Your local electrician can handle a wide variety of jobs including powerpoint installation, switchboard upgrades, outdoor lighting, installation of electrical fixtures, CCTV installations and a lot more. While they handle all these jobs expertly, they can also handle new wiring installation and wiring upgrade projects. Here are some signs that indicate the wiring on your property needs an upgrade:

If you live in an older home which has wiring that’s over 15-20 years old or have moved into a home and have begun noticing too many current fluctuations, it’s important that you call in a skilled and licensed electrician to check the wiring on your property. If you have lived in the same house for over a decade and can’t recollect when you last got the installations inspected and tested, don’t defer calling in an electrician to conduct a thorough inspection.

Take a look the outlets in your home; check whether they are 3-pronged or 2-pronged. If you find there are various 2-pronged outlets on your property, it’s time for you to call in an electrician. These outlets are undergrounded and can pose a fire-hazard. You would have to get these replaced with 3-pronged ones and ensure that these are grounded. The other alternative is to replace these with GFCI outlets as this will help protect your property. Your electrician will be able to evaluate your property’s needs.

Many homes that were built in the 1960’s & 1970’s had aluminum wiring instead of the safer copper wiring. The former is prone to loosen over time and this increases the fire risk in your home, whenever any outlet is in use. When you get the wiring on your property inspected by an electrician, he would be able to tell you if there is any risk and will provide a suitable solution to the problem.

Modern day appliances are power-guzzlers and modern wiring systems are specially designed to bear these loads. However, any installation that is a few decades old is unable to bear the load of modern appliance such as washing machines, dishwashers etc. If you have more than one heavy appliance operating on one electrical circuit in your home, that can pose another problem. The excess load causes the older wiring to get heated which in turn melts the insulation around it. This exposed wiring results in arcing (hissing, humming sounds). If you ignore these signs and don’t get the installation checked in time, it can result in an electrical fire.

In most instances, wiring upgrades go hand-in-hand with switchboard upgrades. This is because decades’ old wiring systems also had older switchboards with fuse installations. If you find that the fuses in your home keep blowing very often, that’s another indication that your electrical wiring may need to be upgraded.

The electricians will replace the fuses with modern safety switches/circuit breakers. This improves the safety aspect of the electrical installations in your home. When you are getting any electrical work done on your property, it’s important that you hire the services of experienced and licensed professionals that provide guarantees for their work.

If you have noticed any of the signs we just discussed and feel your property may require a wiring upgrade, call AllRound Electrical without delay. Regardless of whether you want to get an electrical fixture installed or need complete rewiring done on your property, we are the professionals to hire. For any information about our services, feel free to call us at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Over the years standards for building homes have improved to offer more safety and reliability. Unfortunately, there are still homes out there with old electrical wiring in them that could cause electrical hazards. These old wiring types (knob and tub wiring) should be replaced as they can result in extensive damage to your home over time if not properly taken care of. Know what to look for in your home and upgrade your wiring.

There are several common signs that can indicate your home’s wiring may be old and out-dated. If you notice these issues occurring in your home, it may be time to contact an electrician and have a home electrical inspection. Common signs are:

Knob and wiring tubing can be found in homes built around 50 years ago. If properly maintained, knob and wire tubing can be safely used in your home. But often over the years the wiring can begin to crack and break down leading to exposed wires. Because of the age of the wiring it often will not reach current code and can prevent your home from being insured in some cases. Overtime knob and wire tubing can heat up and requires sufficient air space around the wiring. Any contact with insulation or wood can result in a fire.

In some cases you could experience some of the issues listed above and you don’t have knob and wire tubing. In many cases, when a home was originally built it was brought up to correct standards and has potential hazards all over. If you are unsure of the status of your home’s electrical wiring or you are experiencing some of the signs listed above, we highly recommend that you have you’re home inspected. An electrical inspection can catch potential hazards and also lead to better electrical efficiency.

To schedule a home inspection, contact your local Expert Electric at 604-681-8338.

We’ve added a new line of 

Using 316 marine-grade stainless steel and polycarbonate lenses, the 60-, 120-, and 180-watt LED boat lights resist damage from shock and vibration. Hardware is included for surface-mounting on a variety of transom types, and the LED lights must be completely submerged to function properly. To prevent failure due to out-of-water use, a built-in temperature protection circuit powers the lights off if they reach 194 degrees Fahrenheit. The underwater boat lights operate within a wide 9-32V DC range and are designed to last 50,000 hours.