Is it time to replace your old dryer? Great news: The federal Energy Star program has started certifying clothes dryers, making it easy to pick out the most cost-effective and efficient models. Read on to find out what the change means and how to pick out the best model for your home.

Moisture and Heat Settings

The upside is clear: “ENERGY STAR certified dryers use 20 percent less energy than conventional models without sacrificing features or performance,” the program promises. So what took so long for dryers to get the federal efficiency stamp of approval?

“With dryers there are fewer major variables to manipulate — mostly it’s drying time and the amount of heat provided,” said Emilio Gonzalez, a Consumer Reports test engineer, so it was harder to find adjustments to meet the standard.

How did manufacturers finally find the extra energy savings?

The savings are not trivial. Energy Star claims that if every household in America switched over, consumers would save a total of $1.5 billion annually in utilities. The reduction in pollution would be the same as taking 2 million cars off the road.

Upgrade the Laundry Room

The first certified models are already available -- find a list of them on the Energy Star directory, which allows you to compare size, fuel type, energy use and other factors.

If you have a gas hookup in your laundry room, consider purchasing a gas-powered dryer. These models have a higher price tag but are more efficient across the board than their electric cousins. No matter what kind of dryer you buy, make sure you adhere to the following tips so you get the most for your money:

Saffron’s Drift Light is here to help. The Drift Light is like a normalAmanda Kooser reviewed the Drift Light earlier in the month. Kooser reports that during the first night, she was highly aware of the way the light was dimming, but during the next few nights, she never caught the light turning off because she was already asleep. As somone who claims to have “notorious” sleeping troubles, this would imply that the Drift Light works pretty well.

Kooser says that since you know the LED light bulb will dim over the course of 37 minutes, it’s easy to plan for the light to turn off around the time you want to fall asleep. The most compelling statement Kooser makes about the Drift Light: “There is something soothing about the world dimming around you. It’s like being a kid with an early bedtime, sensing the sun set outside your window.”

I’m interested to see if this product will become popular. Have you ever tried anything like this to improve your sleeping habits? Leave a comment, and let us know!

Everything seems fine, then POOF–your power goes out. Chances are, you tripped a circuit breaker. Electrical problems are one of those things that tend to make a homeowner’s stress level skyrocket. You’re not sure what’s wrong, but suddenly you’ve lost access to the power you depend on in your DC area home! 

A breaker can trip for many reasons. Below are the tops 5 causes of an electrical breaker tripping in your home.

Looking for electrical repair in Washington, DC? Contact Kolb today!

A breaker trip comes as a result of a circuit tied to your circuit breaker exceeding its safe parameters. They can be identified by a sudden loss of power to specific appliances (those that used a dedicated circuit, like a fridge or microwave), or a loss of power in your home that is limited to a specific area.

There are a lot of issues that can result in breaker trips, but there are the ones our DC electricians address most often during electrical repairs in Washington, DC:

Looking for superior service and quality from your electrician? Contact Kolb Electric for electrical repair in Washington, DC!

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.