms.  The Expert Electric team of licensed electricians is here to ensure all of your fall electrical projects are handled safely and efficiently.

Knowing when to install a new circuit in your home or business may seem like a daunting task. After all, you’re no electrician, and figuring out the details seems stressful! To which we at Kolb say, “No Problem!” There are specific cases and situations where installing a new circuit is really necessary, and all said it’s pretty clear when you need one. That is, if you know what you’re looking for.

Need a new circuit installation for your home or business? Contact our specialists today!

We’ll skip the science lesson and spare you the details of Ohm’s Law (though it’s fairly interesting reading), and other laws that apply to circuits. What you need to know is that a circuit is a dedicated device that houses electricity reserved for a specific task. Like a circuit for running your fridge, or to plug in your dryer.

A circuit operates in a loop, delivering electricity to the object in need of power, and then returning the electricity to the source (your electrical panel) when on or off. So, why would you need a new circuit? There are two primary cases:

If your circuit is not operating properly, it’s obviously time to seek a replacement. Not doing so can create some serious issues, the least of which is your appliances not running. A busted circuit can present serious dangers to your home, and should be addressed immediately. You can spot one by:

The other common time to get a new circuit installed is when you plan to add new, improved or newly existing appliances to your home. Many common use electrical machines require a lot of power, and plugging them into an existing circuit shared with other items will likely result in breaker flips.

Why? because a circuit is designed to supply a very specific amount of power, via your breaker. If you exceed the limit the breaker places on your circuit, the breaker will flip and refuse to allow the supply. This is why refrigerators, air conditioning, washing and drying machines and microwaves are often given a dedicated circuit.

Kolb has proudly served our area for years, and brings the best service and experience in the industry available. Our certified electricians can offer all of the skill, knowledge and tech needed to get your electrical project done right. At Kolb, your needs are our number one priority. Contact us today to learn more about circuits, and whether or not you may need a new one!