There’s a lot of scary information floating around when a discussion regarding electricity is at hand. Some of it is very valid, and some might be considered a bit of an exaggeration. But one area we really like to nail home is the dangers of a power surge. These are frighteningly common, and present very real danger to both you, and to your electronics. Protect yourselves (and your investments!) by learning how to prevent surges, and how to mitigate the possible threat they pose. 

Generally speaking, power is always “surging” to a minor degree. Every time a machine kicks on, or you flip a switch, the course and amount of power in your home fluctuates slightly. But more specifically, what we call a power surge is a dramatic and large spike in the current of your home.

This spike is exceedingly brief (somewhere in the neighborhood of a thousandth of a second), but can carry some real risk. More often it carries a risk to your possessions than your person, but you put a lot of money into your investments. Protect them!

Protecting your home from surges is actually pretty simple. It just takes a little preparation, a minor investment and a little bit of your (or our!) time:

You probably noted how adamant we were about that last one. So what’s the big deal? We could note a bunch of anecdotes about how a friend of a friend regretted not getting one, but let’s stick to the facts. Like we said, surges happen all of the time. Most of these are caused just by the general goings-on of a household. Whole home surge protection is hands down the number one most effective method of keeping you and your home safe.

Without getting too technical, a whole home electrical surge protection system policies and assists in maintaining proper, safe currents in your home. Do you have to have one in your home? Not really, they aren’t code yet. Should you get one? Absolutely. Surges can cost you huge money, and whole home protection is a very cost-efficient safety measure.

Want to learn more about how the expert electricians at Kolb can help you and your home stay safe? Contact our team today!

Don’t sweat the small stuff; Change it up, lighten your load and keep cool this summer with innovative and energy-efficient light source solutions and state-of-the-art ceiling fans and free standing fans.

1.  Stop baking in your kitchen!  Get rid of old incandescent and hot halogen bulbs.  Replace with cooler CFL’s (compact fluorescents) or LED’s (light-emitting diodes) in recessed and overhead fixtures. CFLs and LEDs** consume at least 75% less energy and emit 90% less heat.  Relamping with cooler bulbs will make a major difference in work areas of the home such as kitchens where oven, cook-top and dishwasher usage emit a great deal of heat.  Laundry rooms, too, can heat up pretty quickly when machines are in use, so update your illumination with cooler lamps. Also, switching to cooler bulbs in offices and hobby/work areas will vastly improve your ability to concentrate and keep cool.

2.  Shield yourself from sun streaming in through windows. Close the shades and curtains during peak daylight hours to keep the sun from fading your fine fabrics and overheating your rooms.

3.  Conserve energy and do not leave lights on haphazardly.  Consider automated heat and motion sensors to conveniently turn lights on and off.  Dimming ambient light sources adds an extra cool down option and helps save energy.  Brilliant and stylish cool new switches, automated fan and lighting controls provide the utmost in sophistication and design to revamp your home this summer!

4.  Opt for task light, and limit usage of general and accent light sources.  Task light includes focused reading lamps, uni-directional and adjustable recessed or track lights over work areas, and security lighting for safe navigation.  Although accent lamps enhance the beauty of your environment, save them for the times when you are entertaining or showcasing your home.

5. Beautify your environment and bask in the comfort of ceiling fans, wall fans and free-standing fans. Save on air-conditioning bills and keep cool by employing energy-efficient fans in rooms that are used most frequently.

♦When the air temperature is 78 degrees, your body will feel as if it is 72 degrees if you are seated under a ceiling fan operating at a low speed. Plentiful cooling options include innovations from Casablanca, Fanimation, Hunter, Kichler and Savoy House.

♦Purchase lamps, light fixtures and fans from a reputable dealer.  Top quality LED and CFL lamps are engineered to last and provide pleasant illumination.  Cheaper LED and CFL lamps may contain substandard elements; they may burn out prematurely and  illumination effects may be less pleasing. The best ceiling fans are engineered with motors that are guaranteed to last and work flawlessly for a lifetime of comfort.

Lighten Up, Cool Down and Revel in Summer 2013!

Bring on the summer heat, and power up the latest in sophisticated design and energy-saving innovation.  Pairing ceiling fans and air conditioners set at low fan settings offers the ultimate in comfort and energy-savings.

1.  ENERGY STARtm-rated fans:

2. The greater the angle of the blade, the more air circulation. Fan blade brackets should be positioned so the blades form a 12-15 degree angle for optimal circulation.

3.  The heart of every ceiling fan is the motor. Motors equipped with heavy-duty windings and sealed bearings that are permanently lubricated should work flawlessly for long periods of time.  Check out motor warranty information when comparing ceiling fans.

4.  A typical ceiling fan weighs between 15 and 50 pounds when fully assembled.  While many junction boxes may support that weight, a fan in operation exerts additional stresses. Be sure to upgrade to a proper junction box when replacing a light fixture with a ceiling fan.

5.  American Lighting Association (ALA)-member showrooms offer customizable fan products—decorator finishes, unique options such as hand-carved blades, custom light fixtures, ceiling medallions, and control systems, as well as installation tips and servicing advice.

Check out the latest energy-efficient products to keep you cool for the dog days of August….

–Energy-efficient and “cool” new bulbs from Bulbrite Industries* include the LED G5 dimmable Omni-Directional Series with GU 24 base options and 5-Watt chandelier bulbs.

*Bulbrite offers top quality lamps from novelty colors, fluorescent, halogen, and krypton/xenon to outstanding award winning LEDs and CFLs.  Enjoy all the benefits of LED, CFL and energy-efficient incandescent light sources from Bulbrite.

From Lite Source:  LS-21680 “Rubik” Energy Smart LED lamp

Multimax ™ by Fanimation, Energy-Star rated and available in 2, 3 or 4 blade options.

— The Sleep Fan Standing Floor Fan by Savoy House, available in Cherrywood, English Bronze, Satin Nickel and Wrought Iron Black; UL-listed for damp locations, comes with a independent volume control to adjust sound according to sleep preference—the lowered frequency red noise has proven to promote better sleep*.

Over 50 million people sleep with some kind of fan device for the soothing tone and the air circulation they provide. –David Furnace of Savoy House

Utilizing “red noise” * and a revolutionary volume control, the Sleep Fan delivers a soothing tone to lull you to sleep, while the gentle cooling system keeps you comfortable throughout the night.

*Studies show that “red” noise delivers low tones with the absence of high frequencies to induce a more soothing, deeper sleep than white noise.

The seasons are finally beginning to shift, bringing us (somewhat) cooler weather and a few unique activities. As we settle into fall, our experts at Hoffman Electrical would like to take a moment to clue you in on some potential electrical dangers unique to the season.

To our team, the only thing more important than our service is your safety! Electrical appliances and tools are indispensable these days, but without the proper care, understanding, and preparation, you could be looking at some serious injuries. To avoid risks and keep your home safe, keep up with these safety notes!

These tips and points are really quick and simple, so don’t worry about some involved and frustrating nonsense. For the most part, it’s all about being prepared and staying wary of potential threats:

This week, I participated in a weekly twitter chat calledTweetChat, with whom I have no affiliation but do use) Wednesdays at 2 p.m. EST and use the hashtag #KBTribeChat. Information about the interesting conversation. One of the questions was about using lighting to personal kitchens and baths. Of course, this got me very excited. I inadvertently learned that Twitter is great if you have a little that you kind of want to say. It’s terrible when you have a LOT that you REALLY want to say. That 140 character limit becomes a cruel, tyrannical constraint. So I thought to myself: You’ll just have to wait until you get back home to the blog, where you can write actual paragraphs, to answer this question. Ahhh. It feels good now to have a little room to stretch out.

So, how can you use lighting to personalize a space? Here are 4 things to keep in mind.

1) Fixture and Light Source