The weather is heating up, and with it, so is the load on your electrical system. Don’t let the stress pile up. Protect your electrical system – and your wallet – from the stresses of summer with the help of these simple tips.

Is your electrical system bearing the burden of your poor appliances choices? Don’t become a victim of “operator error” by overlooking these seasonal adjustments to appliance use:

Heating and cooling comprises about 30-50 percent of your electric bill, making it one of the biggest stressors on your electrical system. However there are many ways to reduce that stress, including…

Your refrigerator is among the largest consumers of energy in your home. Keep a lid on energy consumption by…

The water heating is typically the third largest energy expense in your home. The hotter the temperature of the water, and the more it is used, the harder your electrical system is forced to keep up with the heating demands. Summer is hot enough! Cool your use by…

Hanging clothes on the line rather than running the dryer, the second largest energy-consuming appliance in your home, can keep your home and energy bills from becoming too hot to handle.

Using your stovetop or oven in summer’s heat can really put a strain on your air conditioner and electrical system. Save some dough and maintain comfort by firing up your grill instead.

Today’s homes use a multitude of gadgets and appliances that can cause a considerable amount of stress to your electrical system. Give your system the TLC it deserves:

Turning off items that are not in use rather than letting them run such as lights, laptop and mobile devices, TVs, radios, and more can take a lot of pressure off your electrical system. How much? Lighting in the average home accounts for 12 percent, and electronic devices another 10-15 percent. Whew!

Vampire power can really drain you, sucking up five percent of your power bill or more – all for nothing. Among the biggest offenders putting a strain on your electrical system (even when they’re turned off): TVs, computers, microwaves, cell phone chargers… anything with a power adaptor, indicator light, standby function, or clock. Unplug these items or plug them into a power strip, flipping them off when they’re not in use.

Your electrical system can suffer stress from issues outside of your home as well. Are you closing your eyes to these electrical stressors from your home’s great outdoors?

Outdoor lighting fixtures are heavily used and a great place to take a load off. Updating to more modern technology for outdoor lighting such as motion sensors, timers, and photocells for sensing daylight, in addition to CFL and LED bulb technology, can not only save a pretty penny in energy wasted on unnecessary illumination, but boost security as well.

Is the outdoors infringing on your indoors? Your home’s thermal envelope – the outer walls, windows, doors, floors, ceiling – may need support in the form of adequate insulation and air sealing to keep your home comfortable and help you avoid the stress of unnecessarily high energy bills. Ease the hardship on your wires and your wallet by putting this on the top of your priority list.

Electrical system all stressed out? Contact Mr. Electric today!

Last night, thousands of walkers and hundreds of runners in Edinburgh kicked off the Courtesy of NVA.org.uk

A bunch of research went in to creating this light up gear to meet the NVA’s head designer James Johnson’s following standards:

For the runners, the design team wanted something dramatic, so they ended up going with concentrated point source LEDs, which looked great both close and at a distance. The LEDs allowed them to mix color and adjust intensity of the lights remotely. The runners themselves had to be in tip-top shape, able to run 10 miles at a 9-10 minute pace in all kinds of weather. Therefore, as to not hinder them in their physical feat, the design team fashioned a webbing suit out of the LEDs, complete with a radio and battery pack. Check them out:

The only shortcoming of these suits was that they couldn’t be powered by the runner’s motion. After attempting to harvest energy via knee braces, they determined any impediment to the runner’s motion dramatically affects his or her performance.

For the walkers, Johnson and his team wanted to build something subtler, to provide adequate safety lighting, but not to distract from the viewing experience. They decided to go with staffs/walking sticks illuminated by a combination of electroluminescent tape, fiber optic fabric, and diffused and non-diffused LEDs. Each staff housed a micro-computer that would synch up the flashing patterns with the Orchestra’s score, with changes triggered by movement and altitude. And here they are:

The research team was able to use motion to generate power in this instance, since walking is a more leisurely, steadier movement. To harness the power of movement, two LEDs, two high power Neodymium magnets, and a copper coil go in the top of the staff, then as the walker strides along, striking the stick against the ground, one of the magnets oscillates through the coil, creating a small electrical current. One LED lights up when the magnet travels down, and the other when the magnet travels up, producing a twinkly effect.

The runners also received a smaller version of this staff in the form of a baton.

There’s something exciting about making a large purchase: the rush of buying, the nagging fear that you can’t afford it, the anticipation of it making your life better or easier.  This feeling is especially true when it comes to a new appliance; it’s an investment in saving you time and effort. What if the investment you just made turns out to be a dud because of overlooking the impact it would have on your electrical system?

A lot of the work of an appliance happens within the machine, we tend to not think about the fact that an appliance is really a very complicated electrical machine. In addition, we ignore that they require a lot of electricity to operate. They can really strain your electrical system. This is especially true of modern appliances; it seems like they’ve found a way to computerize everything, and that only makes the power needs of an appliance grow even when they are “Energy Star” rated. Installation of these complex modern appliances seem as easy; some almost seem like they only need to be plugged in and forgotten. This approach neglects the fact that there are important things to keep in mind with regards to appliance installations that can cause serious problems for you down the line.

Obviously, you don’t always need to call an electrician whenever you install an appliance. With that being said, there’s nothing wrong with doing so if you’re not sure what you’re doing. The Best Dallas Electrician you can hire can help you avoid a lot of potential hazards and costs down the line. If you’re still planning on installing your new appliance yourself, keep in mind the following electrical safety do’s and don’ts: