Summer is in full swing which means you’re likely spending more time in a hot tub. If you don’t currently own a hot tub but are considering getting one in the near future, there are some important things to consider before purchasing. It’s a no brainer that water and electricity don’t mix; therefore, adhering to proper safety and electrical protocol with hot tub installation and maintenance is imperative. Listed below are Expert Electric’s 5 tips for hot tub safety:

You might consider yourself to be quite the handyman; however, setting up a brand new hot tub is an entirely different animal. Wiring a hot tub is no easy task and it’s far more complex than setting up your average home appliance. Consulting a licensed electrician for a hot tub installation will often save you time, money, and a trip to the hospital. A licensed electrician will minimize any costly mistakes you would make that could result in permanent damage to the hot tub and a void in the hot tub manufacturer’s warranty. Additionally, they will ensure you’re getting the best value in all of the necessary accessories that need to be purchased for installation.

Although this usually isn’t a problem if your home was built within the past 30-40 years, it’s always a good thing to look into before adding an additional appliance to your home. This is another area that a licensed electrician can help with. It’s also crucial to understand what type of voltage your hot tub is running with. Smaller hot tubs usually require 120 volts whereas larger hot tubs will often run on 240 volts. Understanding the different requirements associated with your specific hot tub’s voltage and how it relays to its power source is key.

When it comes to hot tub installation, it’s all in the wiring. Using the proper wiring is critical to the functioning and safety of your hot tub. It’s important to use wiring that is able to handle the heat. A licensed electrician will be able to answer any questions you have about wiring and determine which type of wiring is necessary for your hot tub.

Did you know that Canada has a set of electrical codes that must be followed when installing and maintaining any type of electrical equipment in Canada? These codes must be followed accordingly during the installation. The Canadian Electric Code is a handbook that can be purchased online; however, it’s a long read and fairly expensive. Hiring a licensed electrician will save you the chore of reading it and void its additional cost.

Before installing a hot tub, it’s imperative to consider its location. You’ll need room for the hot tub as well as extra room to get in and out. The hot tub should be at least 10 feet away from any overhead power lines and 5 feet away from the removed spa panel. It’s also important to consider how the tub will connect to its power source.

For further information on hot tub installation and the necessary electrical requirements, please visit our contact page for a local number near you or to fill out one of our online forms. Our team of licensed electricians are here to help ensure your hot tub gets installed safely and efficiently.

Replacing an old light with something a little more modern sounds simple enough, but is takes a special skill set to pull it off safely. It is a much better idea to hire somebody who has the training to make lighting upgrades without endangering their own safety and the safety of your home. You need an electrician. Glendale homeowners can rely on The Electric Connection to provide high quality service.

Light fixtures are a common home improvement job and can really make a huge difference to the look and feel of a room. Taking a trip down the lighting aisle of the home improvement store is fun and will likely inspire you to change up your own home. You will get plenty of ideas for improvements to make to your own home. However, those improvements are not quite as easy as it may look. You will want to make sure any new light fixture is installed correctly with no fears the wiring will be compromised and risk starting a house fire.

A Glendale electrician can help you transform your house into an exciting and well-lit home you can be proud of. You can have the joy of picking out the perfect light fixture and let the electrician do all the heavy lifting so to speak. A qualified electrician will ensure the wiring is done correctly and will not pose a safety risk. Check out all the gorgeous fixtures that would help transform your dining room into an inviting space for family dinners. While the electrician is there, a dimmer switch is perfect for the dining room. Chandeliers can be extremely bright and can interfere with an intimate atmosphere. A dimmer switch gives you the luxury of controlling just how much light is emitted. Give The Electric Connection a call today and schedule your lighting upgrade.

Older homes have their charm, but as anyone living in one can tell you, they also come with more than their fair share of issues. Building and electrical codes have changed dramatically over the years, and our everyday electrical demands have continued to skyrocket. At Kolb Electric, we don’t want to discourage anyone from living in the home of their dreams.  That said, we do want people to be safe, so if you currently live in or are thinking of moving into an older home, here are some things you should be on the lookout for.

Electrical wires can function for a long time, especially if they haven’t been damaged and if the insulation hasn’t become brittle and flaked off. Even knob and tube wiring, an old standard for wiring that hasn’t been used in years, can still keep the lights on. Age does catch up with wiring eventually, however, and if the insulation fails, by becoming abraded, being chewed, or any number of other reasons, a short or electrical arc could start a fire.

Older homes often have wires surrounded with a spiral metal jacket. Metal-clad wires are still used today, especially in areas where the wire is exposed to potential damage. Armor-clad wires are distinct and do not have a separate ground wire within the metal sleeve, instead using the sleeve itself as the ground. As a result, for fire safety reasons, armor-clad wires are often barred in new construction.

If you can see obvious signs of a problem, including scorch marks on terminals in switches and outlets, missing or damaged insulation or any other signs that look potentially dangerous, you should call Kolb Electric for home rewiring before you expose your home to a live wire.

Restoring old chimneys and relining flues are common expenses of owning an older home. Here’s what happened: as coal started to become readily available, existing homes were retrofitted with central heating systems. Nowadays, most coal-fired systems have been converted or updated for oil or gas, but many are still vented into unlined chimneys. Where chimney liners are present, they are usually made of terra cotta and can rapidly deteriorate with higher-combustion, energy-efficient heating equipment.

When evaluating a heating system, make sure you consider its age, type, condition, and efficiency. For example, an old cast iron boiler may last a century or more, but updating to a more modern system can reduce your future heating and maintenance costs.

Old plumbing systems are notorious for being a mish-mash of old and new materials, especially as additions are added to the home or kitchens and bathrooms are remodeled. Iron and lead piping can become clogged with corrosion and mineral deposits, and typically need to be updated in sections. Cast iron piping is even worse, and can corrode from the inside, becoming thin, pitted, and cracked. Horizontal sections are usually the first to go—especially if chemicals drain cleaners containing sulfuric acid have ever been used.  Unless the home has already had repiping done, you can almost guarantee you’ll need to do it yourself.

Unless your roof is under 80 years old and / or is made of slate, you can bet it’s probably not original to the home. There are numerous types of roofing materials, all with unique life expectancies and maintenance requirements. Many older homes have multiple additions with roofs of different ages and types, so like the plumbing system, individual sections may need to be replaced.

If you’re moving into an older home, make sure you have it inspected thoroughly beforehand to make sure it’s safe. And if you need electrical maintenance in Maryland, Virginia, or Washington, DC, call Kolb Electric today!