We had a call today from a customer. They were looking to retrofit their existing fixtures with LED. The competitor did a quote for them, and had recommended LED Post Tops as the retrofit bulb of choice for them. And this would have been a terrific solution if all their fixtures were acorn style pole mounted lights. But they weren’t, they were high bays, parking lot lights and show room lights. Yes. They are LED. Yes. They will save you money. But if you are trying to plow a field, you don’t buy a Porsche. You buy a tractor. The right vehicle for the job. And the same applies to LED.

First, let’s make sure we set the score right. We sell both. We sell LED Post Tops and we sell LED Retrofit Kits. We are not Post Top biased or Retrofit Kit biased. We even sell new fixtures. We have no biases! We want what is right for you!

contact our team and we’ll get back to you.

There are many projects you can take on yourself, or hire a general handyman to do, in your home. However, your commercial space or business is a whole different story. When you need work done there, you run the risk of creating a business interruption, which could be detrimental to your bottom line. Therefore, it’s essential that you only trust a professional for your commercial electrical work—no matter what the job is.

You may have a general handyman for your commercial space, or perhaps you have a local electrician you trust for your residential projects. However, what you may not have in either of these scenarios is an electrician with extensive experience and training in the commercial space. This is just one of many reasons you should make sure to hire a professional commercial electrician. Keep reading for more.

The equipment and skill involved in commercial electrical jobs will range depending on the type of commercial space we’re working on—whether it’s a restaurant or an industrial office space. No matter what your needs, however, we can handle them. Trusting electricians who are specifically trained in the commercial space is far more cost-effective than trusting any electrician off the street.

Experts Convey Trends in Lighting

The top trend in decorative lighting has little to do with style, shape or shade choices. Instead, it focuses on the new mindset of the consumer.

“People have realized you’re not buying just a lamp or a sconce or a chandelier — you’re buying an accessory that lights up,” says designer Sergio Orozco.

Decorative lighting rates today as one of the best accessories you can buy. “If chosen correctly, it is as important to a room as your best piece of furniture,” says Orozco, a New York-based furniture and lighting designer. “It reflects your taste and adds the finishing touch.”

Fixed or portable, lighting has become an all-important interior design feature. “Homeowners are beginning to seek out lighting as decorative elements,” says Jody DeVine marketing communications manager for Sea Gull Lighting Products, the New Jersey-based lighting manufacturer.

According to the experts at the American Lighting Association (ALA), there are three major movements:

CASUAL ELEGANCE continues the creation of warm, relaxed and cozy environments, with casual lighting that is a little more upscale in design.

SOFT CONTEMPORARY is still, clean, modern and simple in style. While architectural in design, these fixtures are no longer cold.

SIMPLIFIED TRADITIONAL removes the excess. “While still a traditional look, this look is not ornate,” says Orozco. “There is now a simplification. Decorative lighting here may still be solid brass, but stripped down and rich with an antique patina.”

In step with home decor trends, the lighting industry is experiencing an explosion of design options and material combinations. “Eclectic is really the word that best reflects the range of colors, styles, shapes and sizes of decorative lighting available,” says Joe Rey-Barreau, educational consultant for the American Lighting Association and assistant professor of interior design at the University of Kentucky.

This season’s savviest styles have common design elements. “There has been a big move recently to more daring designs and material combinations — wrought iron with crystal, polished brass with colored glass,” says Rey-Barreau. “At the same time, traditional product is still available. Today, if you want a Williamsburg polished brass fixture, you can find it. But if you are looking for a Murano glass medusa head with a low voltage bulb to light up a room, you can find that, too!”

Finishes range from rich and refined to lustrously weathered. “We are moving away from shiny brass and china to more burnished, brushed and hand painted finishes,” says DeVine.

Hand painted doesn’t mean simply white enamel with painted flowers. Instead, think multi-toned finishes with depth and texture — layers of color; hand-rubbed, burnished metal; finishes flecked with gold or silver and rubbed so color shines through.

“There is also a move toward heavy iron, and rust finishes are still important as is oil-rubbed bronze,” says Kevin Herdt, Certified Lighting Consultant for Austin Bluffs Lighting, a Colorado lighting showroom. “Amber glass is becoming more a preference for homeowners, as well.”

Other fresh features to look for in decorative lighting include:

LARGER SIZE FIXTURES: “More large-size fixtures is a result of the move to larger homes,” says Rey-Barreau. “Homes with large interior volumes need larger lights and the industry has complied.”

CHANDELIER RESURGENCE: Once confined to dining rooms and entry halls, chandeliers are hanging around almost any room in the house. “The trend is back to light in the center of the room,” says Rey-Barreau. “As a result, you are seeing chandeliers everywhere — bathrooms, bedrooms, closets, hallways — anywhere one will fit.”

QUALITY MATERIALS: The focus shifts to the real deal as consumers opt for true glass instead of plastic, stainless steel instead of aluminum. Look for beautiful marble, supple leathers and tactile iron.

LOWER COST: A benefit of recent manufacturing trends is the deflation of price in decorative lighting fixtures. “What cost $1,500 five years ago may be found today for $900,” says Rey-Barreau. “At the same time, there are incredible lamps available for $30.”

ENERGY EFFICIENCY: From adding dimmers to using the latest low-voltage bulbs, consumers are looking to save energy when they can. Cost-effective fluorescent bulbs become more important in all aspects of lighting.

SIDEBAR

DÉCOR LIGHTING

Few things make as much design impact on a room as the right lighting. Whether you choose a portable lamp or installed fixture, decorative lighting melds the best in home fashion with a function. To help you make the most of your decorative lighting, the experts at the American Lighting Association (ALA) offer the following ideas for illuminating your home — no matter what your budget.

FOCUS POCUS: Put lighting to work creating focal points. Add lights to direct the eye in a new direction by focusing on a piece of art, furniture or the mantel.

MOVE IT: Simply moving portable lighting around to new areas can create dramatic differences. Adding or subtracting light from parts of a room creates drama.

COLOR IT BEAUTIFUL: A coat of paint and well-placed lighting can completely change a room. Fresh paint can give an old fixture new look or create the opportunity to add new fixtures to anchor or complement the color.

DIM SOME: Dimmers are another inexpensive trick-of-the-trade. They help set a special mood in the home by allowing you to manipulate the light. Install them at the wall for ceiling fixtures and even buy them for table lamps.

MADE WITH THE SHADE: Today’s shades are made of a variety of shapes, textures and designs. Top off an old fixture with a smart new shade for a fresh look. Add lampshades to chandeliers, or take off the existing lampshades for a fresh face.

START SMALL: You don’t have to redo the whole room to get a whole new look. Dress up fixtures with accessories like candle sleeves, garland or cloth over the chain.

SPACE CASE: Add more drama to a space with accent lighting — illuminate the top a bookcase, add under cabinet lighting or hang a colored pendant over the kitchen island. “You can create islands of light that bring the grain of wood or the print of the wallpaper or the color of a wall to life,” says lighting designer Sergio Orozco.

TABLE IT: “Table lamps are so important, but often ignored,” says Joe Rey-Barreau, ALA director of continuing education. “They are critical to design, they are at eye level and we touch them daily. Move them around the room. If you buy small ones, you can put them on shelves. They make a room more visually complex.”

QUALITY COUNTS: No matter what your budget, opt for timeless materials like bronze and glass over their plastic counterparts. Timeless designs in top materials will always look right and can become family heirlooms.

TEST IT: Try before you buy. “In most instances, you can take a lamp home, try it and bring it back if it doesn’t work,” says lighting designer Sergio Orozco. “Exchange it for one that doesn’t reflect on your glass table or has a different shade.”

DO YOUR HOMEWORK: There is a wealth of information on the Internet, particularly in lighting and decor.  Review your options–from energy-saving innovation to the latest style trend–research new product information to find what will work best for your home or office design.  Consult with lighting professionals to help customize a plan that will illuminate  and enhance your environment effectively, efficiently and decoratively.

Visit a Capitol Lighting showroom or 1800lighting.com for professional lighting advice or a complementary lighting plan customized to your specifications.

The kitchen is one of the busiest and most heavily-used rooms in your home. When it comes to fires, it’s also perhaps the most dangerous. With various fluids being used, such as oils and water, along with electrical appliances, heat sources, and more, it doesn’t take much for a simple mistake to lead to a potentially devastating blaze suddenly bursting to life. When it comes to kitchen safety, knowledge and care can go a long way, as can preparation should a fire ever start. Check out these valuable tips for learning how to avoid electrical fires in the kitchen and how to deal with one that starts.

The kitchen frequently uses water, oils, greases, and other substances alongside electricity in numerous situations. Your appliances all likely run on electricity, including your refrigerator, garbage disposal, dishwasher, and possibly even your stove and oven. While most of these devices are designed to keep all potentially-sensitive electronics away from any possibly damaging fluids, you likely still have exposed electrical plugs, extension cords, and more running along your countertops.

It doesn’t take much for a kitchen fire to start. Perhaps the most common type is a grease fire. If you ever work with hot oil on the stovetop, you’re probably well aware of how dangerous this substance is. In addition to having an extremely high burn risk, a single spark could cause a grease or oil source to quickly ignite, becoming a massive and difficult to deal with ordeal. This means you should be extremely cautious when using electricity to cook. Regularly inspect your plugs and cords for any signs of wear or fraying, and you should immediately stop using a device if you find any exposed copper at all—the risk of a potential fire far outweighs the cost of replacing a broken appliance.

Your microwave is a particularly interesting appliance in that it reacts violently with any metal placed inside it. If you’re not paying attention, it’s not difficult to accidentally stick something that isn’t microwave-safe in there, and usually by the time you figure it out it’s already too late.

If a fire does erupt in your microwave, opening the door should NEVER be the first thing you do. Fires need oxygen to breathe, and opening the door allows the oxygen to get in quickly, allowing the fire to grow and spread, and your problem will only get worse. Instead, the first thing you should do is unplug the device if possible and allow the fire to suffocate itself and go out before opening the door. Before you do, be prepared to dial 911.

Putting out a fire in your kitchen is rarely as easy as throwing water on it. In fact, in most cases water actually makes the problem worse. If you have an electrical fire, throwing water on it will probably only encourage more sparking and increase the chances of injury by electrocution. If you have a grease fire, throwing water on it will only cause the grease to splatter and continue to burn, potentially spreading the fire further (after all, water and oil don’t mix).

If you have a grease fire in your kitchen, the best way to put it out is to smother it and deprive it of oxygen. If the fire is contained in a pan, the best way to smother it is to use a metal lid to cover the pan and cut off the oxygen supply. If you don’t have a metal lid, a large baking sheet will do the job. Just make sure you use oven mitts or some other form of hand protection when you finally remove it. If the fire spreads outside the pan, cover it with salt or baking soda to quickly and effectively put the fire out. These substances are made from non-flammable material, and will quickly cover and suffocate the fire from oxygen if applied properly. Electrical fires can generally be fought the same way, but you should always move to unplug the device first if possible. You don’t want to keep sending electricity through a short any longer than you have to.

Finally, every kitchen should have a fire extinguisher in it. If you don’t, pick up a small Class B or Class ABC unit from your local hardware store (they’re not very expensive). These devices are approved to fight grease and kitchen fires because the retardant they use is dry, thus meaning you won’t have to worry about splattering that you would otherwise face with a different type.