Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

One of the things that makes electrical troubleshooting so difficult is the fact that your electrical system is largely behind the scenes. Located behind your walls and in your ceiling, many issues will not manifest until they become very serious. As a result, it can be very easy to ignore electrical problems until they come to a point where they can no longer be ignored. To combat this, especially if you live in a n older home, you should have an electrician in Santa Monica inspect your electrical system regularly. By doing so, you can avoid many issues that result from an aging home and electrical system.

In addition to having a regular inspection, you should also educate yourself on the early signs of electrical issues. If you notice any of the below, make sure that you get in touch with a Santa Monica electrician right away. It can save you significant time and money if you take care of the issue early on, rather than when it becomes a real problem.

Lights Dim Unexpectedly

Do you have lights that dim whenever large appliances, such as your air conditioner cycles on? If these high-demand appliances are not on dedicated circuits, then they could be causing electrical issues within your home.

No GFCI Outlets

According to most local building codes, a ground fault circuit interrupter (GFCI) outlet is required in all areas that are frequently wet. This includes kitchens, bathrooms, utility rooms and garages. If you do not have these, call The Electric Connection or click here.

Ungrounded Outlets

Older homes were often equipped with outlets that do not accept three-pronged, grounded plugs. This is a very strong indication that your electrical system is not grounded. If you have an ungrounded electrical system, then you could be exposing yourself to unnecessary dangers every time you use your electrical system. Have someone inspect your system and provide the proper grounding if necessary.

Using air ducts in order to distribute both heated and cooled air throughout a building is one of the most common ways in which homeowners choose to keep their homes comfortable all year long. Doing so, of course, means that your air ducts are in play throughout the entire year. Are you certain that yours are in the condition necessary to perform their job precisely as intended? If not, give FB Electrical Services a call today. We are more than happy to thoroughly test your air ducts so that you know what kind of shape they are in. Once we have completed your duct testing in Somerville, we can go about resolving any problems that we may find with your air ducts. That way, you can heat and cool your home at peak performance and efficiency levels.

When you stop and think about it, you have likely seen very little of your air duct system. For the most part, your ductwork is hidden from view. The last thing that you want to do, though, in terms of your ductwork, is to develop an “out of sight, out of mind” attitude in regards to their condition. Leaky ductwork is one of the main sources of energy loss and low efficiency in many homes, and it is also one that professional duct testing can help to pinpoint the source of. When we test your air ducts, we can determine with certainty if it is compromised, and we’ll have the information we need in order to right whatever wrongs we may find.

Be sure to observe these simple tips to make your holiday decorating a safe and fun experience for the whole family:

In addition to using LEDs, there are a few other ways you can save money with your holiday decorating. Consider using a timer to ensure that your lights only run between sundown and bedtime, which will help keep your energy bills under control. And be sure to invest in sturdy storage containers to protect your lights and other delicate decorations when they’re packed away.

These tips will help you keep your home and family safe throughout the holidays, but if you ever need additional help planning your electrical light display or with other electrical issues, contact an experienced and licensed electrician.