If you are looking for a place to escape from life’s every day hustle and bustle,Look for IP (Ingress Protection) rated fixtures that are waterproof, meaning dust-tight and protected against long immersion in water, rather than simply “water safe” or “wet location safe” options.  Waterproof fixtures are meant to be submerged and will prevent water from entering them due to sealed assembly.  Take the precaution to ensure that your fixtures will meet all safety and application standards for an underwater environment prior to purchase or installation.

Ingress Protection (IP) ratings specify the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

An “X” can used for one of the digits if there is only one class of protection, i.e. IPX1 which addresses protection against vertically falling drops of water e.g. condensation.

IP First number – Protection against Solid Objects

IP Second number – Protection against Liquids

Voltage Requirements

When weighing your options on which type of fixture to choose, cost, convenience, and the size of your project are important. If one were to complete a large project for the grounds of a grand hotel, for example, line voltage (120V) would be the ideal option as vast distances may exist between the focal point and the fixture itself.

While it’s also true that standard incandescent bulbs can be found at virtually any hardware or household goods store, in an age where environmental awareness is important to daily life, technology and the public are moving in tandem towards different solutions. Since line voltage lighting consumes much more energy and will typically require the expertise of a licensed electrician, more homeowners are choosing low voltage (12V) options. Low voltage fixtures are notably the safer and less hazardous of the two choices, are often smaller, and easier to conceal within a natural landscape. They also have the added benefit of lower cost over time. Note that a transformer is required to convert to the lower voltage for fixtures which will be used underwater. You may also make use of photocells and timers to save on electricity consumption costs even further.

Let’s take a look at some examples of the different types of submersible low voltage products available today:

Low Voltage Halogen

This LED lights consume approximately 75% less power than incandescent units for the same amount of light output. This amounts to a sizeable savings over their life span. Moreover, standard underwater LED fixtures consume about 1/5 of the power as standard incandescent bulbs!

Besides energy savings, the nature of LED production makes them ideal for underwater applications. There are no bulbs to change as LED fixtures typically come in a permanently sealed housing. Sealed construction means underwater lights may be left in a permanent location with no concerns about extra cable allowances, or making provisions to change bulbs. They should, however, be accessible in order to clean the lenses during regular pond maintenance.

Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

We usually expect to find wiring troubles in old homes where the wires are made from out-of-date material that is no longer up to code. But electrical repair needs can crop up in the most modern homes: all it takes is a bit of shoddy installation or damage to a few connections and you can end up with wiring that malfunctions, leading to power loss or—in the worst case scenario—an electrical fire.

Do not attempt any repairs to your wiring yourself unless you are a trained electrician with access to pro-level tools. High-voltage shocks are something to take seriously. Pick up your phone instead and put in a call to your local electrician and arrange for repairs.

By: Kellie Pearson

The future looks bright here at Mr. Electric®, and we hope the same for you! As you are mentally preparing for the New Year ahead, maybe you are planning your goals and resolutions for personal development and improvement. This video by our president, Joel Worthington, is sure to motivate you to achieve them. We also want to encourage you to consider your home’s development and improvement, too!

When you think about your home’s electrical system, what can be improved? What can be replaced and updated? We have put together five tips to help you get started on getting your home’s electrical system in tip-top shape for the New Year. 

Although they initially cost higher, LED Energy Star qualified bulbs end up paying for themselves in energy savings in about 10 years. They use 75 percent less energy than incandescent bulbs and last 35 to 50 times longer. Plus, they offer more peace of mind since they emit very little heat, decreasing the threat of an electrical fire, and are much more durable, so they won’t shatter all over the floor. They’re also guaranteed for three years minimum, which is above and beyond the industry standard, so you’ll save on maintenance costs as well as energy costs. Basically, there’s no excuse not to get them!

Did you know that you’re technically supposed to do this every month? Not many consumers actually do this, but a new year is a great time to put this to practice and schedule it along with your other monthly home maintenance routines. You’ll find these outlets in moisture-prone areas such as the kitchen and bathroom as the current National Electrical Code requires. Simply press the test/reset button and make sure the outlets trip and resent correctly. If they are malfunctioning, call your local Mr. Electric to have them replaced to reduce electrocution risk.

Replacing the batteries should be done at least once a year, and both of the detectors should be tested monthly to ensure proper functionality. And speaking of replacing, how old are your detectors? Remember that smoke detectors need to be replaced every 10 years. Depending upon the model, older model carbon monoxide detectors should be replaced every three years, and the newer ones, every 5-6 years. Make safety a priority for your home and get this done!

Power surges can enter your home unexpectedly during a stormy night, a random power company disruption or operation of a heavy-duty electrical appliance. They destroy electronic devices in their path and at times cause fires as well. It is unfortunate when your Mac or PC dies, but even more so when your photos, documents, music and other personal content are lost along with it as well. To reduce damage from power surges, have a whole house surge protector installed by your local Mr. Electric at the panel and additionally multi-outlet power strip surge protection for delicate circuitry, telephone and cable lines. This will ensure both main zone as well as secondary zone surge protection to absorb any excess power that seeps through the primary protection.

This can be done in a variety of ways: turning lights out after you leave a room, unplugging and turning off electrical devices when not in use and ensuring lighting and appliances are Energy Star qualified. Perhaps you can create a friendly family competition to see who can use the least amount of electricity, or even consider looking into installing a solar energy system for your home. Whatever you choose to do, remember that you can also call your local Mr. Electric to perform an energy audit for your home to ensure its electrical system is operating at maximum efficiency.

We hope you find these tips helpful to make your home’s electrical system the best and brightest it can be, and we wish you a Happy New Year from all of us at Mr. Electric!