These days’ computers exist in our homes within one form or another. These machines are quite valuable and expensive, and damaging them is not a good feeling. As computers run on electricity, improper use and function can result in electrical related damage. Keep these following simple tips in mind when working with your computers.

We have previously talked about the proper use of extension cords in the past, but this is especially applicable for computers. Extension cords are not meant to be a permanent solution when it comes to placing your computer away from an electrical socket. An extension cord can hinder surge protection and make the computer vulnerable to shocks that can damage the computer hardware.

If you have a computer, laptop, or monitor, the power cord likely has three prongs. These are not suggestions. Too many times people will try to fit these cords into two-prong sockets. The button prong that only appears on some cords is actually the grounding cable. This protects us from electrical currents that can spread to the metal casing surrounding the computer. If the grounding prong is not connected properly, you are risking a chance of serious electric shock.

Electricity powers computer hardware, but too much of it can damage the components. With a GCFI outlet you add another layer of protection to your devices. If there is an electrical storm or problem with your home electrical system and a surge occurs, you can rest assured that it will not reach your devices.

If you have an office setup that includes a monitor, computer, and printer a surge protector is highly recommended. The surge protector will shut off when a surge is detected and protect the electrical devices. Make sure that you know the load that the electrical devices have and check that both your electrical circuit and surge protector are rated for that load. If not, you will find the surge protector or breaker tripping constantly.

If you are setting up an office with computer hardware and electrical equipment, or require GCFI outlets in your home, contact your local Expert Electric. We can help to review your setup and provide you with solutions to keep you and your hardware safe.

Between buying presents and decorating your home, the holidays can get expensive. Not to mention, your

Let's face it: stringing your house with thousands of additional holiday lights is going to get the meter running in overdrive. To help put this in perspective: Americans spend

When you're hosting loved ones over the holidays, you have more lights turned on throughout the house as guests fill up previously unused bedrooms. Offset this increase by limiting the amount of time that you keep the decorative lights on with a timer. These decorations may be festive and amp up the Christmas spirit, but you only need to leave them on for a few hours every night to enjoy them.

If you really want to set the mood, rely on candles and the fireplace to provide light as well. This small adjustment can make your home feel more intimate and ignite the holiday spirit in all of your guests. Just remember to follow the necessary

You're cooking for a horde of people when the family stops by for holiday meals. Between your electric stovetop and microwave, the wattage is going to be through the roof. To minimize costs, optimize the preheated setting of an oven.

Preheat your oven only when you are ready to use it and cook your dishes at the same time (if they need the same temperature) or in a row (from lowest to highest temperature). This will prevent wasting the energy needed to preheat the oven prior to cooking.

By following these five electric bill savings tips, you can prevent your debt from being out of control when you start the new year.

Your generator can literally be a lifesaver during an emergency, providing you with power, light, and heat when a disaster strikes or a blizzard renders your neighborhood powerless. However, in order for it to do its job effectively and efficiently, it has to be ready to go on a moment’s notice.

This means that it should be tested routinely, and repaired when needed. The good news is that if you do need repairs, we are here to help. But in what cases would you need this service? Keep reading for 3 reasons your generator may need repair.

The longer your generator lasts, the more likely it is to spring a leak from a hose, line, or storage pan. The leak may come in the form of oil or fuel depending on what type of generator you have. Or, it may even be the coolant, which is designed to keep the engine block from overheating. If you ever spot any puddles around your generator, give our professionals a call right away.

If generators sit too long without being used, the battery can become drained, and problems can develop with other components of the engine as well. If your generator struggles to start up or if it runs fitfully, then it is time to call for service.

When our technicians come to inspect your generator, we’ll take a close look at the wires, buttons, and other electrical components. If they show any sign of damage, the unit should be repaired. These signs can include frayed wires, loose connectors, buttons that stay stuck when you press them or even overloads that shut the generator down when you need it.

The best way to determine if your generator needs repairs is to schedule annual maintenance, but also to conduct a visual inspection yourself at least every few months. It’s also a good idea to run it for 15-30 minutes to listen and look for any trouble it may seem to have.

This is the final post in our four-part series, "The Secret Guide for Super Moms” — tips, tricks and hacks for busy moms who need to know everything that’s happening in their house.

If you believe Pinterest, every home repair or improvement project can be a do-it-yourself job. Apparently, if every blog is to be believed, moms and dads around the country are remodeling bathrooms, rebuilding old houses and refurbishing vintage furniture -- and they do it all the time! And they look great doing it! And they have plenty of time to take lots of photos!

Maybe some people really are able to do it all (and write about it, too). Most of us are too busy and simply don’t have the training to do more than the basics around the house. When it comes to potentially dangerous repairs, a super mom knows that she needs a professional. When the time comes to fix, rewire or repair her home’s electrical needs, she knows she needs an electrician.

Electrical wiring is complicated and can be dangerous -- and it's tough to spot signs you need an electrician. An amateur electrical job may cause poor wire connections, overloaded circuits or faulty grounding. These situations are hazardous to you, your family and your property. While it may be tempting to try saving money by doing it yourself, or trusting your spouse or a friend to help, you're better off spending the money to have the job done right.

Let's take a fairly common scenario: your fuses keep blowing, or your circuit breakers keep tripping. Yes, you can keep replacing the fuses, but do you know whether they're the right type? Screwing in a 20- or 30-amp fuse as a replacement for a 15 is tempting—no electricians needed, right?—but now you've created a fire hazard by overloading your wiring. The smarter move: call a professional, certified electrician to wire a new circuit.

Like fuses, circuit breakers are meant to prevent circuit overload and the risk of fire, but we use much more electricity than people of our parents' or grandparents' generation. As you upgrade and add appliances and gadgets, you may need to upgrade your circuit breaker panels to adequately supply your home with power. Hire an electrician to do the job, not your brother-in-law who swears he did the same kind of work in the navy. The work is extremely complicated and should not be attempted by an amateur.

A bad circuit breaker is a major inconvenience, but there can be other issues at play when your power supply isn’t working the way it should. Breakers protect you and your home from current overloads and other electrical issues. If the circuit gets overloaded, the breaker will trip, cutting power to eliminate the risk of fire. Sometimes a breaker will trip even when there is no overload, but it can be tricky to figure out which situation applies.

If you think you have a bad circuit breaker, look out for the following signs so you can get the problem taken care of quickly.

If your breaker is tripping, it could mean there is a device on the circuit causing an overload. Identifying what circuit the breaker is protecting can help you figure out if the problem is with a device or with the breaker itself. There might be a label on the breaker panel that gives you this information, but if not, you can figure it out by testing your lights and devices. If you disconnect the devices connected to the circuit and try to reset the breaker again, the outcome will confirm whether you have a faulty breaker. If it still trips even without the devices connected to it, it is defective and needs replacement.