You might be a fan of their appearance, but aluminum light poles bring more to the table than just their looks. Whether you opt for squared or rounded varieties, these light poles have become more popular than ever. This is thanks to their impressive ratio of strength to weight, as they are sturdy while still being lightweight. Additionally, they feature a high resistance to corrosion. These advantages, coupled with their recyclability, make aluminum light poles a perfect match for sustainable projects and harsher environments.

Aluminum is a great material to use when you’re prioritizing strength and reliability. However, just as important as the variety of light pole is the installation procedure. If your poles don’t have proper installation, you could be losing out on the benefits of the lights. A sloppy installation by the wrong people compromises everything from the reliability of the lights to your safety.

Not all vibration is bad, but the destructive form of it can cause serious damage over time as cracks begin to form and then spread along the pole’s side. If the pole’s movements are not equal in either direction, it is simply usual sway, and therefore no reason for concern.

On the other hand, if it is constantly moving back and forth an equal distance, with the motion based at the center of the pole’s shaft and not on top, you’re seeing potentially destructive vibration. Eventually, this can lead to the pole shaft cracking and falling, breaking just above the part of the base where the weld held it together.

Several factors contribute to pole vibration. These include the pole shape, the surrounding environment and the installation. Whoever performs the installation needs to follow the appropriate guidelines for the size and type of pole, as each pole can handle a certain load. If your installer uses the wrong light fixture, destructive vibrations could be inevitable.

Every installation job will have its requirements, based on the client’s needs as well as the location in question. One aspect that doesn’t change, however, is the importance of safety. Light pole installations fall under the umbrella of electrical work, which is always a dangerous area for anyone who isn’t an expert. Any piece of electrical equipment improperly installed can become a safety hazard, and aluminum light poles are no exception.

Your installer must comply with local codes and requirements as applicable. As such, they need to provide proper electrical groundings. Failure to do so can be a serious violation of important safety regulations. Worse, it can lead to a very dangerous situation for you and anyone exposed to the light poles.

What are electric bikes? A lot of people may be surprised at the mere fact that electric bikes even exist, but their history goes back even to the late 1890s. Different U.S. patents dating back to the 1890s actually mention the existence of said bikes! Sometimes also referred to as e-bikes, this special bicycle is actually a bicycle that features an electric motor that is normally utilized to power up an ordinary vehicle. These kinds of bicycles actually rely on a rechargeable battery and can even attain speeds as high as 15 miles per hour or 20 miles per hour. Of course, this all depends upon the specific laws of the country in which these kinds of bicycles are sold!

The good thing about these electric bikes is that they can be utilized as an alternative form of transportation to cars and even normal bikes! Believe it or not, these kinds of bicycles are actually quite good for people who are suffering from heart problems, but still are told to get more exercise into their lives. According to an entry on Wikipedia, these types of bicycles require a lot less cardiac exertion, which is good news to people who already have established heart problems.

When it comes to the cost issues of an electric bike versus the costs behind cars, you can bet your bottom dollar that choosing these types of bikes is more cost-effective than buying or maintaining a car. Let’s look at just one aspect of this consideration, which is in regard to the price of gas to operate either kind of vehicle. With electric bikes being limited to just 20 miles per hour according to American law, you do not even need to pay for a special registration, insurance or license, unlike a car! Further, according to the website called Eco Wheelz, it takes just about 10 cents to charge a battery for this bicycle! With gas prices in the U.S. hovering near $4 already, and with most cars getting just 25 miles on the gallon, it is obviously a lot more expensive to buy, own and maintain your car.

On the issue of safety, electric bikes have a little bit farther to go before they can be considered totally safe. Take for instance China, which is the world’s biggest market for these kinds of bicycles. There is road traffic safety concern in general over these kinds of bikes because they oftentimes use the same lanes as slower-moving normal bicycles and even pedestrians.

As you can see, electric bikes are an alternative to cars and regular bicycles. They are allowed in the U.S. and are more cost-effective than cars, although there may well be some safety concerns attached to this type of bicycle.

If you are working with electricity, it is important to know how to safely install an organized electric wiring layout.  Fires and accidents can be caused by faulty electric wiring layouts, so it’s important to be able to recognize potential hazards and avoid them whenever possible.

Although this job may be The electric wiring layout for your home will vary according to what room you are doing the wiring for. In any case, it’s a good idea to draw a diagram of the layout first. The diagram will help you determine what lighting or appliances are needed, where they will be located and what sort of outlets will be necessary for each item.

Next you should determine which tools and Because it is so important to have your electric wiring layout installed safely, here are a few tips you should be aware of during the installation process:

The little community of Victoria Park in central Florida is beating out Los Angeles when it comes to saving electricity on street lighting. Last November, I wrote a blog post about the street lighting program here in Los Angeles, which is currently yielding higher-than-expected energy savings — 60% compared to the expected 40%. Well, that’s something to crow about regardless of what they’re doing in Victoria Park.

The Nitty-Gritty in L.A.

Electricians are using LEDs to replace the conventional incandescent bulbs in 140,000 Los Angeles street lights. Maintenance costs for LEDs, though not as significant as electric bills, also take a smaller bite. Nothing to be sneezed at! LEDs are good for the City budget, good for climate change, and good for energy independence.

An LED (Light Emitting Diode) is a light created by the kind of tiny parts that are in a computer. LEDs are used, for example, in many kids’ light sabers. They’re brighter and use a lot less electricity than the incandescents that you and I screwed into sockets when we grew up. As for what Victoria Park is up to….

Electricians Retrofit Gas Lights in Victoria Park, Florida

Victoria Park is now upping the ante. Electricians are retrofitting its gas-burning street lights with special LEDs that will save the community 92% on its combined energy and maintenance bills.

Victoria Park is a planned community in central Florida. Residents enjoy the charm of real gas-lit street lights, but the expense is a concern. As the community builds out, the annual costs for gas and maintenance were being projected to top $1,000,000 a year, just for street lighting.

When residents formed a committee to look into alternatives, the committee hit upon low-voltage LEDs. While typical house current runs at 110 volts, low-voltage current can run at around 24 volts, reducing power needs.

Victoria Park is now retrofitting their existing street lights with low-voltage LEDs. The retrofits, an innovation by Solas Ray™ Lighting in Anderson Indiana, look, for all the world, like real gas lights. They mimic the look of a candle flame. The lights create charm and a warm glow, but also five times more light than each pole would create with gas. Not to mention the 92% energy and maintenance savings. In fact, the Mayor of the City of DeLand, where Victoria Park is located, awarded Solas Ray a proclamation of appreciation for saving Victoria Park residents nearly half a million dollars in 2010.

Fortunately for all of us, in the energy efficiency race, we all win as cities out-do each other to help out their budgets and help the environment.

Want to save energy in your home or business?

One of the specialties of my electrical contracting company, The Electric Connection, is energy-efficient lighting. Call us to discuss your lighting needs (800) 990-9490.

Kim Hopkins

CEO, The Electric Connection.

Visit our company profile.

The secret of creating a great home entertainment system is designing a layout that fits into your home while keeping hidden as much of the understructure (i.e. the wiring) as possible. To achieve this, some homeowners hire professional electricians to send wires through the walls and ceiling. But people often take on the work as a do-it-yourself hobby. Although this is a much better DIY project than, say, attempting to install a furnace or an air conditioning system on your own (you should never try either), it can sometimes lead to wiring issues that are difficult to diagnose and fix. When problems crop up, it’s best to call in an electrician with knowledge of home entertainment systems to assist you.