If you are planning to start working out of home, it’s crucial that you have a designated work space. The best way to create a home office work area that’s productive and functional is to update your home office wiring. Turning that spare bedroom or a new room over the garage or even an extension into a home office is something that you would have to plan well.

Even the simplest of work spaces have some or the other electrical equipment and appliances and you would need appropriate electrical wiring, powerpoints, and circuits and plug points etc. for it. Aside from this, you would require Internet connectivity as well. Most homes have Wi-Fi, and even if all your office equipment like the PC, printers, scanners, phones and tablets are Wi-Fi enabled, it’s best to have a hardwired Ethernet connection in your home office.

That increases the reliability of the service and you won’t be inconvenienced due to an erratic Internet connection. While it may seem like a very simple job, the fact is that installing home office wiring isn’t an easy job and has to be done with care.

Electrical issues have a way of cropping up all of a sudden. At that point of time, the only thing on your mind is that you should be able to contact an electrician who will deal with the issue without delay. If you look online, you will find that Sydney has a large number of electrical companies, big and small and you may feel that identifying a good electrician shouldn’t be much of a challenge.

This could be no further from the truth. There’s much more to zeroing-in on the right electrical contractor that than. As a matter of fact, if you aren’t too particular about who you are hiring for the job that can easily lead to a major fire break-out on your property. This is something you want to avoid under all circumstances. The very first things to take into consideration are:

It’s common knowledge that you would need an electrician to install/ replace/repair/maintain electrical systems. In our country, you are legally permitted to replace light bulbs and operate electrical appliances in just the manner they are designed to be operated. Apart from that, all electrical jobs should be handled by a certified and insured electrician and this can include:

The rule of thumb is that even if you feel a particular job is very minor and you know exactly what you’re doing, it’s important that you call an electrician. It’s vital to understand that any type of DIY electrical work can be extremely dangerous – it can result in fire, damage, injury as well as death. Here are the things you should be looking for when you are choosing an electrical contractor:

We at Allround Electrical are licensed and insured electrical contractors; we can rectify all types of electrical faults and provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

We’re not saying anything new by talking about how awesome our kids can be. No parent would doubt for even a minute that theirs is one of the biggest parts of their lives. They also wouldn’t doubt that kids are inquisitive, often to a fault. And with a home full of electronics, outlets, and appliances, it can be hard to feel like your kids are as safe as you want them to be.

Looking for the best ways to babyproof for your child or newcomer? The experts at Hoffman Electrical are here to help! Safety is our absolute top priority, and we want to ensure our clients get all of the best info possible to keep their Tampa home and family safe.

Of all of the dangers of electricity involving kids, outlets are probably the scariest, and for good reason. They’re right down there at a kid’s eye level, and they see us using them all of the time, so of course they’re going to be curious.