We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

Most homes today have the capacity to handle 220 volts in their electrical systems. Modern dryers, stoves, hot water heaters and other appliances all use the high voltage standard, which can deliver twice as much as the 110 volts used by computers, televisions, smaller appliances and other electronics. Chances are your house already has the ability to use 220 volts, but some older homes do not and therefore have no way of powering more heavy-duty equipment. Fortunately, with the help of an electrician, you can add 220 volt service to your home, or run more 220 circuits if you need to add extra outlets.

Bringing in Maximum Voltage

Modern homes hooked up to the electricity grid take in energy from the utility company at 220 volts, which is then split into two 110 volt lines. Those lines are what bring electricity to your conventional outlets, so you can plug in and use your devices without overloading them with power. Homes built in recent years can therefore accommodate 220 volt circuits as well, which can be distinguished in the circuit box because the switches they use are twice the size of those for 110 volt circuits.

Older homes, however, sometimes only have the capacity for 110 volts in total. If that is the case in your home, you will need to upgrade if you want to use many modern appliances, and certainly if you want to sell your home or bring it up to speed on local code issues. If you aren't sure if your home has 220 volt service, call up your utility company, or have an electrician come take a look.

Adding in Extra Circuits

If you don't have 220 volt service, the electric company will have to run a new line into your home, and an electrician will need to replace your circuit box and possibly all your internal wiring as well, particularly if it uses outdated technology like aluminum wires or knob and tube. The process will not be cheap – costing a few thousand dollars at the low end – but as a result, you will improve the safety of your home and may be able to qualify for lower homeowners insurance rates.

If you, like most people, already have 220 service in your home, but need to add more circuits at the higher capacity, the job will be a lot easier. An electrician can add extra circuits to your breaker box so you can power whatever equipment you need. Make sure you specify if you need 3-wire circuits, which are used for most electric water heaters and boilers, or 4-wire circuits, which are more common for stoves and dryers.

Making the Grade in Safety

Remember, upgrading the wiring in your home can be dangerous work with stringent local building code standards. Unless you are already a qualified contractor, you should have an experienced electrician complete the work for you to ensure that it is all done safely and correctly. If you need to upgrade your home to 220 volt service, call up an expert electrician today.

If you are planning to start working out of home, it’s crucial that you have a designated work space. The best way to create a home office work area that’s productive and functional is to update your home office wiring. Turning that spare bedroom or a new room over the garage or even an extension into a home office is something that you would have to plan well.

Even the simplest of work spaces have some or the other electrical equipment and appliances and you would need appropriate electrical wiring, powerpoints, and circuits and plug points etc. for it. Aside from this, you would require Internet connectivity as well. Most homes have Wi-Fi, and even if all your office equipment like the PC, printers, scanners, phones and tablets are Wi-Fi enabled, it’s best to have a hardwired Ethernet connection in your home office.

That increases the reliability of the service and you won’t be inconvenienced due to an erratic Internet connection. While it may seem like a very simple job, the fact is that installing home office wiring isn’t an easy job and has to be done with care.

Being the owner of a plant is a big responsibility and it is very important to keep your equipment in working condition. You need to remember that all your maintenance must be planned in an efficient way for both economic and energy efficiency.

Usually when you choose to partake in your routine maintenance, it may cause a delay in your production resulting in loss of income. All safety electrical equipment that is used on a continuous basis will require a lot more maintenance than your equipment that is used rarely, although they will still need to be maintained.

Even though you may maintain your equipment on a regular basis there will be times that your equipment could break. You will then need to take all costs into consideration before deciding whether you should repair the equipment or to just replace it completely.

To help you decide, you should analyze what you have already spent on the equipment as well as what it will cost to maintain it in the future. Once you have done that you should compare it to what it would cost you to acquire newer equipment that may cost less to maintain.

You could also hire a specialist that could create a breakdown of important factors such as the probability of the following:

To run a successful plant you will also need to keep the following important steps in mind:

If you are big on decking your home out for the holidays, now is the time to start thinking about your holiday decorating needs. October through January is a big season for outdoor decorating. Going big with lots of lights, inflatable snowmen or a scary scene all require the services of an electrician in Pasadena. It can be a lot of fun to have the best decorated house on the block, but it requires a lot of electricity to run all of the lights, air machines and moving figures. The team at The Electric Connection is ready to help you get your home ready for the best holiday display on the block.

All of those lights require a lot of outlets. Running extension cords across the lawn can be a bit of an eyesore as well as a safety hazard. Extension cords can get damaged by heavy foot traffic or be tripped over. If you can avoid using a lot of extension cords, it is a good thing. Your Pasadena electrician can help you do just that by installing multiple outdoor outlets around the yard and the house. This will allow you to plug your lights and decorations directly into an outlet without worrying about an extension cord. It will look better and be safer.

For those who like to go big, you have probably run into tripping breakers when somebody in the house wanted to use the microwave or run the furnace. If you have to sit in the dark inside the house while your light display is running outside, you probably need to call an electrician. Pasadena homeowners who do elaborate light displays should consider having an additional panel or dedicated breaker to run the lights. This ensures your lights will always be on—inside and out. Give The Electric Connection a call today and schedule your holiday home lighting upgrade.