You're probably familiar with some of the federal energy efficiency programs by now. The most prominent, the Clean Power Plan, was announced last year with ambitious targets to limit carbon and other pollutants generated by the nation's electrical work. What you might not be aware of is the amount of impetus placed on the individual states to enact programs that advance the federal goals. Through the Clean Energy Incentive Program, or CEIP, states are responsible for reducing their carbon emissions by 2022 through renewable energy generation or increased efficiency measures. Read on to learn more.

States Picking up the Slack on Conservation

The Clean Power Plan sets a goal to reduce carbon emissions by 32 percent below 2005 levels by 2030. Although it is a federal rule enacted by the Environmental Protection Agency under the Clean Air Act, the national government doesn't actually have control over the nation's electrical work, so the plan requires the cooperation of the states to come to fruition. In turn, the states will have to work with big polluters within their borders, primarily power plants, to bring emission levels down.

The federal agency is using emission rate credits as the carrot to incentivize the conservation measures, rewarding states for their reduction in fossil fuel consumption, which the states then pass on to the individual power generators and other industry players. Other options include household and industry efficiency programs to encourage people to purchase modern appliances and otherwise reduce the consumption in their electrical work. In total, the EPA is pushing states to reduce carbon emissions by 300 million short tons.

State Help for Increasing the Efficiency of Your Electrical Work

One interesting aspect of the EPA program is that it contains extra incentives for states that focus on initiating programs in low-income communities. The exact parameters haven't been worked out yet, and various programs will still work differently in different states, but essentially the federal agency will provide twice the credits for projects that affect low-income households. That means states will have an easier time reaching their goals, and the most vulnerable residents of an area have a better chance of participating and realizing savings from the Clean Power Plan.

Regardless of what your income level is, you should keep an eye on any efficiency programs coming from your state in the coming months and years. While much of the work is aimed at power plants, other assistance may be available to homeowners to purchase new appliances, invest in residential renewable energy like solar panels or otherwise decrease both energy consumption and utility bills in the household.

Trust the Experts for All Your Home Service Needs

If you need help figuring out how to reduce your household spending on electricity, or have any other issues with your home electrical system, contact a professional electrician today.

A bad circuit breaker is a major inconvenience, but there can be other issues at play when your power supply isn’t working the way it should. Breakers protect you and your home from current overloads and other electrical issues. If the circuit gets overloaded, the breaker will trip, cutting power to eliminate the risk of fire. Sometimes a breaker will trip even when there is no overload, but it can be tricky to figure out which situation applies.

If you think you have a bad circuit breaker, look out for the following signs so you can get the problem taken care of quickly.

If your breaker is tripping, it could mean there is a device on the circuit causing an overload. Identifying what circuit the breaker is protecting can help you figure out if the problem is with a device or with the breaker itself. There might be a label on the breaker panel that gives you this information, but if not, you can figure it out by testing your lights and devices. If you disconnect the devices connected to the circuit and try to reset the breaker again, the outcome will confirm whether you have a faulty breaker. If it still trips even without the devices connected to it, it is defective and needs replacement.

Right this instant you are probably enjoying light provided by a CFL or an incandescent bulb. Buying and installing this kind of light sources is an automatic process. It`s popular, you buy it and when it does not work anymore you just go to the store and replace it. Little do people know about the hidden dangers of these light sources and their utter inefficiency, not to mention the way they damage the environment.

Let`s take each one and see why they are not the best option.

Incandescent bulbs have been around for a long time, being quite simple and cheap. While in the past they may have been revolutionary, today they are ineffective and their production will soon be stopped. Incandescent bulbs have several disadvantages and can`t even compare to, for example, LED lighting:

Sure, manufacturers strive to create better variations but they are all costly and do not improve the initial concept by a whole lot.

CFL are much better than incandescent bulbs and replaced the latter in many places but they are still not quite the best option, even if they can last up to 12000 hours (no match to LEDs, which go up to 200000 hours). What are the problems?

A deep and attentive analysis like this one reveals just how many things we are used to ignore. Fortunately, a better alternative makes both CFL and incandescent bulbs seem utterly irrelevant. The alternative is LED lighting, a known technology that is now applied to public and private lighting. It is ten times more efficient and it is not a threat to the environment or to you.

This is the time of year you need to be worrying about an active storm season. Sure, the weather is mild right now, but you never know what Mother Nature has in storm for us. It could be a rough winter with lots of storms that threaten to knock out the power. A power outage is slightly romantic until you have to go without electricity for hours. Trying to figure out how to make dinner or take a hot shower is not fun. You don’t have to deal with all the issues a power outage can cause if you give your electrician in Glendale a call. The crew at The Electric Connection knows you don’t want to go without power for several hours or days. There is a solution—a standby generator.

A standby generator is one of the best options to keep your home powered when the grid goes down. The size of generator you will need depends on what appliances you need to keep running and the overall size of your home. Your Glendale electrician can help you determine the wattage needed to keep essential lights on as well as keep your refrigerator and other appliances powered. If you are planning to run your furnace or AC in the summer, you will need a larger generator. Don’t worry about trying to figure out what you need. Leave it to your electrician. Glendale homeowners won’t have to worry about anything other than the maintenance schedule for the generator.

The electrician will take care of everything, including installing a transfer switch that ill automatically switch the generator on the moment the power goes out. You won’t have to worry about turning it on or running cords to the generator. It is all done for you. This means, your home will stay powered, even if you are not there to flip a switch. Give The Electric Connection a call today and schedule your standby generator consultation.

A school, whether its grade school or a college campus, can use up a lot of energy during the day. From heating the building to inefficient lighting fixtures in the building; a school that is running 8-10 hours a day can prove to be a huge consumer of energy and thus; a high overhead to maintain.

This post is specifically for those whom work for a school or college campus that can either make the decisions, or can recommend new ideas to those who do make these types of decisions. The overall goal of this post is to bring the most actionable energy saving ideas for schools so that you can start looking into them immediately.

We are going to be covering 15 practical tips and ways that you can start saving energy in schools and become a greener, more sustainable facility overall. Here they are…

hallways, classrooms, and really anywhere with lower ceilings that are flat.

This technology is, more often than not, fluorescent. Believe it or not, this actually isn’t the most energy efficient lighting technology out there. So what is you ask?

Well, LED technology is by far the most efficient luminaire on the market today. By switching from fluorescent to LED, you will be able to realize a 30% reduction in energy usage associated with your tube lights.

As for you parking lot and sports fields, you can make the switch away from technologies like metal halide or HPS over to LED and realize every greater energy savings by up to 75%! Talk about a lot of energy being reduced.

And no, screen savers don’t save energy. But, what does save energy more-so than a screen saver is the “sleep” function that every computer has. On top of that, next time you plan on upgrading your computers, make sure you buy Energy Star qualified ones. This means they’ve passed some energy efficiency tests and are much more energy efficient than non-qualified computers are (same with your lighting system, make sure it is Energy Star or building commissioning, you get every single last area of your school inspected to ensure it is running exactly how it was designed to run. A lot of times we overlook things that are unique issues to your school, and no matter how long of a list we read on ways to conserve energy at school; we will never see everything. So our tip for you is to bring in a professional to do a full building commissioning audit, and let them tell you what is up.

Face it, a lot of classes happen during broad daylight and by not using up that free light from outside is a pure waste. By opening blinds to there fullest (when appropriate) you can reduce the amount of lights you need on by nearly half, depending on the day and time of year.

Just make sure to remind everyone to do this otherwise, you’ll never will with this tactic. Remember: you need to get the school on board or else you can only do so much.

Alternatively to just opening the blinds and windows, installing skylights into virtually any area of the building can be an even more effective way of getting the most natural light into your building. This is probably most beneficial for areas that would otherwise have no natural light whatsoever, such as hallways or interior rooms.

We’ve already brought up some points about your heating system, but here is yet another. Think about how often students are in the hallways, not nearly as much as they are in classrooms, right? So, why not make an initiative to heat the classrooms and stop heating those huge hallways that waste tons of heat to the outside from all those doors being opened.

Just make sure that everyone is closing their doors if you do decide to go this route. Likewise, you could install doors that automatically close which will prevent random doors from being forgotten about.

Although this won’t directly save your school energy, it sure does help reduce both waste and energy associated with creating new materials. The most simple way to start the promotion of recycling at school is simple; make it readily available. If you aren’t putting recycle bins next to every trash bin, most people won’t go out of there way to recycle so they will just throw it away and let it go to the landfill.

A step further would even to start investment in solar technology can be hefty, but rebates and grants are out there to make it a more affordable option that ever. On top of that, you are becoming a role model to the community by showcasing what conserving energy can do when used with solar energy technology. Let solar generate your building a positive ROI all while conversing the planets resources.

We think the list could endless of all the possible ways to save energy in school, so we must of forgot some. Be sure to comment down below your energy conservation tips that will help out school facilities become greener!

Conclusion

All of these tips are exactly how energy efficient schools are becoming more sustainable, reducing ongoing costs, and generating a positive atmosphere and educational system for students and generations to come.

Don’t let the upfront costs scare you, instead look at the bigger picture. If you have to invest money now to save 10x later, isn’t it worth it? All of these things will do just that, improve the bottom line. And not only are we doing that, but we help the environment out just a little bit too. Sounds like a win-win to us! Just remember that saving energy at school doesn’t have to be hard, just take it step by step and you will slowly see the results of your efforts build up!

Anyways, to wrap it up we’d like to invite you to share any of your own energy conservation tips for schools that you may have done or even just thought of that may benefit other schools across the globe. Share your tips in the comments below, you never know who it may help. And remember, an energy saving school is a happy school!