How do tripped circuit breakers happen in the first place? An overloaded circuit is the most common reason for a breaker tripping and usually happens when a circuit has more electrical load connected to it than it really should have. Let’s say you have a 15 Amp circuit breaker that is protecting a 15 Amp circuit. If 20 Amps of current start flowing through it because a toaster, TV, radio and space heater were all connected to the same circuit and were on at the same time, then what you’re left with are tripped circuit breakers aimed to prevent overheating of the circuit.

Allow Kolb Electric, one of the premier electricians in Alexandria, Arlington, Fairfax and all of Northern VA, to guide you through the process of resetting tripped circuit breakers, which is actually quite easy.

If your breaker continues to trip immediately after you’ve reset it, this is indicative of a direct short. Do not try to reset your breakers at this point. If these steps don’t help you resolve your tripped circuit breaker problem, it’s time for you to contact a quality electrician in Virginia who can uncover the source of the problem, which could be due to one of the following:

There are some jobs out there that you can very well do all on your own. But there are others that need the guidance and experience of a certified electrician in Gaithersburg. Considering a renovation or remodel for your home and not sure what you’ll need an expert for? Follow along with the team at Kolb Electric to find out!

It can be tempting to try your hand at electrical work, particularly if you think a job is simple. But at Kolb, our team would really, really recommend that you almost never attempt electrical work on your own.

Why? Primarily because of safety. It can be very easy to get an injury when doing electrical work, even for a professional. But also because a lot of work requires certain certification for the job to be within electrical code, which is a legal matter you don’t want to be on the wrong side of.

Here are our top “this needs an expert” picks:

Planning on doing a remodel and need the experience and skill of a certified electrician in Gaithersburg? We’re the team for you! Our experts are top-class when it comes to comprehensive electrical service, and we’re always happy to help. Contact us today to find out more about our services, or to plan your remodel with our electrical professionals!

Among the more obvious pieces of electrical safety advice you may have encountered is to never saw the third prong off of an electrical plug in order to fit it into a two-prong outlet. But just because we can recognize that as a self-evidently bad idea doesn’t mean everyone knows why it’s dangerous.

Two-prong outlets have only two wires: a hot wire and a neutral wire. But a three-prong outlet also has a ground wire, which is a safe place for unexpected bursts of current to go when they occur. Without that connection between the ground wire and the plug, wild current can go anywhere: into your electrical device, where sensitive components can be destroyed, or worse, into your body. Shock and electrocution are more likely to occur when no ground wire is present.

Moving On Up

Three-prong outlets didn’t become standard in North American homes until the late 1960s, so while modern homes should be in good shape, there are plenty of homes out there with old two-prong outlets.

As a quick fix, you might be tempted to use adapters that convert two-prong outlets to fit three-prong plugs. You should resist the urge to use these so-called “cheater plugs”, however -- the ground wire is there for safety, and simply bypassing it creates a potentially serious hazard.

Instead, you should seriously consider upgrading the outlet if you need to regularly use three-prong plugs in that area. If you live in an older home where most of the outlets are two-prong, this is an upgrade you’ll need to do sooner or later.

When it comes to upgrading two-prong outlets, there are two basic options. The best choice is to have ground wires installed so that the outlets are fully up to the current standard. Unfortunately, this can involve several hours of electrical service and may require some cutting into walls, depending on how many outlets are being upgraded and how the home is configured. It may be a big undertaking, but it’s a quality investment in your home and safety.

A cheaper alternative is to upgrade to a ground fault circuit interrupter outlet, or GFCI. These outlets are capable of shutting themselves off if an electrical shock risk is present, but they won’t protect sensitive electronics from surge damage. The trade-off is that there’s no need to run a ground wire.

Out With the Old, In With the Old?

If you don’t like either of these options but you’re having trouble with a two-prong outlet, it’s technically not a violation of code to replace the outlet with another two-prong version. Just keep in mind that this arrangement leaves both people and electronics vulnerable, so use these outlets with care and consider making a plan to upgrade later.

Ready to upgrade those old outlets? Start the process today by scheduling a no-obligation consultation with your licensed, local electricians.

If you’ve never visited the DIY, home renovation blog Young House Love, you’re in for a treat. John and Sherry, bloggers extraordinaire, are renovating their home step-by-step, giving their readers a detailed look into the process. Every day they have some new clever project to write about. (And the way they tell stories gets addictive, quick).

The blog has a ton of posts on home lighting, some technical, some crazy and fun. Today, I thought I’d share with you my 3 favorite DIY lighting projects from Young House Love: