We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

Finding the right electrician to provide for your needs can be a frustrating experience. There are a lot of options out there and it can be hard to choose! But when you need service, you don’t want just anyone. You want the best. So how do you find the best electrical services in Tampa? Well, there are some important bits of information you should hunt down before you decide!

Since 1989 approximately 1 billion feet of CSST gas line or yellow gas line has been installed.  Nearby lighting strikes can cause an electrical surge and puncture the CSST line.  Bonding is considered electrical work and should only be performed by a qualified electrician.

In new construction we bond all gas lines.  Currently about 500,000 new homes per year have CSST gas line installed in them.  However, CSST gas line is considered safe when properly installed in your home.  Part of the installed properly guidelines refers to bonding your CSST gas line, your local electrician can do this for you.  If your home is more than two years old we recommended you have a licensed electrician check for proper gas line bonding.  Many real estate transactions and inspections require the CSST line to be bonded prior to the sale.   A good source of information on CSST lines can be found at CSSTSafety.com.

“CSST should NOT be confused with flexible gas appliance connectors – the product that joins a moveable appliance to your home or building’s gas supply line. The difference is flexible connectors attach directly to the moveable appliance from the wall or floor. CSST is usually routed beneath, through and alongside floor joists in your basement, inside interior wall cavities and on top of ceiling joists in attic spaces.” CSST Safety.com

If you would like more information or to check to see if your CSST line is properly bonded please feel free to Contact us anytime!  We bond CSST gas lines in the Des Moines area and surrounding communities.