By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.

Imagine a future free from electricity bills. A home where you can maintain or improve your current levels of comfort, but one that is so efficient that it costs little to nothing to power its electrical work. Someday soon, this vision could become a reality, with a combination of renewable power generation and hyper-efficient technologies allowing Americans to enjoy elevated standards of living without placing a burden on their pocketbooks or the environment. Read on to learn more about the ultimate in energy-efficient homes.

Testing the Effectiveness of New Technology

One hotbed for innovation in efficient home construction is in the Pacific Northwest. A pilot program comprised of builders and utility companies is studying new homes built in Idaho, Montana, Oregon and Washington to discover how new technologies are functioning and which ones are most effective. The program is looking at homes that are at least 30 percent more efficient than required by local code and monitoring them for a year after they are built to ensure that their performance is living up to their promise.

Among the energy-saving features that are included in the new houses:

Filling in the Other Side of the Equation

Naturally, any modern home should also include features like LED lighting technology in lieu of incandescent bulbs and efficient Energy Star-rated appliances to keep the costs for your electrical work low. Add smart technology to the mix, which can automatically find extra savings, and you are looking at a historically low electrical bill.

Of course, it's extraordinarily rare to find an American household that gets by without electricity at all, so no matter how efficient you are, you'll still have some level of energy consumption to power your electrical work. That's where the other side of the equation comes in: personal, renewable power generation. Once you install solar panels or a wind turbine on your property, you can make your own power. Pair that with a good electricity storage option and you're well on your way to being free from electrical bills forever.

Conservation in Your Circuits and Wires

The nation hasn't realized its efficiency dreams yet, but we are well on our way. If you need electrical work in a new or existing home, call up a qualified residential electrician today.

Across the country this week students strapped on their backpacks and headed out for an exciting new year of school. But in the midst of that back-to-school glee, one word still strikes fear in both parents and students … Homework. What if there was a way to make the homework battle less stressful, dare I say enjoyable? Today I’m sharing five dread-busting homework stations with creative lighting that may actually make your student want to do homework.

The go-green movement has increased awareness of depleting natural resources and encourages people to reconsider personal energy usage. Many are considering switching from gasoline-powered transportation to electric cars. This switch would not only ensure the power needed to operate a car, but would also help save the environment and money. One of the primary concerns hindering people from switching to electric cars is the presence (or lack thereof) of charging stations across the nation. Although electric cars are growing in popularity within their niche, it is difficult for owners to feel confident with the availability of energy refill stations as they leave the comfort of their own home. In 2012, the number of publicly available charging stations surpassed 7,000. This number continues to grow as the popularity of electric cars steadily increases. Mr. Electric is here to encourage you that it is possible for you to live comfortably with an electric car! Check out our infographic on the availability of charging stations and their growth across the nation. 

Places such as grocery stores, shopping centers, gas stations and many others are adding EV stations to make them more readily available for electric car drivers. There are dozens of other reasons for you to consider an electric car, some of which include:

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

             In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!