LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

We’ve added a new line of 

Using 316 marine-grade stainless steel and polycarbonate lenses, the 60-, 120-, and 180-watt LED boat lights resist damage from shock and vibration. Hardware is included for surface-mounting on a variety of transom types, and the LED lights must be completely submerged to function properly. To prevent failure due to out-of-water use, a built-in temperature protection circuit powers the lights off if they reach 194 degrees Fahrenheit. The underwater boat lights operate within a wide 9-32V DC range and are designed to last 50,000 hours.

There was a time not too long ago when gas and electricity costs weren’t really a topic of concern at all. Keeping in view expenses such as mortgage payments, insurance etc, energy bills faded in comparison. However, that is no longer the case today. Energy costs have become a major concern for property owners and the need of the hour is for energy – efficient solutions to be incorporated into the home.

And there is no dearth of these types of solutions. Ranging from LED bulbs, use of solar energy, smart lighting, optimum insulation, use of energy-efficient building materials, switching from standard ovens to convection ovens, people are trying everything in the book to coax their energy bills to drop a little bit. While all these measures are definitely helpful in bringing down energy consumption, there is one more thing consumers can do to keep a handle on their energy bills- use smart lighting schedules!

Energy providers in Australia charge consumers a variety of rates; this is based on the type of meter in the house and the manner in which energy is used in peak & off-peak periods. There is no standard rule here as different retailers maintain different energy rates. The one way to get a much reduced rate is to opt for a long-term energy contract. It’s important to shop around a bit as the difference in rates between providers can be significant.

Off peak times are those when businesses and homes typically use less electricity. The off peak time is dependent on your meter type and location; however, these are typically on weekends and/or at night. When consumers use electricity in busy peak times, it burdens the electricity networks in the country. It’s also why energy usage in the off-peak hours is charged at much lower rates. This is the way consumers are encouraged to use power outside busy hours.

There is another definition of off-peak rates. This can refer to the electricity used by a particular appliance on a dedicated circuit. For instance the electric hot water system in your house could be on a separate circuit and will be billed separately, on the off peak rates your service provider is offering. It’s possible to leverage this off-peak rate to reduce energy costs in your home. You can use interval metering or off-peak hot water to benefit from these lower rates at set times of the day and the weekends.

If you are considering using smart scheduling, it’s important that you contact your energy provider and find out if it’s something they accommodate and what you are required to do. For advice on smart metering and other electrical installation services, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Depending on what sparked your need for an electrical repair, you might be wondering if you can DIY a solution or whether you need to call a professional. If the fix just means changing a lightbulb or resetting the breaker, sure, go ahead! However, if your problem requires potentially exposing yourself to a live current, the job is probably best left to an electrical repair service. There’s a reason electricians are rigorously trained and licensed — the job can be dangerous.

Do you oftenHere are the signs you need an electrician

At the least, making a mistake while doing DIY electrical repairs could mean subjecting yourself to the discomfort of an electric shock … at the worst, fatal electrocution. Even if you do manage to get the job done, poor wiring or improper installation could also create a fire hazard down the line. There are some jobs it just makes sense to pay someone else to do.