Early in the month, American Airlines Flight 1420 crashed near Little Rock, AK. This crash, along with a few others that took place soon before and after, inspired research into the deleterious effects of sleep deprivation on pilot safety.

3) A Whole, Whole Lot of Drug Money

In June 1999, George Bush announced his candidacy for the office of President of the United States of America. So much was about to change in our culture during the next 8 years.

5) Lord Stanley’s Cup

via www.moviesonline.ca6

In June 1999, Stephen King got hit by a car and was flung 14 feet while walking on the shoulder of a road in Maine. What’s the name of that Stephen King book about the car? Oh yeah, Christine. Any connection? You never know. But I’m sure King was thankful Kathy Bates didn’t find him after the accident.

7) The Weird Looking Predecessor of the MacBook Is Born

That mildly annoying yet overall charming goofball Austin Powers (Mike Myers’s colorful character) graced the cover of Rolling Stone in June 1999, exuberantly celebrating the sequel to the original Austin Powers blockbuster smash hit. Smashing, baby!

9) Adam Sandler Tones It Down a Little

The universe’s hippest couple, who, of course played in a rock band together, hit the popular scene with their debut album in June 1999. Then, they became insanely famous. And then, thirteen thousand two-piece rock bands, featuring only guitar and drums, were born. I think now, 15 years later, we are finally beginning to see the decline in that questionable trend. Bass matters, people.

11) That Kid from Walking Dead Was Born

Venus and Serena Williams, two twin females from a socioeconomically disadvantaged place, won the Grand Slam female doubles event for the first time. They were the second sister team to win a Grand Slam event since 1890. This is the kind of thing that just makes you smile. These are some of the best ever to play the sport.

13) MORE TENNIS!

Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

Ignoring a Tripped Breaker is Not a Good Idea

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

We’ve added linkable linear LED light fixtures to our home, commercial, and industrial product lines. The 5-foot fixtures can be used for anything from parking garage, warehouse, and tunnel lighting to supermarket, workbench, or home garage lighting. These LED fixtures can be easily connected with compatible Super Bright LEDs accessories to create a powerful, energy-efficient light series.

Using no more than 50 watts of power, the 4- and 5-foot linear LED lights emit 5,500 or 6,500 lumens, respectively, of bright natural white illumination. They’re designed to replace 250- or 320-watt fluorescent tube light fixtures but will last five times longer. These LED fixtures illuminate instantly and don’t emit the yellow-green hue that is typical of fluorescent lights.

The weatherproof linkable lights have sturdy aluminum housings and shatterproof polycarbonate lenses. They’re dust tight as well as water and impact resistant. Twenty 5-foot fixtures can be connected in a series, and up to 25 4-foot fixtures can be linked. Mounting brackets are included for wall or ceiling installation, and a suspension kit is also available.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

Surely you have seen electrical outlets your entire life… but do you know how they work? Their purpose is so important, it can actually save your life. If you read our article last week, you will understand how the electricity has already arrived at the outlet. Grounded electrical outlets then take the energy from your home electrical system and make it available. Here is more about what they are and how they work.

In Canada we have the three-prong outlet that you are familiar with. The outlet’s left hole is smaller and it is the “neutral” slot. The right hole is slightly larger and this is called “hot”. The bottom hole is the “ground”. The electricity flows in a loop, traveling from hot to neutral. This means when you plug your television in the electricity will flow from the hot slot of the outlet, into your television to power it, and then out to the neutral slot.

You have probably noticed that some appliances have only two prong plugs and some have three. This is because some appliances need to be grounded. Electricity always flows towards the ground, and when the electricity flows into your body and into the ground, you experience electrocution. Instead of a body potentially absorbing this current, the grounder redirects the electrical current traveling into the outlet so you will not be hurt. Items that have metal casings, such as televisions and computers, will have their metal cases attached to the grounder so that a current will not accidentally run throughout the case and shock you when you touch it.

When electricity becomes unbalanced in the electrical outlet, the outlet will “trip” and shut off the flow of electricity. For example, if an electronic device comes into contact with water, electricity will escape into the water. Once the outlet detects that less electricity is coming into the neutral slot than what should be, it will shut down. This safeguard protects users from potential harm.

By playing or tampering with an electrical outlet, you can get hurt or severely injured. It is important to use the appropriate equipment and follow manuals before plugging in electrical devices. If you need to make changes to your electrical system you should consult a professional first.