Electrical work is no joke. If left in the hands of an inexperienced or unqualified electrician, the results can be disastrous. Poor electrical work can leave you at risk of electrocution or electrical fire, and even if these issues don’t occur, it will still lead to ineffective operation. To prevent your breakers from tripping and your lights from flickering, among other things, you’ll want to do your research and make sure that the electrician you hire is the best for the job.

Hoffman Electrical has been providing electrical services throughout Florida since 1989. We can help you find an electrician in the St. Petersburg, FL area with the tips below!

The best electricians in St. Petersburg tend to share similar qualities. So when you’re doing your research, make sure you look for certain key qualifications. We recommend checking out the following:

When you’re looking for quality electrical work at an affordable price, call Hoffman Electrical. We proudly serve the St. Petersburg area, providing home and building owners with the best electricians for their specific needs and the most cost effective services. When you choose us as your St. Pete electrical company, you’ll receive:

The Seattle Mariners may have just upped their game when they retrofitted their clubhouse with an LED lighting strategy focused on intensifying the moods, energy levels and performance of their players.

In an article published in Architectural SSL, Stan Walerczyk highlights five core areas of our life where lighting effects human physiology and performance:

Circadian Rhythms — a case study by Ephesus Lighting, when the University of Phoenix replaced their metal halide fixtures with LEDs, they experienced a 75% reduction in energy consumption, a statistic that probably took the sting out of the initial investment. The long-term benefits of LED lighting (less maintenance, a reduced carbon footprint) offer less in the form of immediate gratification, but trickle their gifts throughout future generations.

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

If you are planning to start working out of home, it’s crucial that you have a designated work space. The best way to create a home office work area that’s productive and functional is to update your home office wiring. Turning that spare bedroom or a new room over the garage or even an extension into a home office is something that you would have to plan well.

Even the simplest of work spaces have some or the other electrical equipment and appliances and you would need appropriate electrical wiring, powerpoints, and circuits and plug points etc. for it. Aside from this, you would require Internet connectivity as well. Most homes have Wi-Fi, and even if all your office equipment like the PC, printers, scanners, phones and tablets are Wi-Fi enabled, it’s best to have a hardwired Ethernet connection in your home office.

That increases the reliability of the service and you won’t be inconvenienced due to an erratic Internet connection. While it may seem like a very simple job, the fact is that installing home office wiring isn’t an easy job and has to be done with care.