New rules will soon be in place to govern fossil fuel usage and cut carbon pollution coming from America's power plants. The Environmental Protection Agency proposed the plan last year, and it is expected to be finalized this summer. Most of the rules have to do with the generation of electricity, so it might not be obvious that the plan would have implications for the average consumer. As it turns out, the EPA plan could make a big difference in homeowners' utility bills – hopefully a positive one.

Reduction in Energy Bills

While many people fear that new clean energy rules will cause the retail price of electricity to skyrocket, experts are predicting otherwise. According to an analysis by the National Resources Defense Council, low and fixed-income households should actually see their utility bills fall by an average of 8 percent. In total, the group suggests that consumers could save as much as $37.4 billion on their electricity bills by 2020.

Why such a rosy picture? As the nation switches to more sustainable energy sources like wind, the costs of production will fall. Furthermore, since the fuel price for wind and solar is zero, consumers will be shielded from volatile prices of coal and natural gas, which can make electricity bills vary widely. What's more, the Clean Power Plan will promote investment in household energy efficiency to encourage families to reduce their own consumption.

A Boost to the Economy

Some think tanks are also predicting a boost to the economy as we transition to a cleaner energy grid, with jobs available to build and maintain the emerging infrastructure. People will be needed to work on windmills and solar installations, for example.

"The most important takeaway from our analysis is that, after accounting for the various ways in which the Clean Power Plan puts upward and downward pressure on employment, we find a net increase in jobs,” Industrial Economics Principal Jason Price said to UtilityDrive.com, forecasting a net gain of 74,000 jobs in 2020 and as many as 273,000 jobs by 2040.

Health and Climate Concerns

There should also be ancillary benefits to the EPA plan. Cutting down on fossil fuel emissions means less pollution in the air near ground level, too, so people should suffer from fewer related health problems. NRDC predicts that the change will prevent up to 6,600 premature deaths, 150,000 asthma attacks in children and 3,300 heart attacks.

In addition, the less carbon the nation burns, the less we accelerate climate change, which is poised to cause unpredictable but inevitably expensive disruptions in familiar weather patterns.

All in all, nobody knows for sure what will happen with the new EPA rules, since they haven't been finalized yet. However, if the experts' predictions are anywhere close to reality, Americans will be able to celebrate cheaper and more environmentally-friendly energy in the not-too-distant future.

One of the least understood terms in LED Lighting is efficacy, or in simpler terms, how efficient is the light. It is typically measure in lumens/watt. Today, efficacy is becoming more and more important because efficacy varies greatly from product to product. What the consumer needs to be wary of is that you should not be mislead into thinking that just because you are switching from HID or fluorescent to LED that you are getting the best savings available. You also need to look at how efficient the LED product is to maximize the savings.

Here is an example of how this works. Let’s look at a two USA Made competitors LED Retrofit Kit compared to our 4th generation LED kit. All three units are designed to replace 400W HID

From this table, you can see that all products produce over 13,000 lumens, with the MyLEDLightingGuide product producing the most at 14,528 total lumens. It also consumes the least amount of energy of the three units at 105 watts, compared to 130 and 135 watts. For the record, all three products come with a 10 year warranty on the head and a 5 year warranty on the driver. MyLEDLightingGuide also offers a 10 year warranty on the driver as an optional upgrade.

But what does this all mean in terms of saving you $’s. Let’s take a typical scenario. Let’s say these retrofits are installed in MyLEDLightingGuide 105W retrofit kit. Multiply this number over 10 years and by the number of fixtures you have to replace, and this is real dollars. And let’s not forget the MyLEDLightingGuide retrofit kit is also much brighter than the competitors products.

So efficacy is important. It saves you money. But a well designed kit will also produce more light. Just think, without efficacy we wouldn’t have as great of savings, nor would we have more light production from the same amount of power.

Efficacy is huge in the world of lighting, and it is only going to get better year by year. Technology improves, lights improve, and thus; efficacy improves. In 10 years, lights that will be made are probably going to be 5x improved then they are today. And since they are already super efficient today, just imagine that times 5. Now that is efficacy!

As a rule, the bottom of any hanging light should be at least 6’8″ off the ground – unless it’s over a table or island. When you have an 8′ ceiling, this doesn’t give you a whole lot of room to play. If you long for the grand impact of a decorative

A room with a single light fixture is depressing. Kick the shadows by adding multiple light sources. A few stylish flush-mount ceiling lights. Some table lamps. An accent light here or there. When you have multiple lights shining in different directions, the space will feel lighter and more open. Make sure to place ceiling lights at least 3′ from the wall, any closer and harsh shadows will make your ceiling seem lower. 

The average household in Virginia pays $125 per month for electricity, according to the U.S. Energy Information Association. In Maryland, that number is $136 per month and in DC, it’s around $90. For commercial properties, the figure is even higher. But at Kolb Electric, we know that there are simple steps you can take to lower your electric bill—and we’re going to share a few key tips.

1. Check for gaps in windows and doors. Perhaps the easiest thing you can do to reduce your energy usage, and thus your electric bill, is to check your home at the beginning of each season for gaps around the windows and doors. It’s important to do this every six months or so, since your home can settle and shift slightly over time. It only takes a small gap for energy to escape.

2. Turn down your water heater. The standard setting on most electric water heaters is 140 degrees. Turning the heat down to 120 degrees can save you $60 or more each year in water heating costs. Save more by replacing your water tank with a tankless system.

3. Repair leaky ducts. If your ducts have holes in them or if they have come partially unattached, then you’re paying to cool and heat air that is never getting to your living spaces.

4. Have your HVAC and electrical systems serviced annually. Keeping all electrical systems, as well as HVAC products, well-maintained can not only extend their lifespans and help ensure your safety, but can save you money on your electric (and gas) bill too. Your system has to work harder and use more energy to push through an accumulation of dirt and debris. Regular electrical maintenance can also prevent the need for costly repairs.

5. Check your electric meter against your monthly statement. It’s a good idea to get in the habit of checking your electric usage on the meter and comparing it to your statement. This allows you to easily determine whether your monthly energy bill is accurate and provides you with the information you need to monitor your usage so you can use electricity smarter in the future. Click here to learn how to read an electric meter.

At Kolb Electric, we don’t want you to pay any more than necessary for your electric usage. For more tips on how to reduce your electric bill and/or to schedule you annual service appointment today, call us at 877 287-1179. Our licensed electricians have been helping Mid-Atlantic homeowners with their electrical needs since 1925.

Custom Electrical Services offers affordable electrical solutions for your home.  They can handle any electrical project from the simple to the most lavish.  Recessed can lighting?  They can add modern lighting to provide accent lighting or general illumination.  Can lighting can be very neutral lighting providing general illumination without being noticed.  Have a piece of art or that favorite family photo you want to spot light?  Recessed lighting can be used to focus light onto the favorite picture.  New LED lighting options offer a low energy affordable solution.  LED lighting can reduce the amount of heat put off my traditional incandescent lighting.  LED recessed lighting can provide years of low cost general lighting as well.  [gravityform id=”2″ title=”true” description=”true”]