If you want to achieve flexibility of loading different electrical appliances in your home, implement the following approaches. The electrical conduits practices recommended here meet NEC guidelines guaranteeing proper load growth for both commercial and residential buildings.

If you expect the load on your house, office, establishments, or other buildings to increase in future, consider using at least 12 AWG conductors. Ensure that they have protection of 20-amp circuit breakers and are designed with a 15-amp load standard each.

In addition, consider implementing these measures on wires and cables to increase the optimal performance of your circuit conductors.

To allow the normal length of lamp cords and other wire cables, the NEC Code recommends more than six feet of distance between the point on a wall and an appliance receptacle. In applications such as kitchen countertops, electricians should wire receptacle outlets some twelve feet or four feet apart.

The biggest challenge here is the difficulty in predicting how items such as furniture in your house will be arranged. Additionally, there may be an inadequate number of outlets at various locations. Evidence for this can be seen in the outlet power strips that today’s equipment use.

In locations where you can expect a huge load, such as computer workstations, offices, and home entertainment, the use of Quadruplex receptacles is an ideal solution. Reducing the number of receptacles that a single circuit uses will limit the installation and use of sensitive equipment. It also positively affects circuit conductors, voltage drop, chance of interaction, and reduces the likelihood of harmonics accumulating to harmful levels.

If your home has a large kitchen and multiple bathrooms, you need additional circuits that go beyond the minimums of the NEC Code. This effectively maintains the high-capacity appliances that characterize these rooms.

In addition, limit the number of use receptacles per circuit. For example, a 15-amp circuit can run 1800 Volt Amps when working at 100 per cent rate. While NEC recommends using circuits at 80 per cent rate, this translates to 1440 Volt Amps.

For some reasons, NEC requires a high number of circuits for use in most commercial and residential buildings. The Code recommends that sensitive electrical appliances, high-capacity loads, and equipment that cause poor quality of power obtain power from individual circuits. This separation eliminates the interference with equipment on a common circuit.

Where individual branch circuits are installed, the harmonicas generated in other circuits are shielded from coming in contact with sensitive equipment. In addition, this prevents the high neutral currents from sensitive electronic appliances to those circuits, effectively eliminating the likelihood of incorrect operation and voltage drop.

Raceways provide the ease of upgrading conductors efficiently and give electricians the freedom to pull conductors through a building. Therefore, let spare raceways and safety electrical material is installed during construction to allow an easy installation of conductors in the future.

As appliances and equipment advance over time, the lighting and switching mechanisms in your house or building should anticipate future modifications. For example, motion detectors and other electronic lighting devices require a small standby current to remain in their optimal state.

Therefore, install the following solutions for safety switches and lighting appliances right from building construction.

These applications are necessary if you want to reduce the load on the circuits in your house. If you have not implemented them yet, call a reputable electrician today to overhaul the electrical conduits. While this protects the electrical wiring from possible hazards, it also safeguards the assets in your house or building.

GE, Osram, Sylvania and Philips are some of the big names of lighting business. Look at how the market for modern energy efficient lamps is developing and one wonders if the lighting Industry is going the way the computer industry did.

When computers burst on to the scene, they redefined efficiency measures. A new computer was a considerable investment but it more than made up for its cost by increasing productivity or by reducing cost. Companies using computers could also use this fact as a branding tool – defining themselves as progressive corporations.

The demand for energy efficient lighting products has meant that incandescent bulbs now belong in a museum and not in homes and offices. LED lighting technology is quickly decimating old records of energy efficiency and long service life. The improvement in this technology render peak light output data obsolete every year. Energy efficient LED bulbs and tubes cost more up front but like computers more than make up for their cost through energy savings, lower maintenance costs and green branding.

This is how the computer business unfolded.

Given its strong technological capabilities, IBM was once the undisputed leader in computers. Then IBM made a decision that some call a strategic blunder. They outsourced their software development to Microsoft, which was then a small start up. Chip development became the forte of Intel. Soon IBM clones flooded the market. It was possible to buy chips, software and other components from different manufacturers and assemble them. These conditions created a fertile ground for entrepreneurs and many computer assembling and selling businesses came up quickly. Simultaneously, a host of software companies came up for developing specialized products like desktop publishing and anti-virus programs. Consumers benefited but IBM lost its dominance of the computer market.

Look at what is happening in the lighting industry.

This is how the LED bulb you love reaches your light fixture.

1.       Scientists in Universities, government funded labs and private companies work to break new ground in light output and longevity. They experiment with new semiconductor materials and manufacturing technologies to produce the best product at the lowest price.

2.       Using the knowledge generated in the labs, specialized companies like CREE produce High luminous output LEDs.

3.       Companies like ‘Seesmart’ excelling in fixture design assemble high quality LEDs into fixtures of suitable wattage and light output. They ensure that operating temperatures are low and light spread is even by marrying the best LEDs, optical diffusers and heat management systems. They also ensure that the lights are in accordance with UL testing guidelines.

4.       MyLEDLightingGuide understands LED lighting and brings these super efficient lights to buyers. We sample lights from multiple manufacturers and select those that make for the best price performance combination.

5.       Our secure e-commerce platform enables consumers to choose the product best suited to their needs from the comfort and safety of their homes and offices. They do not need to go through tons of brochures printed on paper or drive down to retail outlets. The chosen product is shipped to the buyer and helps him improve the performance of his/ her business or reduce home energy bills.

As with computers, new tech companies are coming up with pioneering technological products for remote lighting management and intelligent lighting controls. The parallels are too many and the business will probably develop as the computer industry did – adding efficiencies, earning foreign exchange and establishing world leading best practices in the bargain.

That LED light bulb manufacturers shall be the stalwarts of the new age of eco-friendly lighting is beyond doubt. GE, Sylvania, Phillips, Osram and other big names of the lighting industry are trying their hand at marketing LED lights. However, these big name lighting companies are going to face a lot of competition from smaller manufacturers and customer focused retailers like MyLEDLightingGuide. The reach of our E-commerce platform renders their distribution muscle redundant negating one the main advantages enjoyed by these big players. Intelligent customers do not choose brand name products blindly. Instead they like to see, study, analyze and understand evidence about the benefits of the product they have chosen to invest their money in. This is where our ROI calculator, data analysis and knowledge articles prove to be of great value.

The world of lighting seems ready for democratization.