As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

Looking to buy or rent the perfect vehicle for your summer vacation? You might want to consider going electric. From reducing carbon emissions to improving air quality and limiting noise pollution, electric cars are a great alternative to regular vehicles and can save you money on gas! The benefits of an electric car surpass the benefits of other vehicles while helping the environment. Here are a few reasons why using an electric car will be great for your summer vacation!

Greener Alternative

According to EPA estimates, transportation accounts for 28 percent of U.S. greenhouse gas emissions, 80 percent of that belonging to automobiles and trucks. How much are you contributing? While electric cars produce slightly higher manufacturing emissions than traditional vehicles, after you consider vehicle manufacturing, fuel combustion and fuel production, the carbon footprint of an electric vehicle is nearly half that of its gas-powered cousin – 300g CO2e/km for the average gas vehicle versus 180g CO2e/km for electric. This protects not only the environment, but your wallet as well!

Increase in Charging Stations

The number of charging stations available for electric cars across the U.S. is increasing in response to the surge in popularity of electric cars. More than 9,500 electric stations and over 24,000 charging outlets are available across the country, searchable by zip code. Since 2010, more than 18,000 stations have been added, including free, pay-as-you-go and monthly subscription style services. Many states are also rolling out tax incentives to increase accessibility to charging stations at home and during travel.

Electric vs. Gas Power

Powering electric cars is cheaper than fueling cars that operate on gasoline. Solar and time-of-use (off-peak) electricity pricing also decreases the costs of operating electric vehicles, and available government grants and tax incentives can greatly reduce the sticker price. Add to that the fact that electric vehicle prices are continuing to fall while gasoline prices continue to rise, and you’ve got a recipe for some serious saving!

No Tailpipe Emissions

Nearly all credible researchers believe that electric cars, even in coal-dependent regions, have a smaller environmental impact than conventional vehicles. In regions with a strong grid mix of renewables—such as hydro, wind and solar—or for electric car drivers with home solar, the emissions benefits are dramatic. You can expect some analysts to argue the opposite. But it’s undeniable that electric cars don’t have a tailpipe, and therefore provide a real benefit to improving air quality for you, your family, and your community.

Home Recharging

If you decide to purchase an electric vehicle, there’s a good chance you’ll never have to go to the gas station again. All you have to do is pull into your garage or driveway, reach over for a plug, and push it into the charging inlet. It’s very convenient and takes all of about 15 seconds. Wake up the next morning, and you have a car ready to go another 80 to 100 miles—or double that, depending on the model. That’s plenty for everybody except interstate travelers. (The charging task can be more difficult for people living in condos and apartments, but access to multi-family and workplace charging is improving every day.)

Renting an electric vehicle for your summer vacation could save you a lot of money and trips to the gas station. This will leave extra money in your pocket for other fun things to cross off your vacation bucket list. Who knows? You may end up loving your experience with an electric vehicle that you’ll probably buy one when you get back from your vacation!

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

When you need an electrician it can be difficult to scan through the listings online and pick just the right one. You just never know what you are getting. It’s not like there is an app for that. You need to have an idea of the qualifications you should look for before you hire somebody to come into your home and do work. Before you hire an electrician in Pasadena, follow these guidelines. You can always count on the team at The Electric Connection to meet each of these qualifications.

A licensed electrician is an absolute must. The company the electrician works for should also be licensed. A person who has gone through the licensing process gives means they have met certain knowledge requirements.

The company you hire should be bonded and insured. This protects you in case of an accident that damages your home or an accident the electrician suffers while on your property.

Reputation is very important when it comes to hiring an electrician. Pasadena homeowners will want to talk with others who have used the company’s services to find out if they were pleased with the work that was done. Electricians work hard to build up a solid reputation because they know how important it is to getting more work.

You will want a company that hires electricians who are reliable and will show up when they are scheduled. You have a busy life and need to be able to count on an electrician to be there on time and to complete the work in a reasonable amount of time.

A company that is trustworthy is also essential. Often times the work will be performed when you are not there. You need to know the electrician will finish the job without you looking over his or her shoulder.

If you are ready to hire an electrician, you can count on The Electric Connection to meet and exceed all these expectations.