Although a lot of people know what surge protection is, some people don't have the slightest clue. This article will explain what surge protection is and help you understand why it's important.

What Exactly Is Surge Protection?

Surge protection is what protects your electronic devices and appliances from spikes in electrical voltage. A surge protector will basically limit the amount of electric voltage that is allowed to reach the electronic device or appliance by blocking or grounding unwanted voltages.

Different Types of Surge Protectors

Surge protectors come in two different forms. You are probably pretty familiar with a power strip surge protector, but there is another popular type of surge protector that is designed for your circuit breaker panel. When selecting a surge protector, make sure that you chose a higher level of joules. This is because you have more protection as you enter the higher numbers of joules.

Benefits of Surge Protection

When it come to surge protection, there are an abundance of benefits, including the following:

Additional Outlets – First off, if you use a power strip surge protector, you are provided with a number of additional outlets that you can use to plug in more devices and/or appliances into a single outlet. Saves Energy – Also with the power strip, you can save on energy usage. This is because there is an on/off switch on the power strip that allows you to switch off all plugged-in devices so that they are pulling electricity when they are not being used. Protects Devices – If there is a major storm in the area, then a surge protector (for the circuit or the power strip type) can help keep plugged-in devices and appliances from shorting out should there be an excessive amount of voltage being transmitted or a power surge, such as from a lightning strike. Increased Warranties – As a general rule, if you have your electronic items plugged into a surge protector and they are damaged despite the protection that the surge protector should have offered, your device or appliance will typically be replaced.

Smart technology is poised to take over the home appliance market. We already have smart thermostats, smart lighting and even smart refrigerators. If that's not enough for you, there are some new contenders on the market that allow you to turn any electrical device in the home into a smart item. The best part is that it's a simple DIY experience – no need to find an electrician to hook it up. It’s the smart plug, a small box that you plug into your home's outlets. From there, you can use your smart phone to control whatever light, television or other electronic appliance routed through the smart plug. Read on to learn more about these remarkable efficiency devices.

Control and Monitor Your Electronics

There are a variety of smart plug options on the market: The Satechi IQ Plug, the Belkin WeMo Insight Switch, the D-Link Wi-Fi Smart Plug and the Valta Starter Kit, among others. The cost and functionality of the different brands vary, but they all operate on a similar principle – allowing you to set schedules and remotely control whatever device you choose.

The smart plugs connect to your phone via Bluetooth or wireless Internet, so you can switch them on or off from anywhere in the home – or even from the other side of the country if you have an internet-optimized model. You can also program schedules so the plug automatically activates an appliance at appointed times – turning a coffee maker on first thing in the morning, for example, or switching on a space heater before you go to bed in a chilly part of the house.

Retro Meets Modern

The upshot is that there's no need to wait for cutting-edge smart devices to come out to keep your home on the cutting edge of technology. Imagine impressing your neighbor by demonstrating the new smart functionality of a retro 1950s television, or your old Victrola vinyl player.

Smart plugs also monitor how much electricity a given device uses and when, so you can make informed choices about increasing your energy efficiency though disaggregation, breaking it down appliance by appliance. You can also save energy by using the smart plug to turn off the power to devices when you aren't actively using them, preventing your electricity bills from skyrocketing due to always-on settings or “energy vampires.”

Savings and Control All at Once

If you have additional questions about smart plugs and how they work, find an electrician who can show you their utility and functionality. With surprisingly little effort, you can harness their power to save energy and control devices all throughout your home.

By: Jason Lee

Halloween is over which means the holidays are officially here. That means the relatives are on their way and you’ll be using your large appliances more often causing your electric bill to look scary long after Halloween has ended. Don’t let the increase in relative visits and vampire electric devices drive up the electric bill.

To keep the electric bill down, remember to only use the dishwasher when it is full. Running the dishwasher when it is only half full will amount to a lot more energy consumption.

Items like washers and dryers are guilty of consuming more energy during the holidays too. Washing clothes in cold water and setting the dryer on low heat will help in reducing the electric bill.

Knowing when to say goodbye to your old system is another way to save on energy. Older appliances run up the electric bill. If you have an appliance that is over 10 years old, consider replacing it with a newer, energy efficient model.      

It is also a good idea to have all large household appliances connected to their own dedicated circuit. To many of these large appliances operating at the same time on the same circuit can cause a blown fuse or a tripped breaker. A dedicated circuit for each large electrical household appliance will keep this from happening.

Lastly, don’t let your everyday electrical devices like laptops, cell phones or tablets get greedy and hog the power outlets. Only charge these items when they need it.                                                     

You’ll have enough to worry about as the holidays set in. Take the electric bill off the list by doing these simple energy savings tips from Mr. Electric.

Custom Electrical Services was recently voted for first place for Urbandale and Johnston area as best electrician!  The pole was taken by USA Today Best, and was presented by the Des Moines Register.  The voting is segmented into different areas by city.  Not all areas have the polls closed as of date.  The Urbandale and Johnston closed on September 27th, 2016.  The Des Moines metro voting closes on October 11th, 2016.  Custom Electrical Services would like to thank all the Urbandale and Johnston residence who took the time to vote.  We are proud to serve the Urbandale and Johnston area 24 / 7 as well as all of central Iowa!

We take pride in our work.  Our track record supports this.  Our electricians are not only licensed.  They receive special training that gives them superior customer service skills compared to other electricians.  We work hard to provide the best customer service experience possible.  Our electricians understand that your home is your castle.  They show respect for you and your property.  We are not your typical electrician that comes out and says your project is going to cost X.  We take the time to evaluate your entire electrical system as well as perform our full page safety inspection.  This provides a TON of added value to our service.  When is the last time someone took your panel cover off and inspected all your connections?  Most customers say not since I have lived here!  Electrical connections can loosen over time.  Wiring can expand and retract as loads fluctuate on the circuits, this expansion and loosen the connections inside your panel or breaker box.  Loose connections can leave to excessive arching and can cause fires.

Who are you letting into your home?  Our electricians receive an extensive background check.  We are not going to send a criminal into your home.  We realize the delicate nature of having strangers come into your home.  While you may not personally know the electrician you can rest assured we do!  Our background checked electricians are team members, not sub contractors.  We employee them full time and work one on one with them on a daily basis.  We work with them to develop the best customer experience possible.  We want you to feel comfortable with having our trained service technician in your home so you can be just as comfortable as we are with them.

In addition to a 3rd party background check our electricians receive drug testing.  You would not a person on drugs drive your kids to school!  So you defiantly don’t want an electrician on drugs performing wiring in your home!  Are drug tested and background checked electricians were the seal of safety.  This seal is worn with pride and taken very seriously.  When you see the seal of safety on our electricians uniform you know that you are working with a safe professional.