image: dedeking.com for IKEA

Take the stress out of getting dressed in the morning and update your closet lighting design.  See colors more vividly and surround yourself in flattering illumination with the latest closet lighting tips.  Whether you are building a new closet or updating an existing one, there are specific rules for safely and effectively lighting this valuable space.

The options abound in closet design from choosing the number of shelves and drawers to the dimensions of hanging space and shoe storage.  Some closets may serve as dressing rooms with areas for makeup application, as well.  Providing sufficient lighting is tantamount to making the best use of your space; for all that planning is wasted if you cannot see well enough to distinguish a black sock from a navy blue one.

1. When using surface-mounted incandescent or LED(light emitting diode) luminaires within an enclosed light source, be sure to install fixtures at least 12 inches from all storage areas.  If opting for a single surface-mounted light fixture, size the fixture to allow for a clearance of 18-24 inches from the wall. Usually one centrally located surface-mounted fixture will be sufficient to illuminate a standard size closet.

2. For surface-mounted or recessed fluorescent light fixtures, a minimum clearance of 6 inches between the light source and storage space is required.  LED and fluorescent light fixtures run cooler than incandescent, so they are the top choice in closet lighting design.

3.  When choosing surface-mounted or recessed LED light fixtures, go for top quality luminaires and buy from a reputable dealer.  LED lighting may cost a bit more, but the energy-savings, maintenance-free operation and safety features of LED will prove to be well worth the investment.

Come check out our booth at The Iowa Home Show January 15-17 at the Iowa State Fairgrounds! Featuring on Saturday country music artist Matt Snook!  And seminars with Design Star Winner Jennifer Bertrand both Saturday and Sunday!  You will also be able to tour 2 complete homes!  Custom Electrical Services at The Iowa Home Show!  Friday 1-7 , Saturday 10-7 , Sunday 11-4.

Please come out and see all the vendors and stop at the Custom Electrical Services booth.  Custom Electrical Services at the Iowa Home Show will have a variety items on display.  Check out the latest LED options for your home.  Inquire about a whole house backup generator.  Upgrade some electrical devices and more!  Please print the coupon photo and enjoy a complementary buy 1 get 1 free entry coupon!

Of course you will want to check out the Custom Electrical Services booth at The Iowa Home Show, there will also be a large variety of vendors. Ranging from general contractors, remodeling contractors, flooring and tile vendors, countertop vendors and more!  If you coming for ideas, trying to find a contractor, or just looking for something to do.  Please come out and say hi!

Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!