We live in an area where there are many very old homes. Within these homes, as you’d expect, is very old wiring. Even if you have not had trouble with your wiring just yet, and even if your wiring appears to be in fine condition, you should keep in mind just how much the demand for electricity in our homes has gone up over the years. The original owners of your old home were not running whole-house cooling systems and charging multiple phones and tablets while also powering a dishwasher, after all. Overloading the circuits in your home can be quite dangerous, both to your family, your property, and your appliances/electronics.

Even if the circuits in your home are designed to keep up with your electrical demand, the fact remains that the materials composing your electrical and wiring systems will degrade over time. When they do, it really doesn’t matter if your wiring is capable of handling your existing electrical load or not. The degradation of wiring insulation and other materials will render any system unsafe.

While outdated circuitry and degraded materials can lead to a lot of blown fuses/tripped circuits and other issues, the real concern with very old wiring is, of course, the risk of a fire in your home. When it comes to old wiring, you really cannot afford to adopt an “out of sigh, out of mind” attitude. If you are uncertain of how old your electrical system is, but know that your house is quite old, you should give us call to have the system evaluated. We are happy to help.

House wiring has undergone some dramatic changes in the last hundred years. What was once a relative luxury is now accessible (and even required) in just about everyone home in the country. That isn’t to say that all wiring is created and maintained equally, nor can we confidently say that any Des Moines home is safe for your family without giving it an on-site look.

If you’ve ever done a renovation or addition to your home, you know the nightmare that city and county building codes can be. It seems like someone at the city and county clerk’s office is sitting around all day dreaming up new ways to make your progress come to a screeching halt. While your home may not have been built anywhere near today’s level of code, it still works just fine. Right? Well, while some building codes may be a tad excessive, often they use technologies that the electricians of the past would love to have had a chance to use. While it may come as an inconvenience, remind yourself that the technology available today can keep you and your family safe in a number of impressive ways. From safer walls and greatly decreased risk of house fire to GFCI outlets that will automatically detect an unsafe circuit and trip the breaker, killing the power and potentially saving a life.

Homes built after the 1940s were made with far safer wiring than any before that. Hopefully, by now, any home that predates that period would be completely re-wired with a new electrical panel for the longevity of the home, but this is wishful thinking. Today, millions of homes across the country and a good deal in Des Moines are essentially ticking time bombs, putting all of those inside at risk for electrocution or worse. While we don’t want to spread fear heedlessly, if you are considering the purchase of, or currently own, an older home, then you should get in touch with a licensed electrician to check the safety of your electrical system. Hopefully, everything will look and respond correctly, but there could easily be opportunities for improving the safety of your home.

In addition to the much older homes in the Des Moines area, newer homes are home to their own problems. If you ever notice an outlet begin to stop working unexpectedly, hear a buzzing in the wall, or even feel a current running, then you should make calling an electrician your top priority. Thousands of homes catch fire every year due to poor or faulty wiring, making this nothing to wait on, ignore, or even attempt to DIY; electricians should handle any blatant problems with your house wiring to keep your home safe. With homes popping up in and around Des Moines, our electricians have seen a surprising number of errors that could have been avoided by a more attentive installation, but that is a blog for another time.

If you suspect that your home’s wiring may be facing some issues, it really isn’t worth delaying to get in touch with the local electricians at Electrical Gurus. We have the tools and experience necessary to quickly determine what, if anything, the problem may be and then implement a fix that will keep your family safe. We understand how important it is to find affordable, trustworthy service for your household, which is why we take each call seriously and employ only the best local electricians.

It is estimated that each year around 3,500 Americans die in home fires and 20,000 are injured. A leading type of home fires is the electrical fire. This is especially true in regards to manufactured homes. When it comes to breaker panel fires, there are currently two different brands of panels that have known manufacturing flaws that puts anyone with one of these panels at risk for an electrical fire. Zinsco panels and Federal Pacific Electric panels are known for the dangers that they pose. In addition to these two brands, there are also many people who have panels older than 40 years old that may not provide the protection that is needed to protect their homes properly from electrical dangers. If your home has one of these panels, you should get in touch with an electrician in Pasadena right away to ensure that the proper steps are taken to safeguard you and your family.

Federal Pacific Electric Company (FPE) Panels

The FPE was one of the largest circuit breaker panel manufacturers in North American from the 1950s to the 1980s. As time went on, many electricians discovered the dangers that these panels posed to the families that they were supposed to protect. It is now known that FPE panels may appear to work for many years, but can overheat and become a fire hazard after only one short circuit or overcurrent.

If you have a breaker that fails to trip whenever it is supposed, it can allow an incredible amount of electricity to enter your home from your electrical utility company. Whenever this happens, it can lead to severe overheating and electrical fires. As a result, many panels such as these older FPE panels can eventually catch on fire, leading to a very serious issue for any homeowner.

Zinsco Panels

Zinsco panels were also very common at one point in time. Although there are not many of them remaining, they can be very dangerous in the modern setting. These panels are simply not designed to handle the amount of electricity that we use every day.

For more information on electrical panels, (Click Here), or to schedule an electrical panel upgrade, call our team at The Electric Connection today.

Your local electrician can handle a wide variety of jobs including powerpoint installation, switchboard upgrades, outdoor lighting, installation of electrical fixtures, CCTV installations and a lot more. While they handle all these jobs expertly, they can also handle new wiring installation and wiring upgrade projects. Here are some signs that indicate the wiring on your property needs an upgrade:

If you live in an older home which has wiring that’s over 15-20 years old or have moved into a home and have begun noticing too many current fluctuations, it’s important that you call in a skilled and licensed electrician to check the wiring on your property. If you have lived in the same house for over a decade and can’t recollect when you last got the installations inspected and tested, don’t defer calling in an electrician to conduct a thorough inspection.

Take a look the outlets in your home; check whether they are 3-pronged or 2-pronged. If you find there are various 2-pronged outlets on your property, it’s time for you to call in an electrician. These outlets are undergrounded and can pose a fire-hazard. You would have to get these replaced with 3-pronged ones and ensure that these are grounded. The other alternative is to replace these with GFCI outlets as this will help protect your property. Your electrician will be able to evaluate your property’s needs.

Many homes that were built in the 1960’s & 1970’s had aluminum wiring instead of the safer copper wiring. The former is prone to loosen over time and this increases the fire risk in your home, whenever any outlet is in use. When you get the wiring on your property inspected by an electrician, he would be able to tell you if there is any risk and will provide a suitable solution to the problem.

Modern day appliances are power-guzzlers and modern wiring systems are specially designed to bear these loads. However, any installation that is a few decades old is unable to bear the load of modern appliance such as washing machines, dishwashers etc. If you have more than one heavy appliance operating on one electrical circuit in your home, that can pose another problem. The excess load causes the older wiring to get heated which in turn melts the insulation around it. This exposed wiring results in arcing (hissing, humming sounds). If you ignore these signs and don’t get the installation checked in time, it can result in an electrical fire.

In most instances, wiring upgrades go hand-in-hand with switchboard upgrades. This is because decades’ old wiring systems also had older switchboards with fuse installations. If you find that the fuses in your home keep blowing very often, that’s another indication that your electrical wiring may need to be upgraded.

The electricians will replace the fuses with modern safety switches/circuit breakers. This improves the safety aspect of the electrical installations in your home. When you are getting any electrical work done on your property, it’s important that you hire the services of experienced and licensed professionals that provide guarantees for their work.

If you have noticed any of the signs we just discussed and feel your property may require a wiring upgrade, call AllRound Electrical without delay. Regardless of whether you want to get an electrical fixture installed or need complete rewiring done on your property, we are the professionals to hire. For any information about our services, feel free to call us at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263