As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

Twice a year (Spring and Fall), the High Point Market promises an array of new home furnishings, wall decor, lamps and lighting that define future trends and excite the imagination.  This year’s fall showing (October 18-23) did not disappoint!  Take a look at bright new styles, just in time for the holiday season.

More than 200 showrooms, filled with outstanding decor and illumination, offered a truly spectacular preview into the latest trends for the upcoming season.  Must-see items include modern table lamps from Van Teal, designer chandeliers from Crystorama and exclusive ceiling fixtures and outdoor lanterns “Made-in-America” from Framburg Lighting.

Van Teal’s “Burst” Collection

The “Burst” Collection from Van Teal features a must-see Gold Leaf and Artisteel finish.  See the entire collection from table lamps to island lights at 1800lighting.com.

Framburg Lighting’s “Brocatto” Collection

“Brocatto” from Framburg features lace and Italian glass for an exquisite presentation and dazzling illuminating effects.

Dynamic Collections from Libby Langdon Lighting for Crystorama

• The “Jennings” Collection

The “Jennings” collection features an artistic geometric in a Polished Nickel finish over White linen shades.

• The “Sylvan” Collection

The “Sylvan” collection features elegant chandeliers with a free-flowing design in Polished Nickel with linen shades.

Coming soon to 1800lighting.com…

“Timeless” table lamp from Currey and Company

Stay-tuned for more highlights from High Point coming soon to 1800lighting.com. Classic and modern table lamps, designer chandeliers and lighting fixtures made exclusively in America are this year’s big winners!

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

 In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!

A hefty amount of our readers here on the MyLEDLightingGuide’s official blog consists of facility managers (along with contractors, government employees, and other decision makers). This post is made specifically for the facility managers and building owners out there to help keep you up to date and fresh on the latest news and opportunities for you and your buildings.

This list of 14 blogs will consist of some popular and most likely already heard of publications, along with a few lesser known places that you still may find extremely interesting. Picking a few from this list is definitely the first step to keeping up to date and staying ahead with your work.

There will be a brief description along with a URL for each blog / magazine listed, and it should give you a good idea or not if that facility management resource will benefit you more-so or not than others listed here. Now, let’s get started with this list…

2. Buildings.com

Another very popular publication which covers a lot of useful topics and products that any building decision maker should be aware of to create a more efficient and overall better workplace. They also have many courses and webinar on topics like life cycle costs, energy management, lighting, security, and more.

4. Maintenance World

As the name suggests, this blog leans on the side of maintenance based topics. Although, they often talk about topics that are important to any facility manager, such as cooling an industrial sized area. That is just a glimpse of the type of stuff this blog publishes, so reading more on what they offer may be important to seeing if this blog is worth your time or not!

6. FM World

FM World seems to put a lot of their attention on news, but all are topics that are probably very relevant to you and your tasks as a FM. They also (like many other of these blogs on this list) offer many different white papers which carry tons of valuable information in them. Along with professional interviews, webinars, and other pieces of content they are very well rounded in the variety of things that they offer.

8. The Built Environment

They don’t only talk about the environment and green buildings, but surprisingly they publish a lot about facility managers and how to become a better one in general. You can thank Michel Theriault for this great resource, as he is the brains behind it all. He also offers services such as consulting and training for FM staff, so if a budget allows and you want to become a better FM; that’s always an option!

10. Building Automation Monthly

Phil Zito is the creator and sole person behind Building Automation Monthly. He writes about and educates on the topics solely regarding building automation systems. No time for reading? Phil offers a Podcast which covers many different great topics as well. So, next time you are driving or taking a flight you might want to listen in to his podcast!

12. The fmguru blog

Although this blog doesn’t seem to be updated as often as many others on this list; their past and current posts are a good read. They are definitely insightful and thought provoking on the tasks and purposes of a facility manager.

14. i-FM.net

Like their headline says, “if you’re in FM, you need to be on i-FM.” They offer tons of content through news, interviews, top 50 list of great and relevant companies, and overall great resources.

Missed any that you think is worthy of being added? Be sure to comment them down below, this list is always being updated!

Final Words

There you have it, 14 (and growing) facility manager blogs, magazines, and resources that will hopefully make you an informed, up to date, and more educated facility manager overall. Our #1 tip for you is to pick two or three from this list that really peak your interest, and make it a ritual to check in on them often for the latest content that they offer.

Again, if we missed one that you think should be added; feel free to comment it down below for consideration!

Want more of our topics for facility managers? Here are some: