By Clarissa Allison | December 2nd, 2016

When it comes to choosing which manufacturers to represent, several things are taken into consideration. Longevity, reputation, variety of selection, and response time are all paramount. This week LouieLighting.com would like to introduce a manufacturing partner we are proud to showcase: RAB Lighting.

RAB Lighting has been a leading manufacturer of sustainable indoor and outdoor lighting fixtures since 1946. Their reputation is grounded in the finest manufacturing, supported by a growing infrastructure complete with sophisticated facilities and engineering capabilities. Known for its cutting edge product design, quality, and customer support, the company operates the 6 acre corporate headquarters and manufacturing facilities in Northvale, New Jersey as well as locations in China, Taiwan and Malaysia, from where RAB is serving a constantly growing lighting market.

In 2002, RAB Lighting provided the Vaporproof fixtures which formed the Olympic Rings – this project resulted in the largest sign in history. What a feat! Accomplishments such as these demonstrate the pride and craftsmanship central to the brand.

Smoke alarms are an important safety measure to protect your family and home from fire. You should have at least one installed on every floor. Unfortunately, a smoke detector beeping intermittently is a major irritant, disturbing your sleep and alarming your children and pets.

However, you should never permanently disconnect a smoke alarm to stop it from beeping. Instead, figure out the cause behind a beeping smoke detector and work to solve the problem. We can help!

If you just cleaned your fire alarm and replaced the battery yet the intermittent beeping continues, this could be a sign it’s time for a smoke detector replacement. These devices typically only last 8 to 10 years. If you’re not sure how old your smoke detector is, remove it from the wall or ceiling and check the manufacturing date on the reverse side to see if old age could be the cause of the malfunction.

Almost everything nowadays operates on electricity. The modern conveniences that drive our world depend on electricity. Without a constant supply, our world grinds to a halt, as massive blackouts have proven in the past. Electricity has two forms in modern electronics: AC and DC.

AC (alternating current), is most frequently used in devices that require high amounts of power to operate.

DC (direct current), is more commonly found in devices requiring smaller amounts of power to operate.

DC was the original electricity that was created by Thomas Edison. This style of electricity sends a current in only a single direction, from a power source and to the power source again in a loop. Today, DC is used to power electronics that require batteries. Any device in your home that uses batteries uses DC current. Interesting to note, if your battery is plugged into the power supply to recharge, it transforms AC current into DC.

Direct current is also used in manufacturing situations where electricity is generated on site for personal use. Factories and mills that require vast amounts of energy often create their own DC current to power their machinery. Most commonly, DC is found in steel mills, aluminum production, and is used to power mass transportation in large urban centers in the form of electric streetcars.

AC power is easier to generate, which is why we use it as our standard electricity nowadays. The alternating current design allows energy to flow in both directions, making electricity easier to create and use in society. Regardless of where the current is moving, it is always moving in both directions at once. This results in current being present at every point in the power grid at every time as long as the connection to the generation unit is intact. The power that comes from the power plants, down the lines to our homes, is always AC in nature, thanks to the way our modern power grid is set up.

The power grid operates by creating AC current and sending it down the power lines. This current can be at whatever intensity the power company chooses.

Frequently, the electricity coming from these lines is far too powerful to be used in our homes. The transformers that we see on power poles transform the electricity from its high-powered state into something that our homes can use. Without the transformers, we wouldn’t be able to use the power that our society depends on.

Regardless of the style that we use in our devices and our homes, electricity plays an important role in society. Without both AC and DC electricity, we wouldn’t have those things that make modern life as comfortable as it is.

Electricity is something we can’t manage without, but it’s crucial to take due care while using it. When it comes to electrical safety, you can never be too careful, and it’s important to ensure that the electrical systems, wiring, fixtures and fittings in your home have been installed by a licensed and insured electrician.

The same level of care has to be maintained when you are using any electrical appliance and you must ensure that you don’t overload the system while operating any of them. It’s very common for people to use extension cords in their homes and not many property owners feel these electrical accessories should be included in their safety checklist.

If an extension cord is used continuously under the wrong conditions, it can potentially lead to electrical shock or even an electrical fire. We have put together a few extension cord safety tips:

The other important thing you should keep in mind is that you should never join two or more extension cords together. This can be very dangerous because that can cause a drop in the voltage in the cords; this reduces the effectiveness of the circuit breakers and safety switches in your home; in turn, this can result in an overload.

If this occurs, the strength of the actual current that’s flowing in the cords can damage appliances which can create a fire hazard & potentially cause electrocution. While an extension cord can be quite helpful in effectively delivering power to points where you need it; never forget that using an extension cord is just a temporary measure and shouldn’t be used to provide permanent power.

Some would argue and say that they have been using extension cords for years without any trouble; however, that doesn’t really mean it won’t compromise the electrical safety in your home, when you plug it in the next time. If you find you are using too many extension cords around your home, it’s an indication that there aren’t enough power outlets in your home, to cover your needs.

It’s best to call in an electrician, discuss your electrical requirements and get them to assess whether the existing installations meet them. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263